The biogeochemical cycling of methane in Ria de Vigo, NW Spain: Sediment processing and sea–air exchange

Methane (CH₄) concentrations were measured in the water column, in sediment porewaters, and in atmospheric air, in the Ría de Vigo, NW Spain, during both the onset (April 2003) and at the end of (September 2004) seasonal upwelling. In addition, CH₄ concentration and stable isotopic signatures (δ¹³CH₄) were measured in porewaters, and sediment methanogenesis and aerobic oxidation of CH₄ were determined in sediment incubations. Surface water column CH₄ (2 m depth) was in the range 3–180 nmol l^− 1 (110–8500% saturation) and followed a generally landward increase but with localised maxima in both the inner and middle Ría. These maxima were consistent with CH₄ inputs from underlying porewaters in which CH₄ concentrations were up to 3 orders of magnitude higher (maximum 350 μmol l^− 1). Surface water CH₄ concentrations were approximately three times higher in September than in April, consistent with a significant benthic CH₄ flux driven by enhanced sediment methanogenesis following the summer productivity maximum. CH₄ and δ¹³CH₄ in sediment porewaters and in incubated sediment slurries (20 °C) revealed significant sediment CH₄ oxidation, with an apparent isotopic fractionation factor (r_c) of  1.004. Using turbulent diffusion models of air–sea exchange we estimate an annual emission of atmospheric CH₄ from the Ría de Vigo of 18–44 × 10⁶ g (1.1–2.7 × 10⁶ mol). This estimate is approximately 1–2 orders of magnitude lower than a previous estimate based on a bubble transport model.     

The importance of polynyas, ice edges, and leads to marine mammals and birds

The correlation between areas of open water in ice-covered seas and increased biological productivity has been noted for some time. To date, most attention has been focused on larger polynyas, such as the Northeast Water and the Northwater. Although spectacular in their own right, these large polynyas represent only part of a vitally important continuum of biological productivity that varies significantly between geographic areas and ice habitats, that includes the multi-year pack of the polar ocean and small localized polynyas in annual ice. Surveys of the distribution and abundance of ringed seals in the Canadian Arctic Archipelago have shown differences in density that are correlated with the presence or absence of polynyas. There is also significant variation in the biological productivity of polynya areas of the Canadian High Arctic Archipelago and northern Greenland, all of which receive inflow from the polar basin. Long-term studies of polar bears and ringed seals in western Hudson Bay and the eastern Beaufort Sea show significant but dissimilar patterns of change in condition and reproductive rates between the two regions and suggest that fundamentally different climatic or oceanographic processes may be involved. Projections of climate models suggest that, if warming occurs, then the extent of ice cover in Hudson Bay may be among the first things affected. Long-term studies of polar bears and ringed seals in the eastern Beaufort Sea and Hudson Bay would suggest these two species to be suitable indicators of significant climatic or oceanographic changes in the marine ecosystem.     

A KBS application for market research advice in transport

This paper presents some results of a knowledge based system (KBS) development applied to market research (MR) issues in transport. This application represents a rule production approach to decisions associated with the definition of appropriate survey procedures for various operation‐management problems in a transport enterprise or agency. The basic idea is to provide an aid for the user (manager, student or practitioner), who is concerned with MR, but is not very familiar with this field or has some concerns over data‐gathering and the use of that information. It focuses on specific applications in the transport environment and gives the user some support in maintaining greater consistency in his (her) decisions.

The objective of this paper is to describe the system structure, to point out some important aspects and problems arising during its development and also to make some comments with respect to the further development of this and similar systems.     

The evolution of urban traffic control: changing policy and technology

Abstract

The history of urban traffic control (UTC) throughout the past century has been a continued race to keep pace with ever more complex policy objectives and consistently increasing vehicle demand. Many benefits can be observed from an efficient UTC system, such as reduced congestion, increased economic efficiency and improved road safety and air quality.

There have been significant advances in vehicle detection and communication technologies which have enabled a series of step changes in the capabilities of UTC systems, from early (fixed time) signal plans to modern integrated systems. A variety of UTC systems have been implemented throughout the world, each with individual strengths and weaknesses; this paper seeks to compare the leading commercial systems (and some less well known systems) to highlight the key characteristics and differences before assessing whether the current UTC systems are capable of meeting modern transport policy obligations and desires.

This paper then moves on to consider current and future transport policy and the technological landscape in which UTC will need to operate over the coming decades, where technological advancements are expected to move UTC from an era of limited data availability to an era of data abundance.     

安全系统和新能源汽车 汽车电子发展的两大引擎

汽车行业目前正面临着诸多挑战,包括提高车辆的安全性,并且让车辆具有更好的燃油经济性。汽车电子产品是所有这些解决方案的核心。与此同时,为了满足中国等快速发展的新兴市场的需求,汽车成本必须保持在绝对最低限度。因此,可以看到业内正出现越来越多的协作开发,例如宝马和标致雪铁龙投入1亿欧元（1.382亿美元）联合开发混合动力车。两个主要增长领域更多汽车功能的使用,     

Design of Nonlinear Controllers for Active Vehicle Suspensions Using Parameter-Varying Control Synthesis

Nonlinear suspension controllers have the potential to achieve superior performance compared to their linear counterparts. A nonlinear controller can focus on maximizing passenger comfort when the suspension deflection is small compared to its structural limit. As the deflection limit is approached, the controller can shift focus to prevent the suspension deflection from exceeding this limit. This results in superior ride quality over the range of road surfaces, as well as reduced wear of suspension components. This paper presents a novel approach to the design of such nonlinear controllers, based on linear parameter-varying control techniques. Parameter-dependent weighting functions are used to design active suspensions that stiffen as the suspension limits are reached. The controllers use only suspension deflection as a feedback signal. The proposed framework easily extends to the more general case where all the three main performance metrics, i.e., passenger comfort, suspension travel and road holding are considered, and to the design of road adaptive suspensions.     

Train boarding and alighting rates at high passenger loads

Line capacity in metro and high‐frequency suburban railways is as much determined by station stop times as by factors such as line speed or train acceleration. This paper applies the method developed by London Underground to estimate the time that trains spend at stations, as a function of the physical characteristics of the situation (e.g. train door width) and the numbers of passengers involved. Analysis was carried out on a number of alternative designs for refurbishment of South West Trains' Class 455 inner‐suburban rolling stock. Whilst there is indeed an interaction between boarding and alighting passengers, this paper demonstrates that the LUL relationship breaks down at the highest passenger loads. Moreover, results indicate that passenger flow is not equal between different parts of the same group of boarders or alighters.     

Competition and Ownership in Land Passenger Transport: The Sixth International Conference,Cape Town,South Africa,September 1999 - Part 2

This paper presents an overview of some recent developments in and policy issues relating to integrated transport systems in the European Union (EU). Both goods and passenger transport systems are considered in the context of actions recently undertaken and supported by the EU. The paper considers the very general background of these systems at the EU scale and offers insights into some recent successful and promising policy, real-life, and research attainments. In addition, it attempts to identify some directions for future actions in fields such as transport policy, transport technology, transport economics and transport scenarios.     

The use of recovery time in timetables: rail passengers’ preferences and valuation relative to travel time and delays

Transportation - Recovery time in the rail industry is the additional time that is included in train timetables over and above the minimum journey time necessary often with the explicit aim of...