Fatigue analysis of butt welded AH36 steel joints: Thermographic Method and design S–N curve

The traditional methods of fatigue assessment of welded joints have some limitations, and are extremely time consuming. In order to overcome these difficulties, the Thermographic Method (TM), based on thermographic analyses, has been applied to predict the fatigue behaviour of butt welded joints, made of AH36 steel, largely used in shipbuilding. Experimental tests have been carried out to assess the fatigue capability in terms of S–N curves and fatigue limits. The predictions of the fatigue capability obtained resorting to the Thermographic Method show a good agreement with those derived from the traditional procedure. Moreover, the fatigue design recommendations were compared to the experimental data in order to analyse the reliability of the codes.     

Computational fluid dynamics-based multiobjective optimization of a surface combatant using a global optimization method

The main objective of this article is to describe the development of two advanced multiobjective optimization methods based on derivative-free techniques and complex computational fluid dynamics (CFD) analysis. Alternatives for the geometry and mesh manipulation techniques are also described. Emphasis is on advanced strategies for the use of computer resource-intensive CFD solvers in the optimization process: indeed, two up-to-date free surface-fitting Reynolds-averaged Navier-Stokes equation solvers are used as analysis tools for the evaluation of the objective function and functional constraints. The two optimization methods are realized and demonstrated on a real design problem: the optimization of the entire hull form of a surface combatant, the David Taylor Model Basin—Model 5415. Realistic functional and geometrical constraints for preventing unfeasible results and to get a final meaningful design are enforced and discussed. Finally, a recently proposed verification and validation methodology is applied to assess uncertainties and errors in simulation-based optimization, based on the differences between the numerically predicted improvement of the objective function and the actual improvement measured in a dedicated experimental campaign. The optimized model demonstrates improved characteristics beyond the numerical and experimental uncertainty, confirming the validity of the simulation-based design frameworks.     

Graph Trace Analysis and Generic Algorithms for Interdependent Reconfigurable System Design and Control

This paper discusses current research for development of model-based generic algorithms for design and control of reconfigurable interdependent systems. This work is based on extension of Graph Trace Analysis (GTA), which was originally developed in the 1990s for power distribution system design. Because of GTA's ability to combine and restructure analysis methodologies from a variety of problem domains, it is now being used for integrated power distribution and transmission system design, operations, and control. Over the last few years research has begun to formalize GTA into a multidiscipline approach that uses generic algorithms and a common model-based analysis framework. The paper provides an overview of the concepts used in GTA, and then discusses how GTA and generic algorithms can be used together for design and control of multidiscipline systems. This new approach includes decoupling component and system level equations, using iterators to structure iterative analysis that simplifies coordination of discrete events and also eliminates the need for large matrices, using composition to implement polymorphism and simplify data management, using dependency components to structure analysis across different systems types, and implementation of hot-swappable algorithms.     

Habitat characteristics as determinant of the structure and spatial distribution of epibenthic and demersal communities of Le Danois Bank (Cantabrian Sea, N. Spain)

The purpose of this paper is to detect and describe general trends in the spatial distribution of epibenthic and demersal communities of Le Danois Bank (El Cachucho) in relation to the environmental variables that characterize their habitat by means of multivariate ordination. Data were derived from two multidisciplinary surveys carried out in October 2003 and April 2004 included in the ECOMARG project. The surveys were focused on the study of the physical scenario, including both geological (seabed characterization from bathymetry and backscatter data) and hydrographic features, and the different compartments of the benthic fauna (endobenthic, epibenthic, suprabenthic and demersal communities). For the present study, epibenthos and demersal species were sampled using two different gears, a 3.5 m beam trawl and a Porcupine 39/52 type baca otter trawl respectively. The total species richness combining both samplers ascended to 221, including 71 species of fishes, 65 crustaceans, 35 molluscs, 29 echinoderms, 10 cnidarians and 5 sponges.Multivariate methods were used for the study of the characteristics of communities and habitats. Hierarchical cluster analysis was applied to calculate and visualize similarities between samples in terms of species composition. To assess the amount of variation of faunal densities related to a set of eight environmental variables, a redundancy analysis (RDA) was used. The set of environmental variables used were: depth, near-bottom temperature and salinity, sedimentary typology (dry weight percentages of coarse sands, medium and fine sands, silt and organic matter) and seafloor reflectivity. Using the spatial distribution of the ranges of depth and seafloor reflectivity that characterize the habitats of the faunal assemblages we defined the spatial distribution of the different communities.The multivariate analysis of 18 beam-trawl samples and 15 otter trawl samples showed the existence of 4 main assemblages associated with the more characteristic habitats of the area. The Callogorgia–Chimaera community live mainly in the areas at the top of the Bank (425–550 m depth), where the sediment coverage is lower and there exists a high presence of rocky outcrops. The Gryphus–Galeus community were found in the areas at the top of the Bank covered by medium and fine sand sediments with low organic matter content. The Phormosoma–Trachyrincus community live on the sedimentary terraces that characterize the Bank break (550–800 m) and the Pheronema–Deania community occupy all the deeper (800–1050 m) sedimentary grounds of the inner basin.     

A suggestion of gap flow control devices for the suppression of rudder cavitation

This paper presents the numerical analysis of rudder cavitation in propeller slipstream and the development of a new rudder system aimed for lift augmentation and cavitation suppression. The new rudder system is equipped with cam devices which effectively close the gap between the horn/pintle and movable wing parts. A computational fluid dynamics code that solves the Reynolds-averaged Navier–Stokes equations is used to analyze the flow field of various rudder systems in propeller slipstream. The body force momentum source terms that mimic flow field behind a rotating propeller are added in the momentum equations to represent the influence of the propeller and its slipstream. For detailed explication of the new rudder system’s lift augmentation and cavitation suppression mechanism, three-dimensional flow analysis is carried out. Simulations clearly display the mechanism of the lift augmentation and cavitation suppression. The computational results suggest that the Reynolds-averaged Navier–Stokes-based computational fluid dynamics reproduces the flow field around a rudder in propeller slipstream and that the present concept for a cavitation suppressing rudder system is highly feasible and warrant further study for inclusion of the interaction with hull and mechanical design for manufacturing and operations.     

不同类型逆变器功率损耗和输出电压品质的比较

重点对不同类型逆变器馈电的传动系统的功率损耗和输出电压品质进行了比较,逆变器类型包括采用dv/dt或正弦波滤波器的硬开关逆变器以及谐振或准谐振逆变器.谐振逆变器以ZCS谐振逆变器为代表,准谐振逆变器以直流环节采用高频变压器的ZVS准谐振逆变器为代表,给出了仿真和试验结果.在PSPICE环境下,模型仿真几乎全部使用实物.数字仿真时,采用异步电机和电缆组成的高频模型.实验测量是在现有逆变器实验模型上进行的,此模型专用于检测带有dv/dt(或正弦波)滤波器选件的逆变器功能.测量时使用了LEM Norma D6100功率分析仪和一台基于PC平台的功率分析仪,并采用多功能插件NI-Daq 6024E和在LabVIEW环境下开发的控制软件.     

A two-dimensional response to a tropical storm on the Gulf of Mexico shelf

Surface current data from drifting buoys and remotely sensed wind data recorded over the continental shelf in the northeastern Gulf of Mexico during the passage of tropical storm Josephine in October 1996 are examined. Drifter data show the existence of a strong surface jet (velocities reaching 1 m s⁻¹) that moves up the west Florida shelf and westward along the Louisiana–Texas shelf, and lasts for nearly 1 week. The coastal jet occurs during an intense synoptic scale wind event where wind speeds reach 15 m s⁻¹. A simple force balance and statistical analysis are performed to assess the role of strong wind forcing. The primary balance shows an Ekman-type current. The role of local acceleration is greatest when winds are directed along bathymetry. A simple two-dimensional strongly forced shelf response model developed from the linear steady-state momentum equations also indicates larger along-shore currents due to both Ekman-type forcing by cross-shore winds and a cross-shore pressure gradient arising from conservation of mass. Model parameters fit empirically are within 15% of theoretical values. The simple model explains 30% and 46% of the variance in the observed along-shore and cross-shore surface currents, respectively.     

Variability of the western Galician upwelling system (NW Spain) during an intensively sampled annual cycle. An EOF analysis approach

The key features of the western Galician shelf hydrography and dynamics are analyzed on a solid statistical and experimental basis. The results allowed us to gather together information dispersed in previous oceanographic works of the region. Empirical orthogonal functions analysis and a canonical correlation analysis were applied to a high-resolution dataset collected from 47 surveys done on a weekly frequency from May 2001 to May 2002. The main results of these analyses are summarized bellow. Salinity, temperature and the meridional component of the residual current are correlated with the relevant local forcings (the meridional coastal wind component and the continental run-off) and with a remote forcing (the meridional temperature gradient at latitude 37°N). About 80% of the salinity and temperature total variability over the shelf, and 37% of the residual meridional current total variability are explained by two EOFs for each variable. Up to 22% of the temperature total variability and 14% of the residual meridional current total variability is devoted to the set up of cross-shore gradients of the thermohaline properties caused by the wind-induced Ekman transport. Up to 11% and 10%, respectively, is related to the variability of the meridional temperature gradient at the Western Iberian Winter Front. About 30% of the temperature total variability can be explained by the development and erosion of the seasonal thermocline and by the seasonal variability of the thermohaline properties of the central waters. This thermocline presented unexpected low salinity values due to the trapping during spring and summer of the high continental inputs from the River Miño recorded in 2001. The low salinity plumes can be traced on the Galician shelf during almost all the annual cycle; they tend to be extended throughout the entire water column under downwelling conditions and concentrate in the surface layer when upwelling favourable winds blow. Our evidences point to the meridional temperature gradient acting as an important controlling factor of the central waters thermohaline properties and in the development and decay of the Iberian Poleward Current.     

Recent sedimentary study of the shelf of the Basque country

The Northern Iberian margin of the Spanish Basque country (provinces of Gipuzkoa and Viscaia) is characterized by a narrow continental platform, which receives inputs of riverine particulate matter from the numerous riverine systems located within the Basque country. This particulate matter is subsequently deposited within the Bay of Biscay, and Gouf de Capbreton [Frouin, R., Fiuza, A.F.G., Ambar, I., Boyd, T.J., 1990. Observations of a poleward surface current off the coasts of Portugal and Spain during winter. Journal of Geophysical Research 95 (C1), 679–691]. The main goal of this study is to establish a map of the surface sediment distribution of the Basque continental shelf and more specifically to map the muddy patch located at the eastern side of that continental shelf.Three oceanographic cruises were conducted in 2003 and 2004. From these campaigns 340 surface samples, 12 short cores and 3 gravity cores have been collected over the mid and outer shelf from depths ranging between 50 m and 150 m deep. 3 seismic profiles were obtained across the shelf mud patch using a Sparker device.Sediment grain-size analyses were performed by the classical physical method of sieving and use of settling columns. The POC (Particular Organic Carbon) amounts in sediment and water samples were determined using the Strickland and Parsons' method [Strickland, J.D.H., Parsons, T.R., 1972. Determination of particulate carbon. In : A practical handbook of seawater analysis. Fisheries ResearchBoard of Canada, Ottawa, pp. 207−211] as adapted by Etcheber [Etcheber, H., 1981. Comparaison des diverses méthodes d'évaluation des teneurs en matières en suspension et en carbone organique particulaire des eaux marines du plateau continental aquitain. Journal de Recherche Océanographique VI (2), 37−42]. Radioisotopic measurements (²¹⁰Pb_exc) were made using a semi-planar germanium detector coupled to a multichannel analyser. Radiographical analysis was performed with an X-ray equipment (SCOPIX®) coupled with a radioscopy instrumentation and processing unit.Firstly, a detailed sedimentological map of this shelf has been produced and secondly, geophysical surveys have precisely mapped the geometry of the main mud patch on the continental shelf. In the mud patch itself the rates of sedimentation are between 0.13 and 0.50 cm yr^− 1. The maximum rate of sedimentation is located in the central mud patch, whereas the minimum rate of deposition occurs close to the rocky outcrops. These results seem to be in agreement with the estimation of the total thickness of the mud patch revealed by seismic profiles. The central part corresponds to the maximum thickness of 7 m.Interpretations of the associated oceanic current forcing factors (current direction, wave fetch and wind directional modes) relating to the identified sediment depositional zones are also undertaken.     

Modeling nonlinear roll damping with a self-consistent,strongly nonlinear ship motion model

Appropriate modeling of roll damping is one of the key issues in accurately predicting ship roll motion. The difficulties in modeling roll damping arise from the nonlinear nature of the phenomena. In this study, we report a new effort in modeling the bilge keel roll damping effect based on the blocking mechanisms of an object in the potential flow. This effect can be implemented as a component of appropriate ship motion models. We used our digital, self-consistent, ship experimental laboratory (DiSSEL) ship motion model to test its effectiveness in predicting ship roll motion. Our numerical experiment demonstrated clearly that the implementation of this roll damping component improves significantly the accuracy of numerical model results (the results were compared with ship experiment data from the Naval Surface Warfare Center, Carderock Division, Maneuvering and Seakeeping Facility).