A review of shipboard large-scale energy storage systems北大核心CSCD

储能系统是船舶中的重要设备,可为各类船舶负荷提供能源。随着电力推进技术的成熟,全电船舶已成为未来船舶设计的主要方向。在此背景下,储能系统将由主要为辅助负荷供能逐步发展到为多类型船舶负荷供能,特别是作为船舶动力系统的重要组成部分与各类船舶主/辅机配合,在满足船舶各类负荷需求的前提下提高船舶的经济/环保特性。功能角色的转变加速了大规模储能系统接入船舶,带来了储能系统的状态估计、能量管理、优化规划等一系列问题。首先,对目前的储能技术进行分类;然后,介绍典型全电船舶的分类方法并指出储能系统的应用场景;最后,提出大容量储能系统接入船舶后带来的若干亟待解决的技术问题,即船舶储能系统分布式控制、船舶储能系统适应性规划与优化,以及船舶储能系统状态评估。所做研究可为未来大规模储能系统在电力化船舶上的应用研究提供参考方向。     

Thermal anaysis of an electric water pump for internal combustion engine vehicles

An electric water pump for engine cooling system has an advantage which particularly in the cold start, the use of the electric water pump saves fuel and leads to a corresponding reduction in emissions. However, the electric water pump for internal combustion engine generates much more heat loss than that for hybrid electric vehicle or electric vehicle since it is operated by electric power of high current and low voltage. In this study, the fluid flow and thermal characteristics of the canned type electric water pump with an inverter integrated has been investigated under the effects of heat generation. The analysis conditions such as outdoor air temperature of 125°C, water pump speed of 6000 rpm, coolant temperature of 106°C and coolant flow rate of 120 L/min were used as a standard condition. Therefore, the thermal performance of the canned type electric water pump’s motor and inverter was evaluated by comparison with that of mechanical seal type. In the motor, the temperature reduced by over 10°C, and in the inverter, the amount of temperature decrease equaled to the maximum temperature difference, about 18.7°C. Also, canned type electric water pumps of variable materials were compared for the evaluation of thermal transfer performance for variable thermal conductivity of a can. The motor and inverter were cooled lower to 42°C at motor and about 40°C at inverter for reasonable selection of can’s thermal conductivity.     

Vibration path analysis and optimal design of the suspension for brake judder reduction

Brake judder is abnormal vibration, which is mainly generated by uneven contact between the brake disc and pad. The abnormal vibration from BTV (Brake Torque Variation) is transferred to the suspension and the steering system during braking. In this paper, judder simulation is carried out using a multi-body dynamic analysis program to analyze the relationship between judder and the transfer mechanism, which consists of the suspension and the steering system. In order to verify the analytical model, test results are compared with the simulation results. A sensitivity analysis is also carried out. In addition, an optimization method is presented for judder reduction, using the design of experiments.     

Improved hot-stamping analysis of tubular boron steel with direct measurement of heat convection coefficient

There are two types of hot-stamping processes, direct and indirect, depending on the sequence of the heating, forming, and quenching steps and the method used for each step. In this study, an indirect hot-stamping process consisting of forming at room temperature, heating, and water quenching was applied to develop a coupled torsion beam axle. The analysis results indicated that the application of the heat convection coefficient is critical in the simulations and must take into account the temperature and specific location in the model to ensure the accuracy of the heating and quenching analysis. The heat convection coefficients used in the analysis were directly measured at various positions of the tube (e.g., outside, inside, and bending region) using thermocouples, and the final values were determined through correlation between the actual tests and numerical analysis. The experimental and simulated final deformed shape and temperature distribution were in good agreement.     

Fatigue life estimation of injection mold core using simulation-based approach

The purpose of this study is to present a simulation-based approach capable of predicting the fatigue life of a mold core with the help of CAE technology based on injection molding simulation, core stress analysis and fatigue life prediction. Injection molding simulation is performed in order to obtain the non-uniform pressure acting on a mold core due to the polymer melt flow during injection molding process. Subsequently, the melt pressure profile is used as loading condition for core stress analysis via one-way coupling technique. The lifetime of a mold core is then predicted by fatigue analysis with stress-life approach. For verification of simulation-based approach to the fatigue life prediction, tests were also performed.     

Impact of SME blended fuel combustion on soot morphological characteristics in a diesel engine

The soot morphological study and NOx emissions of soybean oil methyl ester (SME) in a passenger diesel vehicle were investigated experimentally. The soot morphological characteristics were conducted at various injection pressures, engine speeds and engine loads. Soot sampling and image processing analysis with a scanning electron microscope (SEM) were used to investigate the influence on particulate morphologies. The dimensions of average primary particles and the size of the radius of gyration were gradually decreased as injection pressures increased at all operating engine conditions. The average radius of gyration was increased with increasing engine load, while the average primary particle size decreased. NOx emissions were gradually increased with the increasing injection pressure at all operating engine conditions.     

Wall-wetting model based method for air-fuel ratio transient control in gasoline engines with dual injection system

Modern gasoline engines with dual injection system improve combustion efficiency by using the two injection commands simultaneously. Due to the different dynamics in the two injection paths, the transient air-fuel ratio (A/F) performance when the injection authority is changed remarkably affects the emission performance of the engine system. For this kind of engines, this paper proposes a model-based design approach that gives a dynamic feedforward compensation for achieving good transient A/F performance. Actually, this work centers on discussing the mean-value model parameters for characterizing the wall-wetting phenomenon when the port injection authority is changed under different engine operation conditions. Moreover, from the view of practice, taking into account the event-based physics of the engine system, significant calibration for the model parameters that are employed for achieving the feedforward compensation is investigated experimentally. Finally, experimental validation results demonstrate the improvement of the transient A/F performance by using the control scheme.     

Development of estimation algorithms for vehicle’s mass and road grade

In controlling the longitudinal motion of electrified vehicles such as hybrid vehicles and PHEV (Plug-in Hybrid Electric Vehicles), the variation of the driving resistance loads (or driving loads) such as road grade and actual vehicle mass, is the most influential factor which limits the control performance. Measuring the driving load is not impossible, but it is costly since additional sensors have to be mounted on the vehicle. In this study, methods for estimating vehicle mass and road grade are designed to compensate for the driving loads. The proposed methods are verified using simulation tools and then evaluated experimentally.     

Highly reliable driving workload analysis using driver electroencephalogram (EEG) activities during driving

Traffic accidents are caused by various factors, which can be classified into human factors, vehicle factors and environmental factors. Recently, human factors have been drawing particular attention as efforts are being made to enhance the safety performance of vehicles and improve road conditions. Driving distraction caused by an increased driving workload is a representative human factor. Various studies in the past have attempted to quantify the driving workload by using EEG activities. However, they have failed to consider vibration properties generated from vehicle engines. A number of noise signals were included in brainwave signal processing, which resulted in a failure to obtain reliable outcomes. Thus, this study suggests driver EEG activities free of vehicle engine secondary vibration in order to develop a method that analyzes the driving workload with high statistical reliability. By using the analytical method developed in this study, standard values of driving workload for straight and left-turn driving that has statistical significance could be calculated. The analytical method for driving workload created by this study can be applied to HVI and road design.