Discomfort of vertical whole-body shock-type vibration in the frequency range of 0.5 to 16 Hz

Shock-type vibrations are frequently experienced in vehicles excited by impulsive input, such as bumps in the road, and cause discomfort. Current national and international standard weightings were primarily developed for assessing exposure to sinusoidal or random vibrations and not impulsive excitations or shocks. In this experimental study, various shock signals were systematically produced using the response of a one degree-of-freedom vibration model to hanning-windowed half-sine force input. The fundamental frequency of the shock was varied from 0.5 to 16 Hz at a step of 1/3 of an octave. The magnitude estimation method was used for fifteen subjects to compare the discomfort of shocks with various unweighted vibration dose values between 0.35 ms^−1.75 and 2.89 ms^−1.75 at each frequency. The equivalent comfort magnitude of shock showed greater sensitivity at frequencies less than 0.63 Hz and at the resonance frequency of the human body between 5.0 Hz and 6.3 Hz. The frequency weighting constructed by using both the equivalent comfort magnitude and the growth rate of discomfort obtained in this study was compared with the current standard weightings, W_b of BS 6841 and W_k of ISO 2631. The derived weightings for shock were applied to the acceleration of the shocks, and an enhanced correlation was proved between the magnitude estimations and the weighted physical magnitude of shock.     

Development of an electric motor-driven pump unit for electro-hydraulic power steering with 42V power-Net

Motorization in vehicles is expanding rapidly for fuel efficiency, customer comfort, convenience, and safety features. These new electric loads represent an increase in the required electric power. This has generated interest in new, higher power systems such as the 42V Power Net. The electro-hydraulic power steering (EHPS) system is one of these systems. This paper presents the development of the electric motor-driven pump unit for the EHPS system using a 42V power-Net. The interior type permanent magnet synchronous motor (IPMSM) can be applied to this system with more power density per volume for compactness of the EHPS. In order to improve the system, the IPMSM and its control method was optimized for improved torque characteristics and electric power consumption. The performances of both the pump unit and the IPMSM have been verified by experimental results. Finally, all in one type the electric motor-driven pump unit are developed from the experiment verification.     

Experimental validation of a mathematical model of a reed-valve reciprocating air compressor from an automotive-braking system

Mathematical simulation is the process of designing a model of a real system and then conducting experiments with the simulation to understand the system’s behavior. Mathematical simulation is widely used for investigating and designing compressors, and with a minimal number of simplifying assumptions, mathematical models can be used in conjunction with modern computing tools to solve complicated problems. A considerable amount of previous research has focused on the mathematical modeling of reciprocating air compressors used in automotive braking. The aim of the present work was to experimentally validate the mathematical model for such compressors. We present a simplified and effective mathematical model for estimating compressor performance, and this model can easily be executed using personal computers. Parameters such as compressor speed, discharge pressure and clearance volume were evaluated in terms of their effect on the thermodynamic behavior of compressors. The model can predict cylinder pressure, cylinder volume, cylinder temperature, valve lift and resultant torque at different crank angles; it can also predict the free air delivered and the indicated power of the compressor. Therefore, the model has been validated using experimental results.     

Method for analyzing epicyclic gearboxes

This paper presents a method for analyzing epicyclic gearboxes by evaluating the speeds, torques and power of the external elements in epicyclic gear mechanisms, as well as the total ratios of the gear box. The method is based on the equations that describe each epicyclic gear mechanism and rules that assign appropriate codes to the external elements. The method emphasizes how power flows are transmitted through the epicyclic gears, as well as power losses. Analysis of an epicyclic gear box is performed to illustrate the proposed method.     

On Control Laws for Vehicle Suspensions Accounting for Input Correlations

Input correlations involving time delays are common in active vehicle suspension system problems. One approach to control law derivation fur such systems is to restrict attention to slate feedback laws in the interests of practicality and it is then of interest to determine the law which is, in some sense, the best. Under assumptions which are common in this area. relating to input, system and cost Function forms, a new derivation of the expression for the cost, accounting for time delays, is given. The use of the expression in numerical procedures for determining effective control gains is discussed and an example for a half car planar vehicle model is described. By comparing results with existing ones which are truly optimal, an estimate is made of the loss of performance which results from the restriction of the control law form in this case. Some generalisation of the results is attempted and they are placed in a contemporary context at the conclusion.     

直流车辆用蓄能器

直流车辆用文中所述的蓄能器能在显著降低功率消耗的同时,又在节能方面迈出了重要一步,而且车辆可在局部无接触导线区运行.样车试验证实了这些设想.     

Georgia Ports Authority： Faster to Market, Better for Business

The Port of Savannah is the fourth largest container port of the ＂five＇global U.S. ports.     

Aircraft Landing Gear Dynamics: Simulation and Control

The landing gear is an inevitable system for the aircraft. It absorbs the energy of the landing impact and carries the aircraft weight at all ground operations, including take off, taxiing, and towing. Numerical simulation has become an invaluable tool for the assessment of landing gear dynamics as well as of aircraft/landing gear interaction. This paper gives an overview of the landing gear requirements and illustrates landing gear operational conditions, i.e., the shimmy problem, the dynamics at touch down and at ground roll. Furthermore, three software packages used in the simulation of aircraft ground dynamics are presented. A look at flight simulators and landing gear test facilities follows. Finally, the possible application of controlled landing gears is discussed.     

铁路货车防盗系统设计

针对铁路运输的货物在途中被盗现象，提出了货车、集装箱防盗系统的设计原理，给出了系统硬件结构示意图和软件设计框图并对其在 Ｔ Ｍ Ｉ Ｓ中的使用前景进行了展望。