Tractor Handling during Control Loss on Sloping Ground

Tractor behaviour on sloping ground following a control loss due to rear wheel locking is examined. A mathematical model to predict the tractor trajectory is presented and the results obtained from this model are compared with those obtained from experiments with a remotely controlled tractor.

Reasonable agreement is reached between measured and predicted results - the discrepancies arise from limited tyre data or local random variations in slope, ground roughness or tyre/ground frictional values.

Within these limitations, the model is used to examine possible driver strategies following a control loss. Applying and maintaining full lock for this particular type of accident appears to improve safety; it certainly tends to avoid the worst situation in which the tractor accelerates backwards down the slope and reaches dangerously high speeds although inevitably it increases the likelihood of a low speed overturn.     

A note on the age of radioactive tracers

The age of a water mass is often estimated experimentally using the radio-age computed from the distribution of a radioactive tracer (radiocarbon, helium–tritium). Deleersnijder et al. [J. Mar. Syst. 28 (2001) 229.] have shown that the radio-age underestimates the age of the water and is larger than the age of the radioactive tracer used for its evaluation. This result is generalized here to radio-ages computed from the ratio of two radioactive tracers. The differences between the different ages are also studied analytically and numerically as functions of the decay rate of the radioactive tracers.For small decay rates, the difference between the age of the water mass and the radio-age is shown to be proportional to the decay rate. It depends also on the level of mixing in the system; even radioactive tracers with small decay rates can provide poor estimates of the age of the water mass in a strongly diffusive flow. For small half lives, both the radio-age and the age of radioactive tracers decrease as the inverse of the square root of the decay rate.The same analysis applies to some extent to the estimates of the age of a water mass from stable tracers with known time dependent sources (e.g. chloroflurocarbons).     

An experimental testbed for mobile offshore base control concepts

 The concept of a mobile offshore base (MOB) reflects the need to stage and support military and humanitarian operations anywhere in the world. A MOB is a self-propelled, modular, floating platform that can be assembled into lengths of up to 2 km, as required, to provide logistic support to US military operations where fixed bases are not available or adequate. It accommodates the take-off and landing of C17 aircraft, and can be used for storage, as well as to send resources quickly to shore. In most concepts, the structure is made of three to five modules, which have to perform long-term station-keeping in the presence of winds, waves, and currents. This is usually referred to as dynamic positioning (DP). In the MOB, the alignment is maintained through the use of thrusters, connectors, or a combination of both. In this paper, we consider the real-time control of scaled models of a MOB. The modules are built at the 1 : 150 scale, and are kept aligned by rotating thrusters under a hierarchical hybrid control scheme. This paper describes a physical testbed developed at the University of California, Berkeley, under a grant from the US Office of Naval Research, for the purpose of evaluating competing MOB control concepts. Received: June 4, 2002 / Accepted: October 30, 2002 Acknowledgments. This material is based on work supported by the MOB Program of the US Office of Naval Research under grant N00014-98-1-0744. The authors would like to thank the Link Foundation for its support. Many thanks go to Stephen Spry for his experimental work. The photographs are courtesy of Bill Stone, Gerald Stone, and Jay Sullivan of the PATH Publications staff. Address correspondence to: A.R. Girard (e-mail: anouck@eecs.berkeley.edu)     

中高速船加装减纵向运动组合附体实船试验

对一加装了减纵向运动组合附体的高速艇和原型艇进行了海上对比试验，并对试验结果进行了分析。试验时两艇并行前进，以便从现象上直接观察加装减纵向运动组合附体的效果。试验结果证实，组合附体减纵向运动效果显著，艏部加速度降幅可达到68%，纵摇角降幅可达到40％，加装组合附体的艇在较高海情中顶浪时可高速航行，且速度越高运动越平稳，在波浪中基本没有失速。     

Steel product flows: works-to-port: an application of the 'transportation problem'

The pattern of landward flows of steel products between manufacturing works and ports in the United Kingdom used for export is examined, and the spatial implications of various levels of hypothetical rationalization in the distribution of port facilities discussed. While extreme spatial concentration of port facilities for handling general steels would seem both impracticable and undesirable, the analysis suggests that a greater degree of rationalization than at present could be achieved without increasing overall landward transport costs.     

Analysis of wheel speed vibrations for road friction classification

ABSTRACT

With higher level of vehicle automation, it becomes increasingly important to know the maximum possible tyre forces during normal driving. An interesting method in this respect is estimating the tyre–road friction from the resonance peak in the wheel speed signal, excited by road roughness. A simulation environment using the MF-Swift tyre model is proposed, which gives insight in the correctness and functioning of this method. From implementing the estimation algorithm and considering the tyre torsional vibration system, it is concluded that frequencies and damping ratios can be estimated with reasonable accuracy and that the trends observed with changing road friction are consistent. Furthermore, the proposed simulation environment gives opportunity to investigate other issues like robustness of the estimation method to road roughness. Additionally, the tyre modelling aspect of the estimation method is analysed and improvements are proposed.     

Optimal tyre usage for a Formula One car

Variations in track temperature, surface conditions and layout have led tyre manufacturers to produce a range of rubber compounds for race events. Each compound has unique friction and durability characteristics. Efficient tyre management over a full race distance is a crucial component of a competitive race strategy. A minimum lap time optimal control calculation and a thermodynamic tyre wear model are used to establish optimal tyre warming and tyre usage strategies. Lap time sensitivities demonstrate that relatively small changes in control strategy can lead to significant reductions in the associated wear metrics. The illustrated methodology shows how vehicle setup parameters can be optimised for minimum tyre usage.     

Knock in dual-fuel diesel combustion with an E85 ethanol/gasoline blend by multi-dimensional simulation

In this paper, knocking combustion in dual-fuel diesel engine is modeled and investigated using the CFD code coupled with detailed chemical kinetics. The ethanol/gasoline blend E85 is used as the primary fuel in a dual-fuel combustion concept based on a light-duty diesel engine equipped with a common-rail injection system. The E85 blend is injected and well mixed with intake air in the intake manifold and is ignited by the direct injection diesel fuel. A 46-species, 187-reaction Multicomponent mechanism is adopted to model the auto-ignition process of the E85/air/diesel mixture ahead of the flame front. Based on the model validation, knocking combustion under boost and full load operating condition for 0 %, 20 %, 50 %, as well as 70 % E85 substitute energy is simulated. The effects of E85 substitute rate and two stage injection strategies on knock intensity, power output, as well as location of the auto-ignition initiation is clearly reproduced by the model. The calculation result shows that, for a high E85 rate of 50 % and 70 % with single injection strategies, the most serious knock and the origin of auto-ignition always occurs far away from where the flame of diesel spray is first generated, at the center of combustion chamber, due to higher pressure wave, relatively richer E85 mixture and longer distances of flame propagation. The two stage injection strategies with a small amount of diesel pilot injection ahead of the main injection primarily influence the ignition behavior of the directly injected fuel, leads to a lower pressure rise rate and a reduced propagation distance, both of which contribute to the attenuation of knock intensity for a higher E85 rate.     

Non-natural equilibrium contour design for radial tire and its influence on tire performance

Two types of radial tire 11.00R20 and 385/65R22.5 are chosen as the research objects, and their carcass contours are redesigned by using Sakai Hideo’s, Frank’s and the new non-natural equilibrium contour design theories, which were based on analyzing the current non-equilibrium contour design theories of radial tire. Then the tire wear, rolling resistance and grip performance of the two radial tires designed by different non-natural equilibrium contour design theories are comprehensively analyzed with the finite element software ABAQUS. The results show that Frank’s contour design theory can reduce tire wear; the new non-natural equilibrium contour design theory can enhance tire wear, rolling resistance performance, etc. It is also found that the tire carcass contour has great influence on tire performance, especially on the tire rolling resistance. The new non-natural equilibrium contour theory provides a guidance to reduce the tire rolling resistance, and it can break through the target conflicts in tire performance. The tire with the new non-natural equilibrium carcass contour can enhance its comprehensive performance.     

Performance evaluation of slim low-risk-deployment dual-type passenger airbag system with dispersed inflation pressure

Motor vehicle passenger airbags have been proven to be effective for reducing the possibility of passenger injury during a crash. However, the inflation of the airbag sometimes causes serious injury when a passenger is positioned close to the airbag. The United States Federal Motor Vehicle Safety Standard (FMVSS) 208 requires the use of a low-riskdeployment (LRD) passenger airbag system. This paper proposes a newly developed airbag system comprising two slim airbags mounted on the instrument panel. A series of tests were conducted using the FMVSS 208 test procedures to demonstrate the effectiveness of the proposed system. It was found that the system not only satisfied the injury criteria of FMVSS 208, but was also effective for protecting passengers of all sizes.