Hydrographic conditions affecting two fishing grounds of Mallorca island (Western Mediterranean): during the IDEA Project (2003–2004)

This paper describes the hydrographic conditions observed during six surveys carried out during 2003 and 2004, in the framework of the “IDEA Project” (acronym for “Influence of oceanographic structure and dynamics on demersal populations in waters of the Balearic Islands”). The surveys were developed on the shelf and slope of Mallorca Island, in particular in two fishing grounds at the north and south of the Mallorca channel. Periodic movements of the fishing fleet between these two areas have been regularly reported, suggesting a seasonal variability of the resources which could be in turn associated with the hydrodynamic variability. With this motivation, water masses affecting these grounds have been identified and their seasonal variability has been studied. Different oceanographic and environmental conditions have been found between the two fishing grounds. These differences are related to the presence of mesoscale structures, associated with the Western Mediterranean Intermediate Water (WIW) at the north of the Ibiza channel and big gyres detached from the Algerian Current. The former has been shown to have influence on the regional oceanic circulation and the latter could affect the progress of fresh Atlantic Water (AW) towards the channels and make possible the presence of high salinity values at intermediate waters at the south of Mallorca Island. Historical data from other oceanographic cruises carried out in the region are finally used to discuss the interannual variability of these mesoscale structures.     

Spatial variability of the barotropic M2 constituent tidal current over the Rías Baixas Galician shelf (NW Spain)

Using current meters and systematically repeated vessel mounted ADCP data legs, we describe the role of the semidiurnal and diurnal constituents in the tidal currents and investigate the mesoscale variability of the M₂ tidal currents field along three cross-shelf legs over the Galician shelf. We found that the estimated values of the semi-major axes of the main semidiurnal tidal constituents are closely related to those obtained in previous research and that the tidal currents are predominantly semidiurnal. Amplitudes of the M₂ and S₂ semi-major axes constituents are comparable, and important fortnightly variability should thus be expected in the amplitude of the semidiurnal tidal currents. Vertical profiles of the semi-major axes of the main tidal constituents reveal that, in the absence of stratification, and far from the bottom frictional effects, the tidal currents are mostly barotropic. Over the slope, the tidal ellipses tilt from a north–south orientation toward the northeast–southwest direction and, as we go further into the shelf, their amplitude is increased, a feature that is reasonably explained by the transition from the dynamics of a Poincaré wave offshore to the dynamics of a northward alongshore propagating Kelvin wave over the shelf. The Ría de Vigo exerts a notable influence over the tidal currents, acting as an extension of the shelf and introducing a meridional variation in the orientation of the ellipses from the alongshore direction in the southern straight coast toward the northeast–southwest direction at the latitude of the Rías. Finally, the spatial fitting methods we tried have proved to be successful in VMADCP data detiding in this region.     

Empirical approaches to combining revealed and stated preference data: Some recent developments with reference to urban mode choice

This paper replaces the nested logit ‘trick’ used in estimation of a modal choice model, when stated preference (SP) and revealed preference (RP) data are pooled, with an error component mixed logit model that can (i) relax the IID condition attached to subsets of alternatives in nested logit models, (ii) accommodate correlated observations, and (iii) reveal the relevant scale parameter for subsets of alternatives. Such a model can also incorporate state dependence between data types and preference heterogeneity on observed attributes. An example of choice among bus, train and car modes illustrates the difference in empirical evidence, especially elasticity outputs.     

Method for obtaining the wheel–rail contact location and its application to the normal problem calculation through ‘CONTACT’

This work presents a robust methodology for calculating inter-penetration areas between railway wheel and rail surfaces, the profiles of which are defined by a series of points. The method allows general three-dimensional displacements of the wheelset to be considered, and its characteristics make it especially suitable for dynamic simulations where the wheel–rail contact is assumed to be flexible. The technique is based on the discretisation of the geometries of the surfaces in contact, considering the wheel as a set of truncated cones and the rail as points. By means of this approach, it is possible to reduce the problem to the calculation of the intersections between cones and lines, the solution for which has a closed-form expression. The method has been used in conjunction with the CONTACT algorithm in order to solve the static normal contact problem when the lateral displacement of the wheelset, its yaw angle and the vertical force applied in the wheelset centroid are prescribed. The results consist of smooth functions when the dependent coordinates are represented as a function of the independent ones, lacking the jump discontinuities that are present when a rigid contact model is adopted. Example results are shown and assessed for the normal contact problem for different lateral and yaw positions of the wheelset on the track.     

Experimental investigation using CFD for thermal performance of ventilated disc brake rotor

In the present work, different ventilated disc brake rotor configurations were analysed to enhance the heat transfer rate and obtain the uniform temperature distribution in the rotor. CFD code used in this work was validated at using experimental results obtained by conducting experiments on a test rig. The experimental analysis was performed to calculate the mass flow rate and heat dissipation through the rotor. Further, different types of rotor configurations viz. straight radial vane (SRV), tapered radial vane (TRV), alternate long and short vane (ALSV), variable diameter circular pillars (VDCP) were considered for the analysis. A rotor segment of 20° was considered for the numerical analysis due to its rotational symmetry. CFD results were in good agreement with the experiments. The maximum deviation of the numerical results were about 12 % from the experimental results. It is found from the analysis that among the different types of rotor configurations; variable diameter circular pillars (VDCP) rotor gives better rate of heat dissipation with more uniform temperature distribution in the flow passages. Hence for modern high speed vehicles VDCP rotor may be more appropriate.     

Prospects for plug-in hybrid electric vehicles in the United States and Japan: A general equilibrium analysis

The plug-in hybrid electric vehicle (PHEV) may offer a potential near term, low-carbon alternative to today’s gasoline- and diesel-powered vehicles. A representative vehicle technology that runs on electricity in addition to conventional fuels was introduced into the MIT Emissions Prediction and Policy Analysis (EPPA) model as a perfect substitute for internal combustion engine (ICE-only) vehicles in two likely early-adopting markets, the United States and Japan. We investigate the effect of relative vehicle cost and all-electric range on the timing of PHEV market entry in the presence and absence of an advanced cellulosic biofuels technology and a strong (450 ppm) economy-wide carbon constraint. Vehicle cost could be a significant barrier to PHEV entry unless fairly aggressive goals for reducing battery costs are met. If a low-cost PHEV is available we find that its adoption has the potential to reduce CO₂ emissions, refined oil demand, and under a carbon policy the required CO₂ price in both the United States and Japan. The emissions reduction potential of PHEV adoption depends on the carbon intensity of electric power generation. Thus, the technology is much more effective in reducing CO₂ emissions if adoption occurs under an economy-wide cap and trade system that also encourages low-carbon electricity generation.     

Perturbation/correlation based optimal internal combustion engine tuning

This paper addresses the application of the perturbation/correlation method to optimizing the torque output of internal combustion engines. This application was inspired by observations of the limitations in current techniques of the automotive performance tuning industry. Performance issues such as errors from true optimum spark timing and fuel injector pulse width values as well as convergence were considered for optimal tuning. The ability of the system to deal with engine cycle-to-cycle variations and their effect on input parameters is also analyzed.     

Host specificity in copepod parasites of deep-sea fishes

Parasitic copepods belonging to two orders, Siphonostomatoida and Poecilostomatoida, are frequently reported from fish hosts in the deep sea. Three families of copepods are most commonly encountered, Sphyriidae, Lernaeopodidae and Chondracanthidae, but members of another four families, Hatschekiidae, Pennellidae, Philichthyidae and Hyponeoidae, are occasionally recorded. These parasites utilise various deep demersal fishes as hosts, especially species of the most abundant families, Macrouridae, Moridae, Synaphobranchidae and Alepocephalidae. Host specificity levels are variable, as for shallow-water fishes. In contrast, few parasites are regularly reported from fishes inhabiting the pelagic water column away from the bottom and away from the near-surface zone. Only the pennellids Sarcotretes scopeli and Cardiodectes medusaeus appear common on pelagic fishes, in the Atlantic and Pacific respectively. Host specificity levels in these two pennellid species are relatively low. It is speculated that the difficulty of encountering a host in the vast pelagic biome has restricted the diversity of parasitic copepods that have successfully colonized pelagic fishes.     

Parameter transfer of common-metric attributes in choice analysis: implications for willingness to pay

There is a growing literature that promotes the presence of a mix of compensatory and semi-compensatory processing strategies in the way that individuals evaluate packages of attributes in real or hypothetical markets, and make choices. This paper proposes a specification for the utility form in a choice model to test if, given a pair of attributes with a common-metric (e.g., components of travel time or cost), the attribute with the dominating level defines the marginal (dis)utility that is assigned to both attributes. We refer to this processing strategy as a parameter transfer rule. We use a stated choice data set, in the context of car driving individuals choosing between tolled and non-tolled routes, to estimate a mixed logit model which incorporates the presence of the parameter transfer rule and the conventional fully compensatory rule, both existing up to a probability. We find that if this parameter transfer heuristic is part of the mix, the WTP is more than 30% higher, on average, than when only a fully compensatory rule is imposed. We also contrast the parameter transfer rule with other semi-compensatory heuristics which have been investigated in other papers, and show that the finding adds further support to the accumulating evidence that a semi-compensatory attribute processing rules tend to result in higher mean WTP estimates compared to the fully compensatory attribute processing rule.     

Tests on ultimate strength of hull box girders made of high tensile steel

The experimental results of the collapse of three box girders subjected to pure bending moment are presented. The structures are made of high tensile steel of 690 MPa of nominal yield stress reinforced with bar stiffeners of the same material. The moment curvature curves are presented covering the pre- and post-collapse regions. The modes of collapse for each box girder are discussed considering the variation on the panel's slenderness. The concept of efficiency of high tensile steel structures is introduced. The concept is very useful to identify the governing parameters affecting the ultimate strength of 3D structures under predominant bending moment.