A new hybrid reliability index definition and its application to the structure buckling reliability analysis of supercavitating projectiles

As structure buckling problems easily arise when supercavitating projectiles operate with high underwater velocity, it is necessary to perform structure buckling reliability analysis. Now it is widely known that probabilistic and non-probabilistic uncertain information exists in engineering analysis. Based on reliability comprehensive index of multi-ellipsoid convex set, probabilistic uncertain information is added and transferred into non-probabilistic interval variable. The hybrid reliability is calculated by a combined method of modified limit step length iteration algorithm(MLSLIA) and Monte-Carlo method. The results of engineering examples show that the convergence of MLSLIA is better than that of limit step length iteration algorithm(LSLIA). Structure buckling hybrid reliability increases with the increase of ratio of base diameter to cavitator diameter, and decreases with the increase of initial launch velocity. Also the changes of uncertain degree of projectile velocity and cavitator drag coefficient affect structure buckling hybrid reliability index obviously. Therefore, uncertain degree of projectile velocity and cavitator drag coefficient should be controlled in project for high structure buckling reliability.     

Electro-hydraulic braking system for autonomous vehicles

Reducing the number of traffic accidents is a declared target of most governments. Since dependence on driver reaction is the main cause of road accidents, it would be advisable to replace the human factor in some driving-related tasks with automated solutions. To automate a vehicle, it is necessary to control the actuators of a car, i.e., the steering wheel, accelerator, and brake. This paper presents the design and implementation of an electro-hydraulic braking system consisting of a pump and various valves, allowing the control computer to stop the car. It is assembled in conjunction with the original circuit for the sake of robustness and to permit the two systems to halt the car independently. This system was developed for installation in a commercial Citroën C3 Pluriel of the AUTOPIA program. Various tests were carried out to verify its correct operation, and an experiment showing the integration of the system into the longitudinal control of the car is described.     

Parallel-pipelined architecture of H.264 deblocking filter with adaptive dynamic power

In H.264,the computational complexity and memory access of deblocking filter are variable and depend on the video contents. In this paper,a pipelined VLSI architecture of deblocking filter with adaptive dynamic power is proposed. It avoids redundant computations and memory access by precluding the blocks which can be skipped. And the vertical and horizontal edges are simultaneously processed in an advanced scan order to speed up the decoder. As a result,the dynamic power of the proposed architecture can be ...     

Static softening characteristics and static recrystallization kinetics of aluminum alloy A6082 after hot deformation

The static softening behavior of aluminum alloy A6082 was investigated by interrupted hot tests conducted on Gleeble-1500 simulator at deformation temperatures from 573 to 773 K and strain rates from 0.1 to 10 s⁻¹, with a pre-strain from 0.3 to 0.7 and variable inter-pass delay times. The offset method was applied to convert the changes in flow stress between two passes to static softening fraction. The microstructural changes were characterized by the quantitative metallography of quenched specimens. The results showed both static softening and static recrystallization curves exhibited a simple sigmoidal shape; the static softening is related to the static recrystallization in a nonlinear manner with 50% static recrystallized volume fraction corresponding to 80% static softening fraction; an increase in temperature, strain rate or pre-strain yields a decrease in the time for 50% static recrysallized volume fraction, on which the temperature has the most remarkable influence; Si and Mn additions accelerate the process of static recrystallization. Finally, the equations of static recrystallization kinetics of this alloy were developed with a good agreement between the predicted and experimental results.     

Research of interaction force coefficients based on model test in loading condition

It is very difficult,for the component-type ship mathematical model,to estimate the interaction force coefficients among the hull,propeller and rudder. Some coefficients such as wake fraction and flow straightening coefficient were studied from the model tests in diffierent loading conditions and the normal force of rudder was tested in captive model tests to obtain the coefficients. From these results of the tests,the flow straightening coefficients increase with the increase of trims or drafts. Similarly,...     

Real-time life-cycle modular design method based on game theory for jack-up

AbstractTo study an entity the entire jack-up performs as a total system with close interdependency and high level of integration of a myriad of subsystems supporting each individual function.All subsystems should be arranged in regular geometric space with clear regional division according to their respective functions.The "building block"such as arrangement makes it feasible to apply modular design method while the integration and conflicts among subsystems offer an arena for game theoretic analysis.All the contradictions between subsystems should be resolved bye the designer.Here we present a game theoretic analysis methodology,which based on the basic principles of game theory,through the establishment of matrix-mode game models to describe and analyze engineering design tasks.By using this method the optimization process in various fields of expertise can be effectively coordinated and controlled,and the parallel design patterns can be achieved to some extent.Taking account of the impact of commercial or technical activities in platform’s life cycle,time line is considered in the early stage of design process which provides more convenience for effcient upgrade and reconfiguration.Some second-hand three-legged jack-up upgrade design process is used as an example to illustrate the utility of the method.     

Identification of grinding wheel wear signature by a wavelet packet decomposition method

Grinding is known as the most complicated material removal process and the method for monitoring the grinding wheel wear has its own characteristics comparing with the approaches for detecting the wear on regular cutting tools. Research efforts were made to develop the wheel wear monitoring system due to its significance in grinding process. This paper presents a novel method for identification of grinding wheel wear signature by combination of wavelet packet decomposition (WPD) based energies. The distinctive feature of the method is that it takes advantage of the combinational information of the decomposed frequency components based on the WPD so the extracted features can be customized according to the specific monitored object to get better diagnosis effects. Experiments are researched on monitoring of grinding wheel wear states under different machining conditions. The results show that the energy ratio extracted from the measured vibration signals is consistent with the grinding wheel wear condition evaluated by experiment and the further extracted feature ratio can be used in prediction of wheel wear condition.     

Subjective well-being related to satisfaction with daily travel

Previous research demonstrates an impact on subjective well-being (SWB) of affect associated with routine performance of out-of-home activities. A primary aim of the present study is to investigate whether satisfaction with daily travel has a positive impact on SWB, either directly or indirectly through facilitating the performance of out-of-home activities. A secondary aim is to determine whether emotional-symbolic or instrumental reasons for car use results in higher satisfaction with daily travel than other travel modes. A survey of a population-based sample of 1,330 Swedish citizens included measures of car access and use, satisfaction with daily travel, satisfaction with performance of out-of-home routine activities, and affective and cognitive SWB. The results confirmed that the effect on affective and cognitive SWB of satisfaction with daily travel is both direct and indirect via satisfaction with performance of activities. Percent weekly car use had a small effect on satisfaction with daily travel and on affective SWB, although fully mediating the effect of satisfaction with performance of the activities. This suggests that car use plays a minor role for satisfaction with daily travel and its effect on SWB. This role may be larger if investigated after a forced reduced car use.     

Modelling the dynamics of bus use in a changing travel environment using panel data

Panel data offers the potential to represent the influence on travel choices of changing circumstances, past history and persistent individual differences (unobserved heterogeneity). A four-wave panel survey collected data on the travel choices of residents before and after the introduction of a new bus rapid transit service. The data shows gradual changes to bus use over the four waves, implying time was required for residents to become aware of the new service and to adapt to it. Ordered response models are estimated for bus use over the survey period. The results show that the influence of level of service (LOS) is underestimated if unobserved heterogeneity is not taken into account. The delayed response to the new service is able to be well represented by including LOS as a lagged variable. Current bus use is found to be conditioned on past bus use, but with additional influence of lagged LOS and unobserved heterogeneity. It is shown how different model specifications generate different evolution patterns with the most realistic predictions arising from a model which takes into account lagged responses to change in LOS and unobserved heterogeneity. The paper demonstrates the feasibility of developing panel data models that can be applied to forecasting the effect of interventions in the travel environment. Longer panels—encompassing periods of both stability and change—are required to support future efforts at modelling travel choice dynamics.     

The validity of using activity type to structure tour-based scheduling models

A unique set of activity scheduling data is utilized in this paper to provide much needed empirical analysis of the sequence in which activities are planned in everyday life. This is used to assess the validity of the assumption that activities are planned in accordance to a fixed hierarchy of activity types: mandatory activities first (work/school), followed by joint maintenance, joint discretionary, allocated maintenance, and individual discretionary activities. Such an assumption is typical of current generation activity and tour-based travel demand models. However, the empirical results clearly do not support such assumptions. For instance, fewer than 50% of mandatory activities were actually planned first in related out-of-home tours; remaining activity types also did not take any particular precedence in the planning sequence. Given this, a search was made for the more salient attributes of activities (beyond activity type) that would better predict how they are planned within tours. Several ordered response choice models for different tour sizes were developed for this purpose, predicting the choice order of the 1st, 2nd, 3rd, etc. planned activity in the tour as a function of activity type, activity characteristics (duration, frequency, travel time, and involved persons), and individual characteristics. Activity duration played the most significant role in the models compared to any other single variable, wherein longer duration activities tended to be planned much earlier in tours. This strongly suggests that the amount of time-use, rather than the nature of the event as indicated by activity type, is a primary driver of within-tour planning order and offers potential for a much improved and valid fit.