Changing ownership structures in the Dutch fleet

The new Dutch shipping policy has given rise to high expectation and curiosity in the world of shipping. This, together with the obvious difficulties of an ex-post study of the effectiveness of such innovative policy, has prompted the authors to take an interest in attempting to investigate changes in ownership of the Dutch fleet 2 years after the new policy has been introduced. To do this, a rather new concept of ‘flagging out’ has been adopted, which is interpreted as a process leading to different degrees of ‘foreignness’ in a shipping operation. In this paper, a method to structure is presented, and ownership information, and changes in it are presented, that are essentially based on the theory of stochastic processes. The data used is the Dutch fleet data, which includes information on the nationality of the flag, parent ownership and management over the period 1994–1998. The results yield interesting insights in the shifts in the ownership and operational structure of shipping companies induced by the new policy. In particular, they allow one to establish the origin of new vessels, in which stage of ownership/operation it is most likely that shifts occur, and to determine the relationship between the different stages of the ‘flagging out’ process. These results, thus, enable an evaluation of the areas in which the policy can be expected to yield results.     

小,从何谈起?

说起汽车大家会滔滔不绝地说到很多很多经典车,但这125年来的汽车发展已经改变了人们原有的思维模式。而我们这期讲的都是以小为题的内容,但这个小可以是质量的小,也可以是观点的小,这也就是我从9月份的法兰克福车展说起的原因,这是一个揭示未来汽车发展趋势的展览,也是和国内车展本质上的区别,因为国内的车展更像一个展销会。而针对法兰克福车展我个人认为带来了两个方面的信息,第一就是汽车的小排放,第二就是汽车的小众化。     

高速磁悬浮列车测速定位系统过接缝问题研究

高速磁浮列车长定子轨道的接缝会使测速定位系统相对位置传感器的检测信号产生畸变,并导致牵引设备过流或过压保护甚至烧毁.为消除轨道接缝的影响,测速定位系统使用了两路相对位置传感器.本文依据自适应滤波器原理,设计了一种自适应预测滤波器,根据相对位置传感器输出的历史值对当前输出值进行预测,通过比较预测值与实际观测值判断检测信号是否产生畸变,并以此为基础对两路传感器的信号进行选择与切换.经过仿真验证,这种方法在传感器存在安装误差和干扰的情况下也可以很好的消除因信号畸变带来的不良影响.     

Off-set crack propagation analysis under mixed mode loadings

An assessment was carried out herein to study the eccentricity of cracks subjected to mixed-mode loadings. Several loading locations relative to a central line were selected to induce mixed-mode loadings, which were computed using a finite element method. An adaptive meshing technique was adopted during the simulation of crack propagation to ensure the singularity of stress at the tip of the crack. The stress intensity failure criterion was used and programmed, and the node splitting technique was used when the stress intensity factor reached the fracture toughness of the material to simulate crack propagations. It was found that large variations in the stress intensity factor were observed when off-set cracks were used, and that K _II decreased when loading distance increased, but increased when the off-set crack distance was increased. Both crack eccentricity and loading distance played important roles in producing mixed-mode loading, compared to the influence of central cracks. Correction factors were introduced to modify the calculation of stress intensity factors under mixed-mode loadings. Simulations of crack propagation were also conducted to study the effects of crack eccentricities and loading distances. It was found that the crack length, the loading distance relative to the central crack and the crack eccentricity dominated calculations of the integrity of cracked structures.     

Development of a low-noise cooling fan for an alternator using numerical and doe methods

An alternator, which converts mechanical rotational energy into electrical energy, is an important component of a vehicle. Alternators operate over a broad range of rotational speeds, typically from 3,000 RPM to 18,000 RPM, which demands a cooling fan producing sufficient airflow, ideally with a minimum of noise. In the current study, an optimized alternator-cooling fan was developed through a linked DOE(Design OF Experiment) process and numerical analysis. The SC/Tetra and FlowNoise S/W programs were used to calculate flow rates and noise levels, respectively, for the newly developed fan. Compared with original model, the numerical results predicted a 3 dBA noise reduction; the measured reduction was 4 dBA.     

Model-based design of a variable nozzle turbocharger controller

Variable Nozzle Turbocharger (VNT) was invented to solve the problem of matching an ordinary turbocharger with an engine. VNT can harness exhaust energy more efficiently, enhance intake airflow response and reduce engine emissions, especially during transient operating conditions. The difficulty of VNT control lies in how to regulate the position of the nozzle at different engine working conditions. The control strategy designed in this study is a combination of a closed-loop feedback controller and an open-loop feed-forward controller. The gain-scheduled proportional-integral-derivative (PID) controller was implemented as the feedback controller to overcome the nonlinear characteristic. As it is difficult to tune the parameters of the gain-scheduled PID controller on an engine test bench, system identification was used to identify the plant model properties at different working points for a WP10 diesel engine on the test bench. The PID controller parameters were calculated based on the identified first-order-plus-dead-time (FOPDT) plant model. The joint simulation of the controller and the plant model was performed in Matlab/Simulink. The time-domain and frequency-domain performances of the entire system were evaluated. The designed VNT control system was verified with engine tests. The results indicated that the real boosting pressure traced the target boosting pressure well at different working conditions.     

Development of a navigation algorithm with dead reckoning for unmanned ground vehicles

A navigation algorithm is indispensable for Unmanned Ground Vehicles (UGVs). During driving, UGVs follow a global path. In this study, we propose a navigation algorithm using Real Time Kinematic (RTK)-Differential Global Positioning System (DGPS) units and encoders to complement global path planning. Sometimes GPS systems lose their signals and receive inaccurate position data due to many factors, such as edifice and barrier obstructions. This paper shows that GPS deviations can be solved using a Dead Reckoning (DR) navigation method with encoders and that position errors can be decreased through the use of RTK-DGPS units. In addition to this method, we will introduce a new waypoint update algorithm and a steering algorithm using RTK-DGPS units.     

Modified lateral control of an autonomous vehicle by look-ahead and look-down sensing

This paper presents a modified lateral control method for an autonomous vehicle with both look-ahead and look-down sensing systems. To cope with sensor noise and modeling uncertainty in the lateral control of the vehicle, a modified LMI-based H lateral controller was proposed, which uses the look-ahead information of the lateral offset error measured at the front of vehicle and the look-down information of the vehicle yaw angle error between the reference lane and the centerline of the vehicle. To verify the safety and the performance of the lateral control, a scaled-down vehicle was developed, and the positioning of the vehicle was estimated with USAT. The proposed controller, which uses both look-ahead and look-down information, was tested for lane changing and reference lane tracking with both simulation and experiment. The simulation and experimental results show that the proposed controller has better tracking and handling performance compared with a controller that uses only the look-ahead information of the target heading angle error.     

License plate extraction method for identification of vehicle violations at a railway level crossing

The primary cause of most railroad accidents is vehicle entry into railway level crossings despite warning messages. To identify drivers who violate railway level crossing regulations, vehicle license plate recognition can be applied at railway level crossings. The purpose of this paper is to present an effective method for extracting the license plate region from vehicle images taken at railway level crossings. The method proposed in this paper uses the variation in the gray-level values across the image of a license plate. For license plate region extraction, the character region is first recognized by identifying the character width and the difference between the background region and the character region. The license plate region is then extracted by finding the inter-character distance in the plate region. In addition, the license plate type is identified by the difference in the gray-level value between the background region and the character region. The proposed method is effective in solving the current challenges in extracting the license plate region from the damaged frames of license plates issued for domestic use, including new types of license plates. According to the experimental results, the proposed method yields a high extraction rate of 99.5% for vehicle license plates.