Simulation‐based estimates of delays at freeway work zones

Work zone related traffic delay is an important cost component on freeways with maintenance activities. This study demonstrates that delays may be underestimated by using the deterministic queuing theory. Computer simulation is a valuable approach of estimating delay under a variety of existing and future conditions. However, a single simulation run, which can be quite costly in terms of both computer and analyst time, produces a delay estimate for only one traffic level under one set of conditions. A method is developed in this paper to approximate delays by integrating limited simulation data, obtained from CORSIM and the concept of deterministic queuing theory, while various geometric conditions and time‐varying traffic distribution are considered. A calibrated and validated simulation model that can reflect work zone traffic operations on a segment of Interstate 1–80 in New Jersey is used to generate data for developing the proposed model. The comparison of delays estimated by the deterministic queuing model and the proposed model is conducted, while factors affecting the accuracy of the delay estimates are discussed.     

Welfare effects of congestion pricing in Singapore

This paper examines the Singapore Area License Scheme. Changes in scheduling and choices of transportation mode by commuters are discussed. Although the toll is shown to reduce travel times for many commuters, many commuters are shown to incur scheduling costs as a result of the toll. Using estimated parameters of an indirect utility function, welfare functions are computed to compare welfare levels prior to, and just after, the toll was put into place. The evidence suggests that the toll may have reduced welfare.     

The sequenced activity mobility simulator (SAMS): an integrated approach to modeling transportation, land use and air quality

The persistence of environmental problems in urban areas and the prospect of increasing congestion have precipitated a variety of new policies in the USA, with concomitant analytical and modeling requirements for transportation planning. This paper introduces the Sequenced Activity-Mobility Simulator (SAMS), a dynamic and integrated microsimulation forecasting system for transportation, land use and air quality, designed to overcome the deficiencies of conventional four-step travel demand forecasting systems. The proposed SAMS framework represents a departure from many of the conventional paradigms in travel demand forecasting. In particular, it aims at replicating the adaptative dynamics underlying transportation phenomena; explicitly incorporates the time-of-day dimension; represents human behavior based on the satisficing, as opposed to optimizing, principle; and endogenously forecasts socio-demographic, land use, vehicle fleet mix, and other variables that have traditionally been projected externally to be input into the forecasting process.     

2002款轻型卡车维修服务特别报道

21世纪的今天,轻型卡车和运动型轿车(SUV)已占据了美国汽车市场50％以上的份额。车主对这些车辆的实用性要求越来越高,汽车厂商也乐于为此加大技术投入,以满足车主越来越挑剔的需求。原因非常简单:轻型卡车和SUV能承载更多的货物,牵引船只或拖车,在泥泞、雪地和越野路面上平稳地奔驰,人们当然愿意掏腰包购买这些用途极为广泛的车型。但是,人们仍苛刻地追求豪华舒适的感受,还要求它们与同价位轿车具有相当的驾驶品质。     

Suspended sediment and erosion dynamics in Kugmallit Bay and Beaufort Sea during ice-free conditions

The Mackenzie River is the largest river on the North American side of the Arctic and its huge freshwater and sediment load impacts the Canadian Beaufort Shelf. Huge quantities of sediment and associated organic carbon are transported in the Mackenzie plume into the interior of the Arctic Ocean mainly during the freshet (May to September). Changing climate scenarios portend increased coastal erosion and resuspension that lead to altered river-shelf-slope particle budgets. We measured sedimentation rates, suspended particulate matter (SPM), particle size and settling rates during ice-free conditions in Kugmallit Bay (3–5 m depth). Additionally, measurements of erosion rate, critical shear stress, particle size distribution and resuspension threshold of bottom sediments were examined at four regionally contrasting sites (33–523 m depth) on the Canadian Beaufort Shelf using a new method for assessing sediment erosion. Wind induced resuspension was evidenced by a strong relationship between SPM and wind speed in Kugmallit Bay. Deployment of sediment traps showed decreasing sedimentation rates at sites along an inshore–offshore transect ranging from 5400 to 3700 g m^− 2 day^− 1. Particle settling rates and size distributions measured using a Perspex settling chamber showed strong relationships between equivalent spherical diameter (ESD) and particle settling rates (r² = 0.91). Mean settling rates were 0.72 cm s^− 1 with corresponding ESD values of 0.9 mm. Undisturbed sediment cores were exposed to shear stress in an attempt to compare differences in sediment stability across the shelf during September to October 2003. Shear was generated by vertically oscillating a perforated disc at controlled frequencies corresponding to calibrated shear velocity using a piston grid erosion device. Critical (Type I) erosion thresholds (u) varied between 1.1 and 1.3 cm s^− 1 with no obvious differences in location. Sediments at the deepest site Amundsen Gulf displayed the highest erosion rates (22–54 g m^− 2 min^− 1) with resuspended particle sizes ranging from 100 to 930 µm for all sites. There was no indication of biotic influence on sediment stability, although our cores did not display a fluff layer of unconsolidated sediment. Concurrent studies in the delta and shelf region suggest the importance of a nepheloid layer which transports suspended particles to the slope. Continuous cycles of resuspension, deposition, and horizontal advection may intensify with reduction of sea ice in this region. Our measurements coupled with studies of circulation and cross-shelf exchange allow parameterization and modeling of particle dynamics and carbon fluxes under various climate change scenarios.     

Metadata-based Needs Assessment for Emergency Transportation Operations with a Focus on an Aging Population: A Case Study in Florida

In the aftermath of disasters, evacuating aging victims and maintaining an optimal flow of critical resources in order to serve their needs becomes problematic, especially for Gulf Coast states in the USA such as Florida, where more than 6.9 million (36.9%) of the population are over age 50. Scanning the literature, there is no substantial prior work that has synthesized the requirements for a multi-modal emergency needs assessment that could facilitate the safe and accessible evacuation of aging people, and optimize the flow of resources into the affected region to satisfy the needs of those who remain. This paper presents a review of the aging population-focused emergency literature utilizing a knowledge base development methodology supported with a geographic information system-based case study application set in Florida. Importance is given to both ensuring the resiliency of the transportation infrastructure and meeting the needs of aging populations. As a result of this metadata-based analysis, critical research needs and challenges are presented with planning recommendations and future research directions. Results clearly indicate that transportation agencies should focus on clear and fast dissemination of disaster-related information to the aging populations. The use of paratransit services for evacuating aging people, especially those living independently and/or in rural areas, is also found to be of paramount importance.     

Development of efficient stop planning optimization process for high‐speed rail systems

The Taiwan High Speed Rail (THSR) has recently added three additional stations to its original network. Although the three additional stations can improve accessibility to the system, these new stations can present difficulties in the transportation planning process, particularly for planning of train stops. The additional stations may benefit some passengers, but may also lengthen the travel time for the other passengers. Therefore, the main challenge faced by THSR is finding an efficient way to design appropriate stopping patterns. Past studies on stop planning usually adopted meta‐heuristics or decomposition methods to solve this complex problem. Although these solution techniques can improve solution efficiency, none of them can guarantee the optimality of the solution and capture the transfer movement of different stopping patterns. In this research, we proposed an innovative network structure to address complex stop planning problems for high‐speed rail systems. Given its special network structure, two binary integer programming models were developed to simultaneously form and determine the optimal stopping patterns for real‐world THSR stop planning problems. An optimization process was also developed to accurately estimate the station transfer time corresponding to the variation in stopping patterns and passenger flow. Results of the case studies suggest that the proposed binary integer programming models exhibit superior solution quality and efficiency over existing exact optimization models. Consequently, using this stop planning optimization process can help high‐speed rail system planners in designing optimal stopping patterns that correspond to passenger demand. Copyright © 2017 John Wiley & Sons, Ltd.     

Accidents involving pedestrians with their backs to traffic or facing traffic: an evaluation of crash characteristics and injuries

This paper examines pedestrian anatomical injuries and crash characteristics in back‐to‐traffic and facing‐traffic crashes. Pedestrian crashes involving pedestrians walking along streets (i.e. with their backs to traffic or facing traffic) have been overlooked in literature. Although this is not the most frequent type of crash, the crash consequence to pedestrians is a safety concern. Combining Taiwan A1A2 police‐reported accident data and data from the National Health Insurance Database from years 2003–2013, this paper examines anatomical injuries and crash characteristics in back‐to‐traffic and facing‐traffic crashes. There were a total of 830 and 2267 pedestrian casualties in back‐to‐traffic and facing‐traffic crashes respectively. The injuries sustained by pedestrians and crash characteristics of these two crash types were compared with those of other crossing types of crashes (nearside crash, nearside dart‐out crash, offside crash, and offside dart‐out crash). Odds of various injuries to body regions were estimated using logistic regressions. Key findings include that the percentage of fatalities in back‐to‐traffic crashes is the highest; logistic models reveal that pedestrians in back‐to‐traffic crashes sustained more head, neck, and spinal injuries than did pedestrians in other crash types, and unlit darkness and non‐built‐up roadways were associated with an increased risk of pedestrian head injuries. Several crash features (e.g. unlit darkness, overtaking manoeuvres, phone use by pedestrians and drivers, and intoxicated drivers) are more frequently evident in back‐to‐traffic crashes than in other types of crashes. The current research suggests that in terms of crash consequence, facing traffic is safer than back to traffic. Copyright © 2016 John Wiley & Sons, Ltd.     

Online calibration of an integrated framework for information‐based evacuation operations

This study seeks to online calibrate the parameters of aggregate evacuee behavior models used in a behavior‐consistent information‐based control module for determining information strategies for real‐time evacuation operations. It enables the deployment of an operational framework for mass evacuation that integrates three aspects underlying an evacuation operation: demand (evacuee behavior), supply (network management), and disaster characteristics. To attain behavior‐consistency, the control module factors evacuees' likely responses to the disseminated information in determining information‐based control strategies. Hence, the ability of the behavior models to predict evacuees' likely responses is critical to the effectiveness of traffic routing by information strategies. The mixed logit structure is used for the aggregate behavior models to accommodate the behavioral heterogeneity across the population. An online calibration problem is proposed to calibrate the random parameters in the behavior models by using the least square estimator to minimize the gap between the predicted network flows and unfolding traffic dynamics. Background traffic, an important but rarely studied issue for modeling evacuation traffic, is also accounted for in the proposed problem. Numerical experiments are conducted to illustrate the importance of the calibration problem for addressing the system consistency issues and integrating the demand, supply, and disaster characteristics for more efficient evacuation operations. Copyright © 2016 John Wiley & Sons, Ltd.     

Fixed‐route taxi system: route network design and fleet size minimization problems

This paper introduces the taxi route network design problem (TXRNDP) for a fixed‐route taxi service operating in Iran and, in similar form, in various other developing countries. The service operates fairly similar to regular transit services in that vehicles are only permitted to follow a certain predetermined route on the network. The service is provided with small size vehicles and main features are that vehicles only depart if full and that there are no intermediate boarding stops. In Iran the service attracts a high modal share but requires better coordination which is the main motivation for the present study. We develop a mathematical programming model to minimize the total travel time experienced by passengers while constraining the number of taxi lines, the trip transfer ratio and the length of taxi lines. A number of assumptions are introduced in order to allow finding an exact rather than heuristic solution. We further develop a linear programming solution to minimize the number of taxis required to serve the previously found fixed‐route taxi network. Results of a case study with the city of Zanjan, Iran, illustrate the resulting taxi flows and suggest the capability of the proposed model to reduce the total travel time, the total waiting time and the number of taxi lines compared to the current taxi operation. Copyright © 2016 John Wiley & Sons, Ltd.