A tyre slip-based integrated chassis control of front/rear traction distribution and four-wheel independent brake from moderate driving to limit handling

This paper presents a tyre slip-based integrated chassis control of front/rear traction distribution and four-wheel braking for enhanced performance from moderate driving to limit handling. The proposed algorithm adopted hierarchical structure: supervisor – desired motion tracking controller – optimisation-based control allocation. In the supervisor, by considering transient cornering characteristics, desired vehicle motion is calculated. In the desired motion tracking controller, in order to track desired vehicle motion, virtual control input is determined in the manner of sliding mode control. In the control allocation, virtual control input is allocated to minimise cost function. The cost function consists of two major parts. First part is a slip-based tyre friction utilisation quantification, which does not need a tyre force estimation. Second part is an allocation guideline, which guides optimally allocated inputs to predefined solution. The proposed algorithm has been investigated via simulation from moderate driving to limit handling scenario. Compared to Base and direct yaw moment control system, the proposed algorithm can effectively reduce tyre dissipation energy in the moderate driving situation. Moreover, the proposed algorithm enhances limit handling performance compared to Base and direct yaw moment control system. In addition to comparison with Base and direct yaw moment control, comparison the proposed algorithm with the control algorithm based on the known tyre force information has been conducted. The results show that the performance of the proposed algorithm is similar with that of the control algorithm with the known tyre force information.     

Creep Life Prediction of Alloy 718 for Automotive Engine Materials

This study was carried out to investigate the creep life at the high temperature of the Alloy 718 for automotive engine components using the initial strain parameter method (ISPM). Creep tests have performed at elevated temperatures in the range of 550 oC to 700 oC in this work. We also carried out constant stress creep tests. The initial strains were measured during 1 minute after loading. Both the creep stress and rupture time depend on the initial strain. We calculated the creep life of Alloy 718 by using the creep life prediction equations obtained from the ISPM. Then, we compared the creep life predicted by the ISPM to the Larson-Miller parameter (LMP). The experimental rupture time and the calculated rupture time by using the ISPM agreed with a confidence level of 95 %. The creep life predicted by using the ISPM was in very good agreement with the creep life predicted using the LMP method.     

A game-theoretic analysis of competition among container port hubs: the case of Busan and Shanghai 1

Countries throughout the world, and especially within Asia, are investing heavily in container port infrastructure in the hopes of capturing a larger share of global shipping activity for their economies. Many existing ports are emphasizing developing the capacity to serve as a hub port, building deepwater berths with large terminals to facilitate transfer of containers from feeder ships to mother ships for intercontinental transport. We develop a game-theoretic best response framework for understanding how competitor ports will respond to development at a focus port, and whether the focus port will be able to capture or defend market share by building additional capacity. We apply this model to investment and competition currently occurring between the ports of Busan and Shanghai.     

考虑疲劳强度和减轻质量的转向架构架设计

用有限元法对各种载荷工况下的转向架构架进行了疲劳分析,利用人工神经网络和遗传算法最大程度地减轻了转向架构架的质量.     

Design framework for FlexRay network parameter optimization

Because the FlexRay protocol has more than 70 configuration parameters and these parameters correlate with each other, designing a FlexRay network is a complex and difficult task. In this study, we propose a design framework that optimizes the two main FlexRay network parameters that are highly relevant to the application algorithm. The design process is composed of two steps for optimizing parameters. In the first step, the static slot length is optimized using a frame-packing algorithm. This algorithm binds network signals into static frames based on their periods and signal groups. In the second step, the communication cycle length is optimally designed with frame-scheduling algorithm and worst-case reponse time analysis. Based on the frame-scheduling algorithm, the response times are analyzed. The proposed design framework was applied to a unified chassis control system as a case study, and the analytical results were verified.     

Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

Effect of fuel stratification on initial flame development: Part 3-high swirl condition

This paper discusses the final investigation into the effect of fuel stratification on flame propagation. In previous works, the characteristics under the no port-generated swirl condition and the low-swirl condition were considered. For this purpose, the initial flame development and propagation were visualized under different axially stratified states in a modified optical single-cylinder SI engine. The images were captured by an intensified CCD camera through the quartz window mounted in the piston. Stratification was controlled by the combination of the port swirl ratio and injection timing. These were averaged and processed to characterize the flame propagation. The flame stability was estimated by the weighted average of flame area and luminosity. The stability was also evaluated through the standard deviation of flame area and propagation distance and through the mean absolute deviation of the propagation direction. The results show that the LML is expanded remarkably under the high-swirl cases up to the highest relative AFRs of 1.71 and 1.75 between 140 and 160CA. In addition, similar to the low-swirl condition, the flame-flow interaction determines the direction of flame propagation, and the governing roles of the two factors vary according to the swirl level; the flow is more important at the higher swirl conditions, and the flame is more important at the lower swirl condition. Finally, fast and stable flame propagation can be achieved under the preferably stratified condition, which is induced by the suitable combination of the high swirl and injection timing.     

Time-variant ultimate longitudinal strength of corroded bulk carriers

Many bulk carrier losses have been reported of late, and one of the possible causes of such casualties is thought to be the structural failure of aging hulls in rough weather. In aging ships, corrosion and fatigue cracks are the two most important factors affecting structural safety and integrity. This paper uses a set of the time-dependent corrosion wastage models for 23 different member locations/categories of bulk carriers previously developed by the authors, based on the available corrosion measurements for existing large bulk carrier structures. Differences due to the location and corrosion severity of every member type are taken into account. The nominal design corrosion values for the primary members are suggested based on the annualized corrosion rates obtained in the present study. The effect of time-variant corrosion wastage on the ultimate hull girder strength as well as the section moduli is studied. The criteria for repair and maintenance of heavily corroded structural members so as to keep the ultimate longitudinal strength at an acceptable level are discussed. Important insights and conclusions developed are summarized.     

Origin–destination synthesis for aviation network data: examining hub operations in the domestic and international US markets

Hub‐and‐spoke networking is a key feature of current aviation markets in which hubs, as connecting points, function to consolidate and redistribute flows. This indicates that observation of traffic on a segment does not necessarily convey information about the origin to destination routing of passenger journeys because of the unavoidable detours in the system. This paper examines the heterogeneity of the flow composition in domestic and international US markets, which in turn allows us to observe the variation of operations across major hubs. A modified Route Flow Estimator for origin–destination synthesis (or origin–destination matrix estimation) is designed to decompose the segment traffic into itinerary‐based passenger trips. Several public and commercial databases, which are easily accessible, are exploited (and reconciled) for the model in order to (i) generate possible trip itineraries using those segment markets, and (ii) link data‐driven operational conditions with the underlying segment flows. The results are validated with US domestic trip observations and empirical knowledge related to the air transportation system. Then, the variability of the hub operations is examined based on sensitivity tests using the model parameters. From the resolution of itinerary‐based estimates, we observe that major airports' hub operations are spatially uneven, particularly with respect to domestic and international connecting passengers. Copyright © 2017 John Wiley & Sons, Ltd.     

Inverse Analysis of Pre- and Post-Impact Dynamics for Vehicle Accident Reconstruction

In the dynamic analysis of the vehicular accident reconstruction, the vehicle motion is typically analyzed in three phases. These are pre-impact motion, impact motion, and post-impact motion, which are usually analyzed in reverse order of occurrence. Tire-ground forces are important during the pre- and post-impact motions, and less important during the impact. We present a vehicular dynamic model for pre- and post-impact as a rigid body which moves under the influence of tire-ground forces. Using a forward simulation analysis, we show how the initial sliding conditions can be computed with several final data points for vehicle's position and orientation, referred to as the inverse analysis algorithm for the accident reconstruction.