Estimating the value of risk reductions for car drivers when pedestrians are involved: a case study in Spain

We estimated the benefits associated with reducing fatal and severe injuries from traffic accidents using a stated choice experiment where choice situations were generated through a statistically efficient design. Specifically, the risk variables were defined as the expected annual number of vehicle car-users that suffered their death or were severely injured in a traffic accident. In addition, and differing from previous research, the number of pedestrians that died or were severely injured in traffic accidents per year was also included as a risk attribute in the choice experiment, to attempt at measuring drivers’ willingness to pay to reduce the risk of hitting pedestrians in a crash. The empirical setting was a choice of route for a particular trip that a sample of car drivers periodically undertakes in Tenerife, Spain. Models were estimated accounting for random taste heterogeneity and pseudo-panel data correlation. The median of the distribution of simulated parameters was used to obtain a representative measure for the monetary valuation of risk reductions. We found that the ratio between the values of reducing the risk of suffering a serious injury and that of reducing a fatality was approximately 18 %. Further, and quite novel, we also found that the value of reducing a pedestrian fatality was 39 % of the value of reducing a car occupant fatality.     

The impact of muddy bottoms in ports

Ports are drivers of regional and of countries’ economic development. Most ports are built close to coastlines, where waters are shallower and tend to suffer from deposit sedimentation processes, which reduce depths in operational areas. In presence of shallow waters and sedimentation, ports must decide whether to dredge or not, where both decisions have significant impacts on ports’ annual incomes. Nevertheless, there are seabeds, namely muddy bottoms, in which vessels can navigate with a safety degree. This paper aims at investigating the extent to which the theoretical knowledge of vessel’s control in muddy waters is valid at a certain nautical bottom, as defined by the Permanent International Association of Navigation Congresses (since 2009 the World Association for Waterborne Transport Infrastructure but the acronym stays PIANC) and its impact on port economics. To achieve the proposed objective, an email survey was sent to worldwide pilots that manoeuvre ships in muddy waters. The survey validated the theoretical knowledge, showed that navigation in muddy waters is possible, that it can contribute to reduce ports’ operational costs, and that the subject can be rather controversial.     

基于互信息和贝叶斯网络的船舶碰撞风险预测研究

船舶碰撞事故对航行安全威胁严重,不仅会导致船舶、货物的损坏,还会对航道和水域环境造成污染,如果船上装载的石油、危化品等物质由于事故原因产生泄漏,更是会对临近水域及生态环境带来灾难性破坏。因此,对船舶(特别是危化品运输船舶)碰撞风险的预测和管理一直受到各界的重视。本文在全面分析船舶碰撞事故风险因素的基础上,利用互信息理论计算事故数据特征因素间互信息值,确定了各碰撞风险特征因素间的依赖关系,并最终建立了船舶碰撞险情的贝叶斯网络预测模型,以期为航运企业和航道管理单位的管理提供理论依据,从而减少船舶碰撞事故,保障我国航运业的安全、高效和绿色发展。     

On the observability of the fortnightly cycle of the Tagus estuary turbid plume using MODIS ocean colour images

Using three years (2003 to 2005) of MODIS-Aqua normalized water-leaving radiance at 551 nm this paper shows a fortnightly cycle in the Tagus estuary turbid plume. The Tagus estuary is one of the largest estuaries of the west coast of Europe and is located in the most populated area of Portugal, including the capital Lisbon. The turbid plume has been detected by the backscattering characteristics of the surface waters in the vicinity of the estuary mouth. In fortnightly scales, the turbid plume has smaller dimensions during and after neap tides and higher dimensions during and after spring tides. This is most probably associated with the fortnightly spring–neap tidal cycle and the consequent increase in turbidity inside the estuary during spring tides. During the summer weak spring tides (tidal amplitude approximately 2.5 m) no turbid plume is observed for an entire fortnightly cycle. Outside the summer months, precipitation, river discharge and winds, were found to increase the turbid area, but the fortnightly cycle appears to be superimposed on the large time-scale variability, and present throughout the year.     

柔性靠船桩簇的设计与分析计算

以金润码头为例,介绍码头平台前沿设置的柔性靠船桩簇设计形式,并对柔性靠船桩簇的靠船吸收能量进行分析计算.提出了合理的柔性靠船桩簇的结构形式及相应的计算方法.     

Discussions on rail in urban areas and rail history

This paper includes discussions on rail in urban areas and railway history. More specifically commonly used terms and definitions for rail services, policy and practice in urban areas are discussed followed by an overview of railway developments around the world.     

Cycle commuting in Belgium: Spatial determinants and ‘re-cycling’ strategies

This paper attempts to explain the spatial variation of the use of a bicycle for commuting to work at the level of the 589 municipalities in Belgium. Regression techniques were used and special attention was paid to autocorrelation, heterogeneity and multicollinearity. Spatial lag models were used to correct for the presence of spatial dependence and a disaggregated modelling strategy was adopted for the northern and southern parts of the country. The results show that much of the inter-municipality variation in bicycle use is related to environmental aspects such as the relief, traffic volumes and cycling accidents. Town size, distance travelled and demographic aspects also have some effect. In addition, there are regional differences in the effects of the structural covariates on bicycle use: the impact of variables such as traffic volume and cycling accidents differs substantially between the north and the south of the country. This paper also suggests that high rates of bicycle use in one municipality stimulate cycling in neighbouring municipalities, and hence that a mass effect can be initiated, i.e. more cycle commuting encourages even more commuters in the area to cycle. These findings provide some recommendations for decision-makers wishing to promote a shift from car to bicycle use.     

Numerical study on active wave devouring propulsion

The possibility of extracting energy from gravity waves for marine propulsion was numerically studied by a two-dimensional oscillating hydrofoil in this study. The commercially available computational fluid dynamics software FLUENT was used for the unstructured grid based on the Reynolds-average Navier?CStokes equation. The free surface waves and motion of the flapping foil were implemented by customizing the FLUENT solver using a user-defined function technique. In addition, dynamic mesh technology and post processing capabilities were fully utilized. The validation of the model was carried out using experimental data for an oscillation hydrofoil under the waves. The results of the simulation were investigated in detail in order to explain the increase of propeller efficiency in gravity waves. Eight design parameters were identified and it was found that some of them greatly affected the performance of wave energy extraction by the active oscillating hydrofoil. Finally, the overall results suggested that when the design parameters are correctly maintained, the present approach can increase the performance of the oscillating hydrofoil by absorbing energy from sea waves.     

In situ colonization of marine biofilms on UNS S32760 duplex stainless steel coupons in areas with different water qualities: Implications for corrosion potential behavior

In the presence of biofilms, stainless steels （SS） exhibits an increase in corrosion potential, called ennoblement. In the present study, the corrosion potential （Eco,） behavior of the duplex SS UNS S32760 was recorded simultaneously with the in situ marine biofilm formation in two areas at Arraial do Cabo, Southeastern Brazil. The biofilm at Forno Harbor （an anthropogenically disturbed area） was characterized by higher relative abundances of Bacteria at day 2, followed by diatoms （especially Navicula sp.） on day 10 and dinoflagellates on day 18, whereas no clear trend was recorded at Cabo Frio Island （an undisturbed area）. The ennoblement of Ecor values was site-dependent. In a complementary laboratory assay, biofilms were removed and the Eco values registered in sterile conditions for the subsequent 10 days and corroborated in situ results. Understanding biofilms and SS interactions has important implications for materials science and engineering decisions as well as helping to fill in imnortant gaps in this knowledge.