A velocity and payload dependent emission model for heavy-duty road freight transportation

The paper develops a forecasting model of emissions from traffic flows embracing the dynamics of driving behavior due to variations in payload. To measure of emissions at the level of individual vehicles under varying payloads a portable emission measurement system is used. This paper reports on a model based on data at the level of individual vehicles for a representative road trajectory. The model aggregates the data to the level of a homogeneous flow dependent of velocity and specific power, which is dependent on payload weight. We find a lean specification for the model that provides emission factors for CO₂, NO_x, HC, CO, and NO₂. The results indicate that, in comparison with earlier models, NO_x emissions in particular tend to be underestimated.     

A GPS-aided survey for assessing trip reporting accuracy and travel of students without telephone land lines

A geo-positioning satellite (GPS)-based survey, using a web-based prompted recall tool, was conducted on a sample of 94 students at the University of Toronto from November 2008 to April 2009. The sample included students with and without telephone land lines, allowing for a statistical comparison of demographic and travel behaviour attributes. The same subjects simultaneously completed a traditional trip reporting survey, modelled on the household travel survey in Toronto, allowing for a comparison between the travel behaviour information obtained from the GPS and that reported by the participants in the traditional survey. Students with a land line are more likely to live in houses, with parents, and to live in suburban areas than students without a land line. They also make fewer trips in total, fewer discretionary trips, more transit and auto trips and fewer active trips than students without a land line. By comparing questionnaire-based data and GPS data, we found that most participants reported in the questionnaire either the same number of GPS-based trips or fewer. On average, the GPS survey captured 1.29 more daily trips per participant than the corresponding trips reported in the questionnaire.     

Effect of critical incidents on public transport satisfaction and loyalty: an Ordinal Probit SEM-MIMIC approach

Transportation - Supplying public transport systems with high levels of service quality is fundamental for retaining users and attracting new ones. Policies that improve transit service quality...     

The impact of automated transit,pedestrian, and bicycling facilities on urban travel patterns

This article reports on an integrated modeling exercise, conducted on behalf of the US Federal Highway Administration, on the potential for frequent automated transit shuttles (‘community transit’), in conjunction with improvements to the walking and cycling environment, to overcome the last-mile problem of regional rail transit and thereby divert travelers away from car use. A set of interlocking investigations was undertaken, including development of urban visualizations, distribution of a home-based survey supporting a stated-preference model of mode choice, development of an agent-based model, and alignment of the mode-choice and agent-based models. The investigations were designed to produce best-case estimates of the impact of community transit and ancillary improvements in reducing car use. The models in combination suggested significant potential to divert drivers, especially in areas that were relatively transit-poor to begin with.     

On the vibrational characteristics of a two-tier scaled container stack

It is estimated that around 10,000 containers are lost during maritime transportation every year, representing an economic loss to the liner industry. Regulations and norms used to calculate values to secure them to the ship’s deck account for static loads only, neglecting more realistic conditions. This paper describes an approach to simulate a two-tier scaled model of a 20-ft ISO freight container and its linking connectors, denominated twist locks, subject to a dynamical load induced by its base. To analyze this problem two methods were employed: a shaking table test and finite-element analysis. Results of this study indicate that the numerical model built to simulate two-tier container stack dynamics is a promising tool for further studies. Moreover, the model is able to predict conditions close to real situations faced by container stacks while stored on deck.     

Autonomous vehicle control systems for safe crossroads

This article presents a cooperative manoeuvre among three dual mode cars – vehicles equipped with sensors and actuators, and that can be driven either manually or autonomously. One vehicle is driven autonomously and the other two are driven manually. The main objective is to test two decision algorithms for priority conflict resolution at intersections so that a vehicle autonomously driven can take their own decision about crossing an intersection mingling with manually driven cars without the need for infrastructure modifications. To do this, the system needs the position, speeds, and turning intentions of the rest of the cars involved in the manoeuvre. This information is acquired via communications, but other methods are also viable, such as artificial vision. The idea of the experiments was to adjust the speed of the manually driven vehicles to force a situation where all three vehicles arrive at an intersection at the same time.     

Marine Protected Area Management Effectiveness: Progress and Lessons in the Philippines

Quantifying progress in management of marine protected areas (MPAs) is crucial to marine conservation and fisheries management in the Philippines. This study compiles data on the status, occurrence, and management gaps of MPAs through coordination with multiple organizations supporting and guiding MPAs in the Philippines. MPA management effectiveness was measured using a MPA Rating System. Since 2002 the modal MPA rating levels increased from level 1 (initiated) to level 4 (sustained) in 2008/9. This upward trend is attributed to factors that promoted both the establishment and improved management of MPAs. Analysis indicated that: (1) most MPAs struggle with budgetary constraints or lack of sustainable financing and (2) overall the MPAs are being maintained and progressing with notable improvement in management despite a range of difficulties encountered during the implementation process. For MPAs in the Visayan Region for which biophysical data were available, the MPA Rating System was used to assess the effectiveness of local government capacity building on MPA coral reef health. Our results suggest that MPAs with higher ratings are likely to have better reef health conditions.     

The impact of route guidance,departure time advice and alternative routes on door-to-door travel time reliability: Two data-driven assessment methods

ABSTRACT

Conventional travel time reliability assessment has evolved from road segments to the route level. However, a connection between origin and destination usually consists of multiple routes, thereby providing the option to choose. Having alternatives can compensate for the deterioration of a single route; therefore, this study assesses the reliability and quality of the aggregate of the route set of an origin-destination (OD) pair. This paper proposes two aggregation methods for analyzing the reliability of travel times on the OD level: 1) an adapted Logsum method and 2) a route choice model. The first method analyzes reliability from a network perspective and the second method is based on the reliability as perceived by a traveler choosing his route from the available alternatives. A case study using detailed data on actual travel times illustrates both methods and shows the impact of having variable departure times and the impact of information strategies on travel time reliability.     

Monitoring trace elements (Al, As, Cr, Cu, Fe, Mn, Ni and Zn) in deep and surface waters of the estuary of the Nerbioi-Ibaizabal River (Bay of Biscay, Basque Country)

Deep water samples (in contact with the sediment) were collected at eight different points of the estuary of the Nerbioi-Ibaizabal River (Bay of Biscay, Basque Country), both at low and high tides, during four sampling campaigns (May, September and December 2005 and March 2006). Superficial water was also sampled in March 2006. Temperature, pH, redox potential, dissolved oxygen and electrical conductivity corresponding to each sample were measured in situ at each sampling point using a multiparametric probe. The physico-chemical parameters found are typical of highly stratified estuaries, with an acceptable oxygenation level. After filtering and acidifying the samples, they were analysed by inductively coupled plasma/mass spectrometry (ICP/MS) to simultaneously determine the total concentration of Al, As, Cr, Cu, Fe, Mn, Ni and Zn. Concentrations in the μg kg^− 1 level were found in all cases (c_Cr and c_Ni, 1–10; c_Al, c_As and c_Zn, 10–50; c_Cu and c_Mn, 10–100 and c_Fe, 100–400 μg kg^− 1). A probable net input of Al, Cr, Mn and Zn via the main (Nerbioi-Ibaizabal) and some of the tributary rivers (Galindo, Asua and Gobela) was identified. Evidence of a common source of Al and Zn to the estuary was found. Correlation analysis of data revealed connections between variables (concentration of Cu, Fe and As with salinity, as well as c_Al with c_Zn, c_Cu with c_Fe, c_As with c_Fe, and c_As with c_Cu). Principal Component Analysis (PCA) of data allowed the samples to be grouped according to sampling campaign, with two principal components accounting for 62% of the total variance. In addition, plots of element concentration against salinity suggested a conservative behaviour for As, Cu and Fe and a non-conservative one for Cr. Not clear mixing behaviour was observed for the rest of elements.     

Transit costs and cost efficiency: Bootstrapping non-parametric frontiers

This paper explores a selection of recently proposed bootstrapping techniques to estimate non-parametric convex (DEA) cost frontiers and efficiency scores for transit firms. Using a sample of Norwegian bus operators, the key results can be summarized as follows: (i) the bias implied by uncorrected cost efficiency measures is numerically important (close to 25%), (ii) the bootstrapped-based test rejects the constant returns to scale hypothesis, and (iii) explaining patterns of efficiency scores using a two-stage bootstrapping approach detects only one significant covariate, in contrast to earlier results highlighting, e.g., the positive impact of high-powered contract types. Finally, comparing the average inefficiency obtained for the Norwegian data set with an analogous estimate for a smaller French sample illustrates how the estimated differences in average efficiency almost disappear once sample size differences are accounted for.