光纤传感器系统在土工结构的静动应变测量上的应用

评估了光纤传感器作为完整的结构部件在恶劣的环境条件下,进行长期或短期应变监测的可行性.不同的规模和材料的土工试验过程中已经使用了光纤传感器.实例研究包括静力轴向的钻孔桩测试、钻孔测斜、试验室的单轴压缩测试.     

荷坳隧道四洞小净距段支护结构设计研究北大核心CSCD

多洞空间小净距隧道支护结构参数量化设计与安全性分析是当前设计中的一大难题。文章针对深圳机荷高速公路荷坳隧道四洞小净距段的设计,采用总安全系数法对四洞的开挖与支护模式、各洞的开挖顺序及支护参数进行了研究比较,并采用隧规荷载-结构法、增量法、地层-结构法对支护结构的安全系数进行了对比计算,得出以下结论:(1)提出了基于总安全系数法原理的多洞空间小净距隧道设计方法;(2)根据总安全系数法得出了荷坳隧道四洞小净距段应采用“先行洞二次衬砌完成后再开挖下一孔隧道”的开挖与支护模式,且应按洞1→洞2→洞3→洞4的开挖顺序施工;(3)隧规荷载-结构法、增量法、地层-结构法虽无法得出结构的总承载安全系数,但在一定程度上可以反应部分支护结构的安全性。     

Do driver training programs reduce crashes and traffic violations? — A critical examination of the literature

This paper reviews the evaluation literature on the effectiveness of classroom and behind-the-wheel driver training. The primary focus is on North America programs as originally taught in high schools but now also by private instructors. Studies from the United Kingdom, Australia, New Zealand and Scandinavia are also included.By far the most rigorous study to date was the experimental study in DeKalb, Georgia, U.S.A. This study used a randomized design including a control group and a very large sample size to provide reasonable statistical precision. I reexamine the DeKalb data in detail and conclude that the study did show evidence of small short-term crash and violation reductions per licensed driver. However, when the accelerated licensure caused by the training is allowed to influence the crash and violation counts, there is evidence of a net increase in crashes.The other studies reviewed present a mixed picture but the better designed quasi-experimental evaluations usually showed no effects on crash rates but almost all suffer from inadequate sample size. I show that as many as 35,000 drivers would be required in a two group design to reliably detect a 10% reduction in crash rates.The advent of GDL laws in North America and other countries has largely remedied the concern over accelerated licensure of high risk teenage drivers by delaying the progress to full licensure. Conventional driver training programs in the U.S. (30 h classroom and 6 h on-the-road) probably reduce per licensed driver crash rates by as little as 5% over the first 6-12 months of driving. The possibility of an effect closer to 0 cannot be dismissed.Some GDLs contain an incentive for applicants to complete an advanced driver training program in return for shortening the provisional period of the GDL. The results of Canadian studies indicate that any effects of the driver training component are not sufficient to offset the increase in accidents due to increased exposure.There is no evidence or reason to believe that merely lengthening the number of hours on the road will increase effectiveness. Programs directed toward attitude change and risk taking better address the underlying cause of the elevated crash risk of young drivers but these behaviors are notoriously resistant to modification in young people.     

Le transport ferroviaire régional de voyageurs : un processus collectif d’apprentissage

Regional passenger rail services are prevalent in France, as opposed to the more marginal role they play elsewhere in the world. It is indeed at the regional level that reforms have been successfully implemented, probably because the process was gradual and cautious. Initially in 1997, seven regions began experimenting with a decentralized system of regional passenger transportation services. By 2002, all metropolitan regions, with the exception of Corsica and Ile-de-France, were involved. Today we have reached a point where this process can be retrospectively and prospectively assessed. This article is first a retrospective assessment of the role of actors and the emerging dynamic between regional passenger rail transport supply and demand. Then, a prospective evaluation is offered since regionalization is best understood as an ongoing learning process that can be discontinuous or continuous.     

刺桐基督教与摩尼教遗迹概述

刺桐(泉州)是中世纪各大宗教之家,有着丰富的宗教遗存,其中以石刻为多,引起中外学者的浓厚兴趣。澳大利亚研究团多次造访泉州,对泉州的宗教石刻(主要是基督教石刻)进行详尽的考证。研究团成员刘南强教授首先对泉州宗教石刻存在的历史背景和收藏保护情况做了简要概述,重点介绍访问的成果主要是碑文的解读与译释情况。     

Fault detection method for electric parking brake (EPB) systems with sensorless estimation using current ripples

A fault detection method with parity equations is proposed in this paper. Due to its low cost implementation, the velocity of the motor is not measurable in electric parking brake (EPB) systems. Therefore, residuals are not reliable when estimating the motor velocity with a low-resolution encoder. In this paper, we propose a fault detection method with sensorless estimation using current ripples that estimates the position and velocity of the motor by detecting periodical oscillations of the armature current caused by rotor slots. In addition, this method can estimate the position and velocity of the motor with less computational effort than a state observer. Moreover, the method is less sensitive to motor parameters than model-based estimation methods. The effectiveness of this method is validated with experimental data, and the simulation results show that various faults have their own residual patterns. Therefore, we can detect the presence of faults by monitoring the residual signals.     

Approximations to the magic formula

Pacejka’s tire model is widely used and well-known by the automotive engineering community. The magic formula describes the brake force, side force and self-aligning torque in terms of the longitudinal slip and slip angle, plus several corrections. This paper uses approximation theory to obtain different types of approximations to the magic formula: rational functions (RA) resulting from the Remez algorithm, expansions in a series of Chebyshev polynomials (ACh), a series of Chebyshev rational polynomials (ARChPs), a series of rational orthogonal functions (ORF) and a series of ARChPs that result from grade-1 ORFs. The last expansion shows the fastest convergence and most effective computation. Jacobi rational polynomials can also be obtained to complement this expansion and facilitate fine-tuning in specific areas of the error curve. This work is complemented by obtaining the original rational approximations to the inverse tangent function, which take advantage of the curve symmetry to reduce the computation load and provide models that include the influence of the vertical load. The convergence properties of the development in series and the error values resulting from numeric examples for the three types of stress are shown. The proposed final ARChP expressions show very low error (1%) compared to the original magic formula. They can be computed 20 times faster; they can be evaluated, derived and integrated analytically easily; and their coefficients can be obtained from tests using common least-squares algorithms.     

Robust lane markings detection and road geometry computation

Detection of lane markings based on a camera sensor can be a low-cost solution to lane departure and curve-over-speed warnings. A number of methods and implementations have been reported in the literature. However, reliable detection is still an issue because of cast shadows, worn and occluded markings, variable ambient lighting conditions, for example. We focus on increasing detection reliability in two ways. First, we employed an image feature other than the commonly used edges: ridges, which we claim addresses this problem better. Second, we adapted RANSAC, a generic robust estimation method, to fit a parametric model of a pair of lane lines to the image features, based on both ridgeness and ridge orientation. In addition, the model was fitted for the left and right lane lines simultaneously to enforce a consistent result. Four measures of interest for driver assistance applications were directly computed from the fitted parametric model at each frame: lane width, lane curvature, and vehicle yaw angle and lateral offset with regard the lane medial axis. We qualitatively assessed our method in video sequences captured on several road types and under very different lighting conditions. We also quantitatively assessed it on synthetic but realistic video sequences for which road geometry and vehicle trajectory ground truth are known.     

Effects of injection parameters on the spray characteristics of swirl and slit injectors using the Mie-scattering method

We investigated the effects of injection parameters such as injection pressure, ambient pressure, and ambient temperature on spray characteristics. We calculated the turbulence occurring point (t _c ), defined as the time required to generate a vortex, and the deceleration point (t _b ), defined as the time when spray penetration begins to decelerate, to elucidate the breakup mechanism of the test injectors. The spray velocity coefficient (C_v) was obtained to evaluate the spray characteristics. As the ambient pressure increases in the case of a slit injector, C_v decreases. We investigated the effects of nozzle tip shape according to injection pressure, ambient pressure, and fuel properties on spray characteristics and provide a C_v value of 0.38 for the swirl injector with a spray angle of 60° and the slit injector under atmospheric conditions. The value of C_v in the case of a slit injector was reduced by increasing the ambient pressure. Our results suggest that C_v of a swirl injector is constant regardless of changes in ambient pressure, injection pressure, and fuel properties. On the other hand, C_v of a slit injector is altered by changes in ambient pressure.     

Design and optimization of an LPG roller vane pump for suppressing cavitation

A roller vane type liquefied petroleum gas (LPG) pump was developed for a liquid phase LPG injection (LPLi) engine. Most of the LPG pumps used in the current LPLi engines are installed inside of the LPG tank, but this pump is intended to be installed outside of the LPG tank to overcome the difficulty of fixing an in-tank pump. Because LPG has a low boiling point and high vapor pressure, it usually causes cavitation in the pump and consequently deteriorates the flow rate of the pump. The purpose of this work is to optimize the design of the roller vane pump in order to suppress cavitation and increase the fuel flow rate by using a computational fluid dynamics (CFD) analysis. In order to achieve these goals, the intake port configuration and the rotor of the roller vane pump were redesigned and simulated using STAR-CD code. Computation was performed for six different models to obtain the optimized design of the roller vane pump at a constant speed of 2600 rpm and a constant pressure difference between the inlet and outlet of 5 bar. The computation results show that an increased intake port cross-section area can suppress cavitation, and the pump can achieve a higher flow rate when the rotor configuration is changed to increase its chamber volume. When the inlet pressure difference is 0.1 bar higher than the fluid saturation pressure, the pump reaches its maximum flow rate.