The potential for real-time passenger information as part of an integrated bus-control/information system

This paper is concerned with the effect of linking innovative bus-control systems with real-time passenger information, with the overall aim of improving conditions for bus operation and passengers in central urban corridors. The first section presents a concise review of bus passenger information systems (particularly their application at bus stops). Then the concept of real-time passenger information is explored. The case for and against real-time information is argued and two British case-studies follow. In the second section it is argued that the provision of real-time information, as part of an integrated bus-control/information system, offers new possibilities for meeting the identified needs of public transport users. Finally, in the third section, some comments are made on the evaluation of different combinations of bus-control and passenger information tested using a simulation method and a series of subjective response surveys. General relationships governing the degree of bus-control required and the extent of information needed are of special interest.     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

The association of the population recruitment of gulf menhaden, Brevoortia patronus, with Mississippi River discharge

Gulf menhaden, Brevoortia patronus, which constitutes a major industrial reduction fishery in the USA, spawn across the northern Gulf of Mexico with a focus of spawning about the Mississippi Delta. This species is estuarine dependent; adults spawn over the continental shelf and their larvae are transported, by mechanisms that are presently not well understood, to estuarine nursery areas. Larval gulf menhaden, along with some other surface oriented larval fishes, appear to aggregate along the Mississippi River plume front, while evidence of the ecological consequences of this aggregation in terms of the feeding, growth, and survival of larvae is ambiguous. On an annual scale, Mississippi River discharge is negatively associated with numbers of half year old recruits. Discharge of the Mississippi River and the population recruitment of gulf menhaden may be plausibly linked through the action of the river's plume and its front on the shoreward transport of larvae. Greater river discharge results in an expansive plume that might project larvae farther offshore and prolong the shoreward transport of larvae. An indirect, decadal scale, positive response of recruitment and river discharge is possible, but not certain. Recruitment became elevated after 1975 when river discharge increased and became highly variable. This response might owe to enhanced primary and secondary production driven by nutrient influx from the Mississippi River.     

Maritime accident investigation and temporal determinants of maritime accidents: A case study

This paper presents the results of an investigation into temporal determinants of maritime accidents based on a data-set obtained from the proceedings of formal inquiries in the former German Democratic Republic (GDR). The results show that there is no statistically significant outcome between the probability for an accident and the time of watch. Thus the results do not confirm previous studies, which reported significant time of day effects.The outcome of this study indicates that marine inquiries can provide useful data for an analysis of underlying causes of maritime accidents. It is suggested that accident inquiries should be extended into the area of watch systems employed and should record the hours of work and of rest of the officers on the watch involved in a maritime accident.     

The role of professional associations in shipping

This article is in three parts. The first covers the historical development of qualifying associations. The second covers the particular role of maritime institutions that include The Royal Institution of Naval Architects, The Institute of Marine Engineering Science and Technology and The Nautical Institute. The third and final section considers the future for maritime professional associations in the context of international shipping.     

Environmental trends of ports and harbours: Implications for planning and management

The traditional view of ports as evolving from human settlements to distribution centres is re-examined in an ecological context. The discussion is essential because of the persisting traditional approach to 'global' port development, i.e. directed primarily by technological optimization related to cargo transfer and ocean trasportation. Growing environmental concerns and realities indicate the need for a broader environmental view in which the port is recognized as part of a larger interactive coastal ecosystem, with environmental pressures by the port on the surrounding environment, as well as by the environment on the port. The paper argues for an ecological basis for coastal port development, analyses the environment implications of riverine linkages between port and hinterland, and details some environmental consequnces of changing industrialization and chemical practices. It also identifies initiatives for relevant planning and future port management.     

Regional impacts of new transport infrastructure: a multisectoral potentials approach

This is the second of two background papers sponsored for the Symposium by the Administrative Commission for the north of the Netherlands. Its purpose is to provide an indication of the effects of the proposed high speed rail line between Amsterdam, Groningen and Hamburg on employment in the corridor. The authors first review the techniques of forecasting these effects discussed in the literature. The potentials approach is adopted for their analysis, the mathematics and underlying assumptions of which are presented. Finally, this model is run to provide an estimate of the impact on regional employment of three variants of the proposed rail line.     

Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

Design optimization of a torpedo shell structure

An optimized methodology to design a more robust torpedo shell is proposed. The method has taken into account reliability requirements and controllable and uncontrollable factors such as geometry, load, material properties, manufacturing processes, installation, etc. as well as human and environmental factors. The result is a more realistic shell design. Our reliability optimization design model was developed based on sensitivity analysis. Details of the design model are given in this paper. An example of a torpedo shell design based on this model is given and demonstrates that the method produces designs that are more effective and reliable than traditional torpedo shell designs. This method can be used for other torpedo system designs.     

An investigation of the performance of an electronic in-line pump system for diesel engines

WIT Electronic Fuel System Co., Ltd. has developed a new fuel injector, the Electronic In-line Pump （EIP） system, designed to meet China＇s diesel engine emission and fuel economy regulations. It can be used on marine diesel engines and commercial vehicle engines through different EIP systems. A numerical model of the EIP system was built in the AMESim environment for the purpose of creating a design tool for engine application and system optimization. The model was used to predict key injection characteristics under different operating conditions, such as injection pressure, injection rate, and injection duration. To validate these predictions, experimental tests were conducted under the conditions that were modeled. The results were quite encouraging and in agreement with model predictions. Additional experiments were conducted to study the injection characteristics of the EIP system. These results show that injection pressure and injection quantity are insensitive to injection timing variations, this is due to the design of the constant velocity cam profile. Finally, injection quantity and pressure vs. pulse width at different cam speeds are presented, an important injection characteristic for EIP system calibration.