软土地基水下真空预压固结离心模型试验

采用新发明的真空吸水系统应用于离心机中,可以使土体产生向上渗流并模拟软土地基真空预压。为获得理想的水下真空预压固结对比效果,竖井采用2种不同井间距的砂井,密封膜采用完全覆盖的形式。用发明的装置产生水下真空得以模拟软土水下固结行为。介绍了模型制作、试验程序及真空发生系统,并分析了孔隙水压力、变形、不排水剪切强度的改变和不同井间距对固结速率的影响。     

基于纸纤维改性的隧道工程透水砂浆性能研究北大核心CSCD

为提出一种适用于隧道初期支护基面找平并且具有一定透水性能的砂浆,将纸纤维加入砂浆试块中对其性能进行改性。通过分析纸纤维的降解原理,并将不同掺量的纸纤维加入砂浆试块中,对其体积密度、吸水率、抗压强度等基本性能指标及微观结构进行测试和分析。由试验结果可知:在碱性环境中,纸纤维具有可降解的性能特点;纸纤维可以使普通砂浆试块的吸水率提升2~3倍,同时也会造成砂浆试块的体积密度和抗压强度降低;对砂浆试块吸水率和抗压强度进行线性拟合后发现其吸水率和抗压强度呈现负相关关系。研究结果表明,通过纸纤维对砂浆进行透水性能的提升是可行的,但是纸纤维掺量对砂浆其他性能的影响还有待进一步研究。     

Editorial Comment

This article examines fundamental questions concerning the origins and evolution of academic transport studies and the dynamics of its historical development. These fundamental questions are generally little discussed, yet are vital in gaining a better understanding of how the subject is driven forward. This article therefore attempts to answer these questions by taking the UK as a case study, with the principal method being evidence from semi-structured interviews with 20 senior figures integrally involved in the development of the subject. The characterization of transport studies provided by Allsop is employed as an analytical framework, enabling the construction of a historical narrative that can provide salient insights. Thus, it is argued that for academic transport studies the degree of early cross-fertilization with public arenas has meant that subsequent developments have been shaped by the subject's contextual environment. Most prominent among these developments has been the trend towards wider disciplinary breadth. This article examines the evolution of these processes, while the concluding section discusses their implications for consequent strengths and limitations of the subject.     

Estimation of road profile variability from measured vehicle responses

When assessing the statistical variability of fatigue loads acting throughout the life of a vehicle, the question of the variability of road roughness naturally arises, as both quantities are strongly related. For car manufacturers, gathering information on the environment in which vehicles evolve is a long and costly but necessary process to adapt their products to durability requirements. In the present paper, a data processing algorithm is proposed in order to estimate the road profiles covered by a given vehicle, from the dynamic responses measured on this vehicle. The algorithm based on Kalman filtering theory aims at solving a so-called inverse problem, in a stochastic framework. It is validated using experimental data obtained from simulations and real measurements. The proposed method is subsequently applied to extract valuable statistical information on road roughness from an existing load characterisation campaign carried out by Renault within one of its markets.     

Modeling multi-unit vehicle dynamics for low-speed path-following assessment off-highway

This paper proposes a non-linear dynamics model for articulated vehicles. This model is able to capture common low-speed behaviours of any articulated vehicles off-highway, such as operating for a corner or roundabout on a cambered or slippery surface. It can be used to assess the low-speed manoeuvrability of articulated vehicles under such manoeuvres and conditions. The vehicle model was validated by comparing its path tracking performance to that of the field tests.     

Competition and ownership in land passenger transport: the fourth international conference — Part 2

In the rail industry worldwide, there has been a search for new solutions, including restructuring, corporatization, and outright privatization, but the complexity of the rail industry offers special problems. In the Workshop we looked in detail at the British, Swedish, German, Australian (New South Wales) and New Zealand experiences, as well as considering more general issues such as cost structures, vertical separation and competitive tendering. Whilst it was agreed that some developments, such as greater contracting out, were clearly beneficial, other developments such as the separation of infrastructure from operations remained of uncertain value until the issues of efficient pricing and slot allocation were resolved.     

A programmable calculation procedure for number of traffic conflict points at highway intersections

Traffic movement conflict points at intersections are the points at which traffic movements intersect (including crossing, merging, and diverging). Numbers and distribution of different types of conflict points are used to evaluate intersection access management designs and safety performance. Traditionally, the determination of the numbers of conflict points for different traffic movements is based on manual methods, which causes the difficulty for computerized procedures to evaluate safety performance of different access management designs. Sometimes, a programmable calculation procedure may provide more effective solutions as compared with manual methods. This paper presents a programmable calculation procedure for the determination of the numbers of conflict points, which could be used as a basis for a computerized procedure. Concepts of virtual movement lanes and intersection quadrants are introduced to specify types of intersections, traffic lane configurations, and traffic movement regulations. Calculation models, based on such concepts, for traffic movement conflict points at signalized and unsignalized intersections can be obtained. In support of the procedure, case studies are presented in the paper. The procedure presented in the paper can be programmed into a computer program for the purpose of a computerized evaluation of intersection safety and design performance of different access management or control approaches. Copyright © 2012 John Wiley & Sons, Ltd.     

A Study in Port Planning: The Example of Mina Zayed

The correct number of berths that a port should provide is solved by a model which minimizes the total port usage cost in terms of the costs of berth provision and the costs accruing to ships from time spent in the port. This model is then applied to Mina Zayed in the Arabian Gulf as an aid to future planning, and from different sets of cargo forecasts an optimal stategy is derived using a game-theoretic approach.     

The impact of job assignment rules for straddle carriers on the throughput of container terminals

Straddle carriers represent a critical resource in the handling of containers within a container terminal. It is essential that they are deployed in an as efficient manner as possible. The research presented in this paper is motivated by the need to critically evaluate job assignment rules for straddle carriers that operate in a multiple straddle environment. This is achieved by developing a discrete event simulation model using industrial simulation software to model a container terminal located in Melbourne, Australia. The model accounts for variables such as the number of straddle carriers needed, the speed of straddle carriers, the arrival rate of trucks, and the job assignment rule. A principal finding of the study is that increasing the number of straddles in the present set‐up from 6 to 7 has a negligible effect on daily throughput. However, an increase in the number of straddles to 7 is expected to have a profound effect on reducing the average waiting time of trucks within the terminal from over 16 minutes to under 9 minutes, a decrease of 46.5%. However, a further increase in the number of straddles results in no further increase in daily throughput. It was observed that the throughput of the terminal is very sensitive to the speeds at which straddles travel. The management of the terminal has proposed a new heuristic job assignment rule for straddles, because the present rule does not assign the jobs to straddles closest to the truck requesting to load or unload a container. As a result a new heuristic job assignment rule was tested. The simulation results revealed that both the old and new rules performed equally well using performance indicators such as average container flow time, daily throughput, average waiting time of jobs, number of jobs in the queue, and straddle utilisation. Therefore, the new rule will not improve these performance measures if implemented