An Investigation of High-Speed Automobile Steering Response

The significance of the effects of steering compliance and aerodynamic life on high speed automobile's steering response was investigated on two vehicles, a Ford Falcon XW (1969) station-wagon and a GM-Holden Kingswood HQ (1974) sedan. An aerofoil was mounted above the front bumper bar of the Ford Falcon to enable the simulation of vehicles with very degraded aerodynamic characteristics. Mathematical analysis showed the importance of the inclusion of steering compliance effects in determining stability factor, and hence the vehicle's high speed yaw rate sensitivity. Both experiments and theory showed that the actual high speed yaw rate response is not significantly less than that predicted from a low speed skid pad test, however, slight errors were found which are likely to be due to steering system nonlinearity and the effects of aerodynamic lift.     

Characterizing the speed and paths of shared bicycle use in Lyon

Data gathered relating to the Lyon’s shared bicycling system, Vélo’v, is used to analyze 11.6 millions bicycle trips in the city. The data show that bicycles now compete with the car in terms of speed in downtown Lyon. It also provides information on cycle flows that can be of use in the planning of dedicated bicycle lanes and other facilities.     

Strategies of developing part administration in Ireland

This paper reivews a programme recently undertaken by the Irish Government aimed at reforming the administration of Irish ports. Arising from that programme, and as a result of legislative changes, eight key ports were vested as commerical harbour companies (prior to this they were administered by large Boards and were very restricted in their ability to perform commercially). The context for the paper is the global trend towards port reformation, and the paper draws particuarly on the effects of the privatization of UK ports. The paper starts with a review of the role of parts, both generally and within the context of Ireland's growing, geographically peripheral, economy. Observations of the UK ports privatization process are next considered. The history, development and recent performance of Irish ports, together with port investment strategies, are critiqued and the background to the recent programme of administrative reform undertaken by the Irish Government concerning the ports is reviewed. Various observations from a number of sources (including 12 interviews by the authors with key actors in the sector) on the reform process are discussed. It is concluded that there is no uniformity of opinion as to the suitability of the chosen model for Irish ports administration and that it is too soon to judge whether it has been a success (the eight ports were commercialized in March 1997). The paper concludes that, given the critical role of ports within the Irish economy, the situation should be periodically reviewed to ascertain the current applicability of the extant port administration model.     

Book review

Coastal Management: Readings and Notes. Edited by Marc J. Hershman and James H. Feldmann. Institute for Marine Studies, Coastal Resources Program, University of Washington, Seattle (January 1979), 806 pp. $22.50 (paper bound).

Tobey L. Winters, Deepwater Ports in the United States: An Economic and Environmental Impact Study. N.Y. Praeger, 1977, 201 pages.     

Controls on stratification in the Rhine ROFI system

Stratification in the Rhine ROFI is very variable; the mean water column stability is controlled by the combined effect of tidal, wind and wave stirring which, at times, brings about complete vertical homogeneity. Control by the mixing variables has been elucidated by a regression analysis of mean stratification on the components of the windstress and significant wave height. There is strong partial correlation with all three variables which explains between 56% and 65% of the variance in two time series of observations in October 1990 and September 1992, respectively. During periods of low stirring the water column was observed to re-stratify over the whole inshore region through the relaxation of the horizontal gradients under gravity and with the influence of rotation. Superimposed on the mean stratification there is strong semi-diurnal variation, occurring throughout the stratified region at times of reduced mixing. The amplitude of this semi-diurnal variation is of the same order as the mean stability and frequently results in conditions being mixed or nearly mixed once per tide. This semi-diurnal variation results primarily from cross-shore tidal straining which interacts with the main density gradient to induce stratification. The hypothesis that water column stability is controlled by the combination of these processes has been tested using a reduced physics model which has been successful in reproducing the main features of both the mean and semi-diurnal components of stratification.     

增加调节参数代替联动坐标加工特种回转面刀具

提出了通过增加安装调节参数来代替部分数控联动坐标,加工特种回转面刀具的方法,该方法减少了对机床的要求,又改善了加工条件和齿槽形状,只要用 3坐标联动的机床或数控装置便可加工出原本需5坐标甚至6坐标数控才能加工的刀具。     

Effects of small-scale turbulence on the growth of two diatoms of different size in a phosphorus-limited medium

The effect of turbulence on the nutrient flux towards osmotrophic cells is predicted to be size dependent. This should translate into growth. We experimentally followed and modelled the growth of two marine diatoms of different size (Thalassiosira pseudonana, 6 μm in diameter and Coscinodiscus sp., ca. 109 μm in diameter) under still water and turbulent conditions, using a shaker table. Experiments were done with phosphorus-limited cultures and lasted for ca. 5 days. Turbulence enhanced the growth of Coscinodiscus sp. in agreement with theory but not the growth of T. pseudonana, which was actually slightly lower under turbulence. At the end of the experiments there were about 1.7 times as many Coscinodiscus sp. cells in the turbulent treatment than in the still treatment, while for T. pseudonana almost the same cell concentration was found in both conditions. In addition, the Coscinodiscus sp. cells growing under still conditions presented a higher specific alkaline phosphatase activity than those growing in turbulence which indicates a higher need for phosphorus in the still cultures. A simple dynamic model, based on Michaelis–Menten nutrient uptake kinetics, needed nearly no optimisation other than using observed initial conditions of phosphate and cell concentrations. The model showed how an increased nutrient flux towards the cells translates non-linearly into cell growth, most likely by affecting the half-saturation constant (K_M). However, since Coscinodiscus sp. experienced significant mortality and cells partially settled to the bottom of the containers, unequivocal support for the size-dependent effect of turbulence on nutrient uptake will require further experiments and more sophisticated modelling. The mechanisms to connect an increased nutrient flux towards cells with population growth and whether this process is size dependent are important in parameterizing the effects of turbulence on marine plankton in coupled physical–biological models.     

Effective Public Participation is Fundamental for Marine Conservation—Lessons from a Large-Scale MPA

The Representative Areas Program (RAP) was, at the time, the most comprehensive process of community involvement and participatory planning for any environmental issue in Australia. The RAP was a key component of the widely acclaimed rezoning of the Great Barrier Reef Marine Park, and although completed in 2003, many lessons learned are still relevant today. This paper provides an analysis of the comprehensive public participation program that significantly influenced the final planning outcome. It provides insights into a fundamental component of effective marine planning, assessing what worked well and what did not in terms of public engagement. Some aspects of the public participation program were innovative, and some were more effective than others. The outcome was one-third of the Marine Park was declared as highly protected no-take zones in 2004, with the remainder of the park also zoned to provide lower levels of protection. The methods used to engage the public and the 25 lessons discussed in this paper should be of interest for practitioners, policy makers and academics elsewhere aiming for “good practice” approaches to achieve environmental conservation.     

Hydroelastic analysis of a rectangular plate subjected to slamming loads

A hydroelastic analysis of a rectangular plate subjected to slamming loads is presented. An analytical model based on Wagner theory is used for calculations of transient slamming load on the ship plate. A thin isotropic plate theory is considered for determining the vibration of a rectangular plate excited by an external slamming force. The forced vibration of the plate is calculated by the modal expansion method. Analytical results of the transient response of a rectangular plate induced by slamming loads are compared with numerical calculations from finite element method. The theoretical slamming pressure based on Wagner model is applied on the finite element model of a plate. Good agreement is obtained between the analytical and numerical results for the structural deflection of a rectangular plate due to slamming pressure. The effects of plate dimension and wave profile on the structural vibration are discussed as well. The results show that a low impact velocity and a small wetted radial length of wave yield negligible effects of hydroelasticity.     

Experimental investigation of the strength and stability of submarine pressure hulls with and without artificial corrosion damage

A submarine may have to operate for a period of time with local corrosion damage in the pressure hull if a suitable repair method is unavailable or too expensive for implementation. This paper describes collapse tests on twenty ring-stiffened aluminium cylinders, which were conducted to study the effect of corrosion damage on hull strength and stability. Artificial hull thinning was found to reduce the collapse strength of experimental models through high local stresses in the corroded region, leading to early onset of yielding and inelastic buckling. Bending associated with the eccentricity due to one-sided thinning was found to further increase the local stresses in the hull. Overall collapse pressures were more severely affected by corrosion damage than interframe collapse pressures. The percentage reduction in overall collapse pressure, compared with intact experimental models, was found to be closely related to the percentage depth of thinning. The accuracy of conventional collapse pressure predictions for the experimental models was significantly better for intact than for corroded cylinders.