Vehicle modeling with nonlinear tires for vehicle stability analysis

The dynamic stability of a vehicle depends on various maneuvering features, such as traction, braking, and cornering. This study presents nonlinear vehicle models for estimating the stability region and simulating the dynamic behavior of a vehicle. Two types of vehicle models were found by considering the degrees of freedom and linearity. A simple model with nonlinear tire dynamics is useful for determining the stability region, while a complex model (a multi-body dynamic model in MSC.ADAMS) is appropriate for carrying out accurate simulations. Actual data for a mid-sized passenger car were used, and the models were validated by comparison with test results.     

Characteristics on NOx adsorption and intermediates of LNT catalyst

Several NOx reduction technologies under development in recent years have now been commercialized, including selective catalytic reduction (SCR) with NH₃ or hydrocarbons, and Lean NOx Trap. The aim of the present study is to investigate characteristics on NOx adsorption according to the oxygen concentration, de-NOx performance according to lean/rich injection cycle and toxic intermediates at LNT downstram for lean-burn gasoline engine. Under oxygen of 6%, NOx storage capacity was the highest, showed the highest NOx conversion of 98%. The reason for this phenomena is because the excited oxygen atoms at high oxygen concentration increased oxidizing power of NO. Under low temperature of 205°C, LNT catalyst showed the least NOx conversion of 14% because its activity became lower, while the generation rate of toxic HNCO was highest as CO which is generated during the rich condition, reacts with NOx stored on Ba site.     

Nano-particle emission characteristics of European and Worldwide Harmonized test cycles for heavy-duty diesel engines

This study was conducted for the experimental comparison of particulate emission characteristics between the European and World-Harmonized test cycles for a heavy-duty diesel engine as part of the UN/ECE PMP ILCE of the Korea Particulate Measurement Program. To verify the particulate mass and particle number concentrations from various operating modes, ETC/ESC and WHTC/WHSC, were evaluated. Both will be enacted in Euro VI emission legislation. The real-time particle emissions from a Mercedes OM501 heavy-duty golden engine with a catalyst based uncoated golden DPF were measured with CPC and DMS during daily test protocol. Real-time particle formation of the transient cycles ETC and WHTC were strongly correlated with engine operating conditions and after-treatment device temperature. The higher particle number concentration during the ESC #7 to #10 mode was ascribed to passive DPF regeneration and the thermal release of low volatile particles at high exhaust temperature conditions. The detailed average particle number concentration equipped for golden DPF reached approximately 4.783E+11 #/kWh (weighted WHTC), 6.087E+10 #/kWh (WHSC), 4.596E+10 #/kWh (ETC), and 3.389E+12 #/kWh (ESC). Particle masses ranged from 0.0011 g/kWh (WHSC) to 0.0031 g/kWh (ESC). The particle number concentration and mass reduction of DPF reached about 99%, except for an ESC with a reduction of 95%.