Quality indicators and capacity calculation for RoRo terminals

Abstract

Road freight transportation has increased dramatically over recent years along with its impacts such as congestion, noise, and pollution. As a result, European and US governments have started policies to promote alternatives to road transportation, such as logistic chains containing a Short Sea Shipping (SSS) link. Road is, by definition, a more flexible means of transportation than shipping, which is usually cheaper. Therefore, to move traffic to SSS chains, it is necessary to provide fast, frequent, and reliable maritime transportation. In this sense, roll-on/roll-off (RoRo) vessels are the most convenient ships to be used, since they have smaller dwell times in port and, therefore, this is a kind of traffic likely to increase dramatically. The foreseeable increase of this kind of traffic must meet with an increase in the actual capacity by means of either improvement in performance and possible enlargements of existing terminals or the construction of new terminals. In that sense, this paper proposes a simple methodology to calculate the capacity of a RoRo terminal, whether already in operation or during its design process, and relate it to some quality standards by means of quality indicators, which should lead to the definition of Levels of Service similar to those already used in roads and airports. The paper ends by applying the methodology to a real terminal in Barcelona, Spain.     

New procedure to estimate the brake warping in a roller tester

Vehicle systems such as the steering, brakes and suspension greatly influence vehicle safety. Therefore, these systems must be inspected to guarantee that they are functioning correctly and to certify that the vehicle is functioning at a satisfactory safety level. In disc brakes, warping is one of the principal reasons for vibrations and noise, and it contributes to diminished brake efficiency. Currently, the International Motor Vehicle Inspection Committee (CITA) demands disc brake warping inspections occur during periodic motor vehicle inspections (PMVIs); however, the procedure to carry out this inspection is not well defined. In this investigation, the warping phenomenon has been analyzed, and a new inspection procedure is proposed.     

A traffic analysis zone definition: a new methodology and algorithm

This paper develops a comprehensive approach to the definition of transportation analysis zones (TAZ), and therein, presents a new methodology and algorithm for the definition of TAZ embedded in geographic information systems software, improves the base algorithm with several local algorithms, and comprehensively analyses the obtained results. The results obtained are then compared to these presently used in the transportation analysis process of the Lisbon Metropolitan Area. The proposed algorithm presents a new methodology for TAZ design based on a smoothed density surface of geocoded travel demand data. The algorithm aims to minimise the loss of information when moving from a continuous representation of the origin and destination of each trip to their discrete representations through zones, and focuses on the trade-off between the statistical precision, geographical error, and the percentage of intra-zonal trips of the resulting OD matrix. The results for the Lisbon Metropolitan Area case study suggest a significant improvement in OD matrix estimates compared to current transportation analysis practises based on administrative units.

An analysis of the Spanish high capacity road network criticality

The analysis of complex networks has been carried out in different fields using an ample variety of method and concepts. Recently, in the general literature of regional economics, the concepts of resilience, connectivity, vulnerability and criticality have been gaining their momentum. The aim of this paper is to provide an analytical framework, using well-known accessibility indicators, in order to calculate the critical links or road sections of the Spanish high-capacity road network. Our analysis will be based on approximately four hundred sections that will be classified in five different groups according to their criticality degree in the whole network. Our analysis will be complemented with the comparison of the results obtained in five different scenarios, namely the average criticality using the effects on the whole country, Madrid, Barcelona, Valencia and Pontevedra. Furthermore, the paper will also analyze what kind of intrinsic characteristics of the sections favor or not the links’ criticality using a method based on a classification and regression tree. This analysis is crucial to understand other important concepts that are recently being studied in network and spatial economics, like, for example, resilience and vulnerability. It is concluded that the number of relations or routes, being a trunk or not, the road density and the time to Madrid capital play an important role in the criticality of the roads section in the high capacity road network.     

The changing role of decision support instruments in integrated infrastructure planning: lessons from the Sustainability Check

This article draws lessons about recent innovations in decision support for coping with challenges in integrated infrastructure planning strategies. After setting up a conceptual framework for the scope of analysis and the use of information in infrastructure planning, the empirical section explores the introduction of early-stage sustainability assessment tools. Data collection draws on experiences gained in the Netherlands with a new tool: ‘Sustainability Check’. We conclude that such instruments have a number of capacities that address the challenges of area-oriented planning: (a) bringing together information about the comprehensive value of alternatives, (b) facilitating the generation of alternatives, (c) addressing institutional fragmentation by learning about referential frames, and (d) adding contextual perspectives to the ‘hard’ outcomes of conventional tools. We also conclude that tools such as Sustainability Check should not be seen as a replacement for conventional decision support tools, but rather as complementary to them.     

Latent lifestyle and mode choice decisions when travelling short distances

In the quest for sustainable travel, short distances appear the most amenable to curbing the use of the automobile. Existing studies about short trips evaluate the potential of shifting from the automobile to sustainable travel options while considering the population as homogeneous in its preferences and its tendency to accept these alternative travel options as realistic. However, this assumption appears quite unrealistic and the current study offers a different perspective: the mode choices when travelling short distances are likely related to lifestyle decisions. Short trip chains of a representative sample of the Danish population in the Copenhagen Region were analysed, and more specifically a latent class choice model was estimated to uncover latent lifestyle groups and choice specific travel behaviour. Results show that four lifestyle groups are identified in the population: car oriented, bicycle oriented, public transport oriented and public transport averse. Each lifestyle group has specific perceptions of travel time (with extremely different rates of substitution between alternative travel modes), transfer penalties in public transport trip chains, weather influence (especially on active travel modes), and trip purpose effect on mode selection. Consequently, when thinking about measures to increase the appeal of sustainable travel options, decision-makers should look at specific individuals within the population and more sensitive individuals to comfort and level-of-service improvements across the lifestyle groups.     

Port choice in container market: a literature review

As a result of the intense changes occurring in port environment over the last decades, new models of competitiveness have been developed, where port authorities try to increase their attractiveness. In this context, one of the most debated issues in this area of research is still the role played by port authorities in defining port competitiveness. The aim of this paper is to provide a review of port choice literature enabling to identify the main port choice’s criteria in order to define the role played by Port Authorities and to point out future lines of research that should be undertaken to fully incorporate current ports’ environment and performance. The results show that although some studies point out the importance of geographical factors in port choice, a larger number of studies defend the increasing role played by port authorities in determining the competitiveness through investing in port infrastructure, improving port efficiency or hinterland accessibility. Despite the existing models contributing on this topic, there are still some gaps in terms of measuring the port performance, including port strategies and studying the port choice for specific industries.     

Stockholm congestion charging: an assessment with METROPOLIS and SILVESTER

This paper reviews and compares the performance of two dynamic transportation models – METROPOLIS and SILVESTER – which are used to predict the impacts of congestion charging for Stockholm. Both are mesoscopic dynamic models treating accumulation and dissipation of traffic queues, route choice, modal split and departure time choice. The models are calibrated independently for the baseline situation without charges and applied to forecast the effects of congestion charging. The results obtained from the two models are mutually compared and validated against the actual outcome of the Stockholm congestion charging scheme. Both models successfully predict the outcomes of the congestion charging trial at both aggregate and disaggregate levels. Results of welfare analysis, however, differ substantially due to differences in model specification.     

A cooperative waiting strategy based on elliptical areas for the Dynamic Pickup and Delivery Problem with Time Windows

The purpose of this paper to present a cooperative scheduling algorithm for solving the Dynamic Pickup and Delivery Problem with Time Windows (DPDPTW). The idea behind cooperative waiting strategies is to calculate simultaneously the waiting times for all nodes in the solution. Classical non‐cooperative scheduling algorithms perform the scheduling for each route independently of the scheduling of the other routes. We present the Cooperative Scheduling Problem (CSP) based on the elliptical areas generated by vehicles waiting at their nodes. The CSP is solved by means of a genetic algorithm and is evaluated by using a set of benchmarks based on real‐life data found in the literature. Initially, two waiting strategies are presented: Wait‐Early‐Time scheduling and Balanced‐Departure scheduling. Extensive empirical simulations have been carried out by analyzing the degree of dynamism and the average waiting time, a new concept defined to take into account the gap between the time windows of pickup and delivery nodes. Copyright © 2016 John Wiley & Sons, Ltd.