A comparison of Chinese,Japanese, and Korean shipyard production technology

This paper compares Chinese, Korean, and Japanese shipyard production technology. Development in the world shipbuilding over recent years has influenced focus areas related to shipyard manufacturing technologies and product performance. Software systems, information technology, production technology, and local challenges of shipyards are compared with shipbuilding outputs among these three countries. Various technologies developments, shipyard production and the problems in Chinese, Japanese, and Korean shipyards are discussed respectively. Finally, future areas of research are pointed out.     

中小型海工辅助船的应急拖带模式的设计方案

根据IMO通函MSC.1/Circ.1255和CCS《海上拖航指南》对船舶应急拖带的有关要求,以8000 HP深水三用工作船为例分别在甲板动力可提供及甲板动力不可提供时的拖带模式进行了论述,对拖航限制载荷的计算过程进行描述,对不同情况下拖航限制载荷的选取进行说明.该船工作环境复杂,作业性质多样,拖航限制载荷计算及拖带模式适用于绝大多数中小型的海工辅助船,对类似船舶应急拖带程序的编制也有参考意义.     

Ship hull plate processing surface fairing with constraints based on B-spline

The problem of ship hull plate processing surface fairing with constraints based on B-spline is solved in this paper. The algorithm for B-spline curve fairing with constraints is one of the most common methods in plane curve fairing. The algorithm can be applied to global and local curve fairing. It can constrain the perturbation range of the control points and the shape variation of the curve, and get a better fairing result in plane curves. In this paper, a new fairing algorithm with constraints for curves and surfaces in space is presented. Then this method is applied to the experiments of ship hull plate processing surface. Finally numerical results are obtained to show the efficiency of this method.     

Numerical simulation of three-dimensional combustion flows

A finite-rate method is used to simulate the three-dimensional combustion process in a plasma generator with CH4 as the fuel. The simulation was run with RNG k-ε model to simulate turbulence, with eddy-dissipation-concept （EDC） model to simulate the combustion and with discrete ordinates model to simulate radiation. The numerical results show that the flow field characteristics and the parameter distributions are under the condition of rich fuels, and these results provide valuable information when optimizing the plasma generator design and organizing its flow fields.     

Fundamental research on resistance reduction of surface combatants due to stern flaps

It is well known that a decrease in ship resistance may be achieved due to the installation of a stern flap. Therefore, so far, a considerable amount of research on stern flaps has been conducted. Previous research has demonstrated that the primary mechanism by which a stern appendage reduces resistance is a change in the pressure distribution over the aft body of the hull, and secondly through effects on the running attitude, near and far field wave generation, and local transom flow among other phenomena. However, the change in pressure distribution is influenced by the other components. Hence, there is still room for argument about the relative contribution of each component to the pressure distribution. Therefore, as the first step of the research, by conducting the model experiment in towing tank and CFD (Computational Fluid Dynamics) analysis, we examined the effect of running attitudes and wave making at the after portion of the hull on resistance reduction. As a result, it is concluded that a flap affects a change in the wave generated at the transom part and it could lead to a decrease in wave-making resistance.     

Investigation of pitch motion portion in vertical response at sides of a Tension-Leg Platform

Tendons vertically moor Tension-Leg Platforms (TLPs), thus, a deep understanding of physical tendon stresses requires the determination of the total axial deformation of the tendons, which is a combination of the heave, pitch, and surging responses. The vertical motion of the lateral sides of the TLP is coupled with surge and constitutes a portion of the pitch motion. Tendons are connected to the sides of the TLP; hence, the total displacement of the lateral sides is related to the total deformation of the tendons and the total axial stress. Therefore, investigating the total vertical response at the sides of the TLP is essential. The coupling between various degrees of freedom is not considered in the Response Amplitude Operator (RAO). Therefore, in frequency domain analysis, the estimated vertical RAO is incomplete. Also, in the time domain, only the heave motion at the center of TLP is typically studied; this problem needs to be addressed. In this paper, we investigate the portion of the pitch motion in the vertical response at the sides of the TLP in both the frequency and time domains. Numerical results demonstrate a significant effect of the pitch motion in the vertical motion of the edges of the TLP in some period ranges.     

Ballast Water Risk Indication for the North Sea

The ballast water from ships carries marine organisms that have invasive potential. The International Maritime Organization Ballast Water Management Convention (2004) requires ballast water exchange or ballast water management (BWM) systems either onboard or ashore. Ships can be exempted on the basis of risk assessment, when exclusively sailing between specific ports or in an enclosed area. In reply to our questionnaire, the shipping sector argues that the North Sea is ecologically homogeneous and exemptions could therefore be granted. This paper proposes that the North Sea area is, in fact, not homogeneous in terms of hydrographical and biological conditions; therefore, ballast water is a relevant transport mechanism for organisms. Within the North Sea, the short shipping routes indicate a high risk for survival. We examined actual simulation models for ballast water risk assessment in the North Sea, and we have identified the major parameters that need to be included in such models. These models provided a basis; they further need to be combined and adapted for the purpose of evaluating the rationale for an exemption. We concluded that exemptions from BWM are not recommended for the North Sea area. Anticipating the Ballast Water Management Convention, ship owners might do well to study possibilities for installing BWM systems onboard.     

The UN’s 2030 Agenda for sustainable development and the maritime transport domain: the role and challenges of IMO and its stakeholders through a grounded theory perspective

In September 2015, the United Nations (UN) officially adopted the 2030 Agenda for Sustainable Development together with 17 sustainable development goals (SDGs) (UN, 2016). The attainment of the SDGs requires a strong commitment by all UN Member States, not least by the Member States at the International Maritime Organization (IMO). This empirical research aims to identify the role and challenges of stakeholders at IMO, when implementing the UN’s 2030 Agenda in the international maritime transport domain using a grounded theory approach. This paper describes the methodology and the analytical process undertaken and presents the main findings based on empirical data. The results are presented as a set of six propositions. The first proposition presents the phenomena engulfing Member States at IMO stemming out from lack of knowledge and policy incoherency on the 2030 Agenda at national level. The other five propositions suggest how these challenges could potentially be best alleviated through an IMO-led strategy on sustainable development within the context of the 2030 Agenda, supported by an appropriate governance structure that sees the introduction of strategic actors for coordinating the implementation of the SDGs at national level. With the support of a Task Force, and by also making use of the IMO Member State Audit Scheme (IMSAS), to create more awareness and ownership, the strategic actors could work towards balancing the three dimensions of sustainable development—the economic, the environmental, and the social dimensions—which were found to be imbalanced in the international maritime transport domain.     

基于AutoSEA2的船舶典型动力源辐射噪声分析

利用以统计能量分析原理为基础的声仿真软件AutoSEA2建立典型动力源激励的某船分段3D模型,分析了动力源激励力的等效计算及此激励产生的辐射噪声.首先根据舱段的特点,划分子系统并建立耦合关系,得到了统计能量分析模型.然后利用动力设备基座的面导纳概念,将基座面板分别简化为有限简支矩形薄板和无限大薄板,计算并对比了在中高频段这两种简化方案下的激励力.根据确定的激励方案计算得到r该舱段的舱室噪声和水下辐射噪声,并与试验结果进行了比较.对比表明,依此激励计算得到的声振环境预示结果与试验结果吻合较好,证明了统计能量分析在高频区预示船舶声振环境的可靠性.     

Application of the VOF method based on unstructured quadrilateral mesh

To simulate two-dimensional free-surface flows with complex boundaries directly and accurately, a novel VOF (Volume-of-fluid) method based on unstructured quadrilateral mesh is presented. Without introducing any complicated boundary treatment or artificial diffusion, this method treated curved boundaries directly by utilizing the inherent merit of unstructured mesh in fitting curves. The PLIC (Piecewise Linear Interface Calculation) method was adopted to obtain a second-order accurate linearized reconstruction approximation and the MLER (Modified Lagrangian-Eulerian Re-map) method was introduced to advect fluid volumes on unstructured mesh. Moreover, an analytical relation for the interface’s line constant vs. the volume clipped by the interface was developed so as to improve the method’s efficiency. To validate this method, a comprehensive series of large straining advection tests were performed. Numerical results provide convincing evidences for the method’s high volume conservative accuracy and second-order shape error convergence rate. Also, a dramatic improvement on computational accuracy over its unstructured triangular mesh counterpart is checked.