Aeronumeric optimal design of a wing-in-ground-effect craft

An optimization technique was used to generate a wing-in-ground-effect (WIG) configuration which can achieve the maximum lift and satisfy the height stability criteria within the design constraints. For the analysis of the aerodynamic coefficients, the vortex lattice method (VLM) was applied with the inviscid and potential flow approximations. The sequential quadratic programming (SQP) method, which is a nonlinear optimization method, was employed as an optimization tool. The lift and moment coefficients, including the stability analysis computed by VLM, were compared with the experimental results of a medium-sized WIG, and a good correlation was found between them. In addition, the optimization tool was validated by finding the optimal position of the side wing attached on the WIG craft. Then, various optimum examples are shown, with generation of the wing section, the determination of the planform configuration, the aspect ratio, and the position of the tail wing within the design constraints. It was shown that the present optimization tool can be used effectively for the optimal design of a WIG craft.     

Comparison between a reanalyzed product by 3-dimensional variational assimilation technique and observations in the Ulleung Basin of the East/Japan Sea

Reanalyzed products from a MOM3-based East Sea Regional Ocean Model with a 3-dimentional variational data assimilation module (DA-ESROM), have been compared with the observed hydrographic and current datasets in the Ulleung Basin (UB) of the East/Japan Sea (EJS). Satellite-borne sea surface temperature and sea surface height data, and in-situ temperature profiles have been assimilated into the DA-ESROM. The performance of the DA-ESROM appears to be efficient enough to be used in an operational ocean forecast system.Comparing with the results from Mitchell et al. [Mitchell, D. A., Watts, D. R., Wimbush, M., Teague, W.J., Tracey, K. L., Book, J. W., Chang, K.-I., Suk, M.-S., Yoon, J.-H., 2005a. Upper circulation patterns in the Ulleung Basin. Deep-Sea Res. II, 52, 1617-1638.], the DA-ESROM fairly well simulates the high variability of the Ulleung Warm Eddy and Dok Cold Eddy as well as the branching of the Tsushima Warm Current in the UB. The overall root-mean-square error between 100 m temperature field reproduced by the DA-ESROM and the observed 100-dbar temperature field is 2.1 °C, and the spatially averaged grid-to-grid correlation between the two temperature fields is high with a mean value of 0.79 for the inter-comparison period.The DA-ESROM reproduces the development of strong southward North Korean Cold Current (NKCC) in summer consistent with the observational results, which is thought to be an improvement of the previous numerical models in the EJS. The reanalyzed products show that the NKCC is about 35 km wide, and flows southward along the Korean coast from spring to summer with maximum monthly mean volume transport of about 0.8 Sv in August–September.     

Calibration of a transit route choice model using revealed population data of smartcard in a multimodal transit network

Transportation - One of the major objectives of this study is to provide more realistic and accurate results related to transit passenger’s route choice behavior by using population data of...     

Use of 3D compartment model for simplified full ship FE model. Part I: construction of FE model

Classification societies cannot cover the torsional strength assessment with simple empirical formula as the size of a containership increases drastically over 10 000 TEU in recent years. Torsional strength of a container ship is very difficult to estimate with an analytical method due to its alternatively varying cross sections, i. e. an open and a closed section. This article proposes an approach to construct a simplified FE model using a 3D compartment model available from the beginning of ship design process. The model is cut to pieces of lots of small pieces of lines by a set of transverse, longitudinal and horizontal planes. Two algorithms are developed for mesh generation of internal structures; one for assembling the broken lines into closed loops and the other for automatically generating mesh from the loops. Another algorithm is proposed to generate mesh for outer hull using outermost nodes of the FE model built for internal members. The validity of the simplified model is discussed along with a beam theory based approach in J Mar Sci Technol (2008)     

Characteristics of VIV in multi-degree-of-freedom tensioned beams using a numerical method

The object of this study is to analyze the characteristics of vortex-induced vibration of a slender marine structure with the numerical method. Applying a dynamic analysis method for a slender marine structure based on the 3D finite difference method, we carried out case studies for a tensioned beam model at a constant flow speed. The hydrodynamic forces, in the direction of inline and cross-flow, created by vortex shedding are simultaneously considered based on Morison equation. The frequency of force in the inline direction corresponding to the unstable zone is evaluated. An eigenvalue analysis for different flow speeds of a tensioned beam considering the effect of the tension increase due to the inline and cross-flow drag forces is performed. We found that a revision of the eigenvalue should be considered if the tension along a riser or beam is significantly affected by an environmental or functional load. From a trajectory on the XY plane it was shown that the riser did not move in an exact 8 shape for all flow conditions due to the phase angle difference between inline and cross-flow displacement. It is believed that the phase angles between inline and cross-flow displacements in high modes are different among the nodes.     

Enhanced selective forwarding scheme for alert message propagation in vehicular <Emphasis Type="Italic">ad hoc</Emphasis> networks

Vehicle-based applications were recently introduced to improve traffic safety and efficiency. These applications are classified into either safety-oriented or non-safety-oriented applications. Safety-oriented applications are typically provided by means of vehicle-to-vehicle (V2V) communications to support reliable and fast alert message propagation to all surrounding vehicles when an emergency occurs on the road. In vehicular ad-hoc network (VANET) broadcast-based packet forwarding is typically preferred for the propagation of urgent traffic-related information to all reachable nodes within a specified dangerous region. However, this approach may cause broadcast storm problems, which can lead to serious contention between transmissions from adjacent nodes. In this paper, we propose an alert message propagation scheme that is based on selective forwarding and aims to i) minimize the number of rebroadcasting nodes and ii) guarantee reliable and fast alert message delivery to all reachable nodes. Our scheme was evaluated using two different highway scenarios. The simulation results demonstrated that the performance of the proposed scheme was better than that of existing broadcast schemes in terms of the message delivery latency, the message delivery ratio, and the message rebroadcasting ratio.     

Comparison of driving characteristics between drivers in Korea and in the united states of America based on driver-vehicle interaction field database

Research and development involving intelligent vehicles of today is geared to safe, driver-friendly and sensitive vehicles that provide a driver with a pleasant and convenient driving environment while preventing him or her from possible risks of accident. In developing convenient and safe vehicles, research on drivers’ driving patterns, reactions and state characteristics depending on road conditions in actual field is essential in order to devise more driver-friendly intelligent vehicles. This paper describes how a driver-vehicle interaction (DVI) field database is built in order to obtain a driver’s input in normal road driving condition on highways, country roads, and city roads, and his or her state information, as well as data on the vehicle and traffic conditions. And the newly built database is compared with the RDCW FOT database established by UMTRI of the US for analysis to suggest that the driving tendencies of drivers in Korea and the road driving conditions are not the same as those in the US, reconfirming the need to establish a DVI field database, which will be used for the development of intelligent vehicles suitable for the Korean environment. The DVI data collected from actual driving in field are anticipated to be widely utilized as basic data for research on various intelligent driving safety systems, advanced driver assistance systems (ADAS) and human-vehicle interface (HVI) that are suitable for the driving environment in Korea.     

Network performance analysis and manuever model for overtaking assistant service using wave

We present network requirements for an overtaking assistant service using wireless access in vehicular environment (WAVE). Currently, DNPW has been proposed as a representative overtaking assistant service with vehicle-tovehicle (V2V) communication. In order to analyze its network performance, we construct a maneuver model for an overtaking system. According to this model, we configured a scenario for network simulation based on the 802.11p WAVE standard. The results confirm that a radio range for overtaking needs only a single hop without routing methods. Moreover, we propose an additional safe distance for the communication delay generated by an increase in the numbers of neighboring vehicles. And for high priority activity of safety services, we present a proper access category (AC) of enhanced distributed channel access (EDCA). These analysis results should be tested considered in real safety service systems that use V2V communication.     

GROWTH DIFFERENTIATION FACTOR-5 STIMULATES THE GROWTH AND ANABOLIC METABOLISM OF ARTICULAR CHONDROCYTES

Growthdifferentiationfactor5(GDF5),also knownascartilage derivedmorphogeneticprotein1(CDMP1),isamemberofthebonemorphogenet icprotein(BMP)familywhichbelongstothe transforminggrowthfactorβ(TGFβ)superfami ly[1].GDF5isarelativelynewmemberofthe BMPfamily.LikeotherBMPs,implantationofre combinantGDF5caninduceectopiccartilagefor mationinmusculartissues.Thephysiologicalrole ofGDF5hasbeenreportedincludingregulationof myogenesis,regulationofchondrogenesis,bone morphogenesis,andneurondifferen…     

Optimization of blending oil with non-esterified biodiesel fuel using design of experiment at partial engine loads

Non-esterified bio-diesel fuel is more economically feasible than esterified one because of simple manufacturing process that only consists of filtering. Applicability of this fuel on diesel engine with electronic control system was tried and accomplished in a previous research. In this study, optimization adopting a fractional factorial design and response surface methodology was carried out at 25 % and 50 % of engine load in order to verify effectiveness of design of experiment for performance optimization of diesel engine. Pcr and IT mainly affected responses as specific fuel oil consumption and nitrogen oxides regardless of engine load according to the fractional factorial design. Estimations were 310.3 g/kWh of specific fuel oil consumption and 237 ppm of nitrogen oxides at 25 % load, and 233.2 g/kWh of specific fuel oil consumption and 730 ppm of nitrogen oxides at 50 % load according to the response surface methodology. As the results of verification tests, specific fuel oil consumption and NOx were respectively 300.4 g/kWh and 277 ppm at 25 % load, and 236.8 g/kWh and 573 ppm at 50 % load. Since there were small differences between estimations and verifications, adopting Box-Behnken method of the response surface methodology for performance optimization of diesel engine should be considered carefully.