A model‐based demand‐balancing control for dynamically divided multiple urban subnetworks

Traffic control is an effective and efficient method for the problem of traffic congestion. It is necessary to design a high‐level controller to regulate the network traffic demands, because traffic congestion is not only caused by the improper management of the traffic network but also to a great extent caused by excessive network traffic demands. Therefore, we design a demand‐balance model predictive controller based on the macroscopic fundamental diagram‐based multi‐subnetwork model, which can optimize the network traffic mobility and the network traffic throughput by regulating the input traffic flows of the subnetworks. Because the transferring traffic flows among subnetworks are indirectly controlled and coordinated by the demand‐balance model predictive controller, the subnetwork division can variate dynamically according to real traffic states, and a global optimality can be achieved for the entire traffic network. The simulation results show the effectiveness of the proposed controller in improving the network traffic throughput. Copyright © 2016 John Wiley & Sons, Ltd.     

Evaluating critical lines and stations considering the impact of the consequence using transit assignment model ‐case study of London's underground network

As the problem of full transit vehicles is encountered daily by passengers in most of the big cities, previous research evaluated the consequence of overcrowding in terms of on‐board crowding and passengers not being able to board with full vehicles. The impact of overcrowding in the real world is, however, not necessarily proportional to these numbers. This paper attempts to specify the critical lines and stations of a network by considering the number of passengers failing to board and attempting to evaluate its impact on service quality and safety risks. The hypothesis is that larger stations with wider platforms can often cope better with overcrowding than smaller stations. Therefore a station size dependent satisfaction function is proposed, which takes values from 0 to 1. The method is applied to London's underground network with a number of scenarios which show critical stations in the network if delays occur.     

Modeling the evolutions of day‐to‐day route choice and year‐to‐year ATIS adoption with stochastic user equilibrium

Suppose that in an urban transportation network there is a specific advanced traveler information system (ATIS) which acts for reducing the drivers' travel time uncertainty through provision of pre‐trip route information. Because of the imperfect information provided, some travelers are not in compliance with the ATIS advice although equipped with the device. We thus divide all travelers into three groups, one group unequipped with ATIS, another group equipped and in compliance with ATIS advice and the third group equipped but without compliance with the advice. Each traveler makes route choice in a logit‐based manner and a stochastic user equilibrium with multiple user classes is reached for every day. In this paper, we propose a model to investigate the evolutions of daily path travel time, daily ATIS compliance rate and yearly ATIS adoption, in which the equilibrium for every day's route choice is kept. The stability of the evolution model is initially analyzed. Numerical results obtained from a test network are presented for demonstrating the model's ability in depicting the day‐to‐day and year‐to‐year evolutions.     

微观仿真在城市停车设施规划中的应用

为研究停车场规划和可达性对城市路网的影响,在世界范围内的三个不同城市应用微观仿真模型模拟停车设施规划。描述了三个城市采用的不同研究方法及得到的研究结果。三项研究都试图找到由驾驶人寻找停车位而造成的城市交通拥堵的解决方法。同时,在测试设计方案时,都使用了S-Paramics微观仿真模型。     

A method for measuring accurate traffic density by aerial photography

Traffic density can be accurately measured by counting the number of vehicles within 1 km; however, it is often calculated between macroscopic traffic parameters using the fundamental equation because of difficulty of observing traffic density directly in the field. Measuring density in this way may be inaccurate and may bias the analysis because the relationship between these traffic parameters can vary across the study sites. The purpose of this study is to find a method for measuring traffic density from aerial photography that is easy and accurate, and for this purpose, we investigated whether the measuring length (i.e., the length of a section of roadway from which observations of traffic are simultaneously collected) can be shorter than 1 km and yet retain the same measured traffic density. We divided an aerial photograph into several 20‐m unit sections, counted the number of vehicles manually, and examined measured traffic density according to central limit theory. According to the results of this study, with the number of 20‐m unit sections for observing traffic density at 15 (the measuring length is 300 m), the measured traffic density was almost the same as the density of a representative section of 1 km. Copyright © 2014 John Wiley & Sons, Ltd.     

Crosswind‐based optimization of multiple runway orientations

The runway orientation must satisfy the operational requirements of aircraft for landing and takeoff. Actually, the runway orientation is the result of compromises between the airport usability (wind coverage) and additional factors, such as available land, existing obstructions, topographic difficulties, flight path interference among runways and airports, noise pollution, and other environmental impacts. Therefore, the solution of a combination of acceptable runway orientations, which avoids excessive crosswinds at least 95% of the time, as well as the optimal orientation solution, is essential to conduct those compromises in the runway orientation analysis. The objective of this paper is to develop a computer model, named the optimization of multiple runway orientations model, which is capable of simultaneously providing a combination of acceptable runway orientations, changing the allowable crosswind limit flexibly, and determining the optimal orientations of multiple runway configurations. Instead of visual estimation or geometric computation, this paper presents an analytical method for wind coverage analysis. The model is mainly running in spreadsheet and Visual Basic for Applications (VBA). The numerical example and comparison show that the optimization of multiple runway orientations model is competitively accurate and convenient in comparison with previous ones. This paper presents an up‐to‐date model for the optimization of multiple runway orientations. By combining it with the geographic information system obstructions model, it can become an essential element of a future model for airport development cost minimization that combines airfield land use, earthwork volume, and cost estimation modules. Copyright © 2013 John Wiley & Sons, Ltd.     

The development of taiwan arterial traffic‐adaptive signal control system and its field test: A taiwan experience

This Taiwan traffic‐adaptive arterial signal control model borrowed its traffic flow framework mainly from a British traffic‐adaptive control model with a cyclic traffic progression function, i.e. SCOOT (Split Cycle Office Optimisation Technique). The new arterial control model can take into account delays of both major and minor streets and make real‐time signal timing decisions with optimal two‐way signal offsets, so as to create the best arterial signal operation performance. It has been developed to be an online real‐time software for both simulation testing and field validation. Through simulation, it was found that the performance when operating this newly developed real‐time arterial traffic‐adaptive model was significantly better than when using the optimal fixed‐time arterial timing plan. On the aspect of field testing, three signalized intersections located in East District, Tainan City, Taiwan were selected to be the test sites. Fairly good traffic control performance has been demonstrated in that it can effectively reduce travel delays of the control arterial as a whole. Additional discussions about how to combine travel delay and the total number of vehicle stops into a new control performance index have also been included to make the new traffic‐adaptive model more flexible and reasonable to meet the expectations of different driver groups in the arterial system.     

A column generation algorithm for the bus driver scheduling problem

Bus driver scheduling aims to find the minimum number of bus drivers to cover a published timetable of a bus company. When scheduling bus drivers, contractual working rules must be enforced, thus complicating the problem. In this research, we develop a column generation algorithm that decomposes this complicated problem into a master problem and a series of pricing subproblems. The master problem selects optimal duties from a set of known feasible duties, and the pricing subproblem augments the feasible duty set to improve the solution obtained in the master problem. The proposed algorithm is empirically applied to the realistic problems of several bus companies. The numerical results show that the proposed column generation algorithm can solve real‐world problems and obtain bus driver schedules that are better than those developed and used by the bus companies. Copyright © 2016 John Wiley & Sons, Ltd.     

Valuation of users’ benefits in transport systems

Transport projects involve costs and benefits. Benefits to users appear in the form of more and/or better trips. Once the neoclassical idea of demand is accepted, the variation of utility levels underlie the measurement of benefits. In the evaluation process, benefits have to be compared with costs, and this can be done converting utility into monetary units. This paper deals with the treatment of this problem, starting with the general relation among utility, demand and the various forms of consumers’ surplus, to move further into the particular forms that these relations take in the transport field. The rule‐of‐a‐half is followed from the intuitive initial justification to a strict (and general) analytical derivation. More rigorous forms of users’ surplus variation are then presented for fairly general cases, including both aggregate and disaggregate transport demand models, emphasizing the manner in which welfare measures are derived in each case. Discussion is centred around the comparative advantages and limitations of available approaches, searching for improvements in demand formulation and benefits measurement.