Special issue: Importance of public transport

The transport demand in most major cities around the world can only be met with a high‐quality public transport system. The requirements on bus, rail, underground and tram systems are manifold with reliability and efficiency as the key factors. The service operating hours and the size of the network are often extended in order to serve the needs better. Further, most metropolitan areas are trying to provide more incentives for citizens to leave the car at home and use the local transit systems instead. The reasons are well known. Not only does a public transport system only make economical sense if it is well used, but most urban areas with a high car‐dependency face at least three major problems; safety, congestion, and pollution (noise and air pollution, land separation, etc.). It is generally recognised that to decrease car usage and to increase public transport usage a stick & carrot approach is needed. The London congestion‐charging scheme is an example since all revenues collected by the scheme are put into the improvement of bus and underground services.     

Optimization of transport investment and pricing policies: the role of transport pricing in network design

This paper investigates the role of transport pricing in network design and describes two facts about flow pattern in a transportation system. The first, illustrated by an example of Braess paradox, is that adding a new link to the network does not necessarily minimize the total travel time. The second is that introducing of appropriate toll pricing may reduce not only the total network time but also the travel time for each individual traveller. It follows with the investigations of different system objectives and different pricing policies (only toll pricing and distance‐based pricing are considered), and shows how they affect the system performance and flow pattern. Lastly, a systematic optimization process is proposed for integrated planning of transport network and pricing policies.     

Public transit subsidies, output effect and total factor productivity

This paper extends previous works on total factor productivity decomposition when firms receive both operating and capital subsidies. It shows that previous works considered either the lump-sum or substitution effects of these subsidies but not together. Using constrained cost minimization as the framework it offers formal proofs to show that cost increases are inevitable if the total effects of the subsidies are considered, and that total factor productivity growth results from increasing amounts of subsidies under economies of scale and in the absence of technical change. Applications of the decomposition equations derived to a sample of transit systems finds near constant returns to scale and negative contributions of these subsidies to total factor productivity growth. Technical change reverses this decline and results in total factor productivity growth. Further, it finds that the lump-sum effects of the subsidies reduce total factor productivity more than does the substitution effect.     

Model-based analysis of the mechanical subsystem of an air brake system

Most commercial vehicles such as buses and trucks use an air brake system, often equipped with an S-cam drum brake, to reduce their speed and/or to stop. With a drum brake system, the clearance between the brake shoe/pad and the brake drum may increase because of various reasons such as wearing of the brake shoe and/or brake drum and drum expansion caused by high heat generation during the braking process. Hence, to ensure proper functioning of the brake system, it is essential that the clearance between the brake shoe and the brake drum is monitored. In this paper, we present a mathematical model for the mechanical subsystem of the air brake system that can be used to monitor this clearance. This mathematical model correlates the push rod stroke transients and the brake chamber pressure transients. A kinematic analysis and a dynamic analysis of the mechanical subsystem of the air brake system were performed, and the results are corroborated with experimental data.     

Cycle-simulation turbulence modelling of IC engines

Numerical simulations of IC engines are of high interest for automotive engineers worldwide. The simulation models should be as fast as possible, low-computational effort and predictive tool. The correct prediction of turbulence level inside the combustion chamber of spark ignition engines is the most important factor influencing to the engine working cycle. This paper presents a development of the k-ε turbulence model applied to the commercial cycle-simulation software with the high emphasis on the intake part. The validation was performed on two engine geometries with the variation of engine speed and load comparing the cycle-simulation results of the turbulent kinetic energy and in-cylinder temperature with 3-D CFD results. In order to apply the cycle-simulation turbulence model for the simulation of entire engine map, the parameterization model of turbulence constants was proposed. The parameterized turbulence model was optimized using NLPQL optimization algorithm where the single set of turbulence model parameters for each engine was found. A good agreement of the turbulent kinetic energy during the expansion was achieved when the turbulence affects the flame front propagation and combustion rate as well.     

Review of flywheel based internal combustion engine hybrid vehicles

Hybrid vehicles of different configurations and utilizing different energy storage systems have existed in development for many decades and more recently in limited production. They can be grouped as parallel, series or complex hybrids. Another classification is micro, mild and full hybrids which makes the distinction on the basis of functionality. The common energy storage systems in hybrid vehicles are batteries, supercapacitors and high speed flywheels. This paper aims to review a specific type of hybrid vehicle which involves the internal combustion engine (ICE) as the prime mover and the high speed flywheel as an energy storage device. Such hybrids are now attracting considerable interest given their potential for low cost. It is hence timely to produce a review of research and development in this subject. The flywheel is coupled to the drive line with a continuous variable transmission (CVT). The CVT can be of various types such as electrical, hydraulic or mechanical but usually in this case it is a non-electrical one. Different configurations are possible and the paper provides a timeline of the development of such powertrains with various examples. These types of hybrid vehicles have existed as prototypes for many decades and the authors believe that their development has reached levels where they can be considered serious contenders for production vehicles.     

Influence of vehicular traffic on urban air quality – A case study of Hyderabad,India

In the present study, impact of vehicular traffic emissions on black carbon aerosol mass concentration, trace gases and ground reaching solar radiation were analyzed during nationwide truck strike of 5–12 January, 2009 over urban environment of Hyderabad, India. A significant reduction of about 57%, 60%, 40% and 50% was observed in black carbon, particulate matter, carbon monoxide and ozone respectively during nationwide truck strike period. Results of the study are important for source apportionment of pollutants as the strike created natural laboratory for studying the impact of diesel operated trucks on urban air quality.     

Development of hot stamped center pillar using form die with channel type indirect blank holder

The hot stamping process has been used in the automotive industry to reduce the weight of the body-in-white and to increase passenger safety via improved crashworthiness. However, defects such as fracture and wrinkle occur when hot stamping is performed using a conventional drawing or forming method. In this study, a channel-type indirect blank holder (CIBH) is proposed to develop a high-strength center pillar in form-type hot stamping, so that the aforementioned drawbacks are overcome. This type of blank holder plays an important role in reducing severe wrinkling at the flange; such wrinkling leads to folding after the completion of form-type hot-stamping. First, we investigated the effect of the channel shape on the indirect blank holding force by using a simplified two-dimensional plane-strain stamping process. Second, we selected the slope angle and corner radius of the channel as the main shape parameters by finite element analysis and artificial neural network (ANN). It is known that fracture at the hot formed wall and wrinkle at the flange are significantly affected by the slope angle of the channel, and the appropriate value for eliminating fracture and wrinkle is determined to be 99°. By performing hot stamping using a form die with the selected channel, we can manufacture a high-strength center pillar without wrinkle and fracture.     

Multiaxial stress creep rupture mechanisms of AZ31 magnesium alloy

The maximum principal stresses, von Mises effective stresses and principal facet stresses at the time of creep rupture were compared in uniaxial, biaxial, and triaxial stress states for AZ31 magnesium alloy. The creep rupture of this alloy was experimentally controlled by cavitation, which was the result of a low damage tolerance, λ. Creep deformation could be correlated with the von Mises effective stress parameter. The failure-mechanism control parameter governing the stress state coincided with the experimental results of the rupture of the materials under multiaxial stress states. Finally, the theoretical prediction based on constrained cavity growth and continuous nucleation agreed with the experimental rupture data to within a factor of three.     

Condition monitoring of wooden railway sleepers

Wooden railway sleeper inspections in Sweden are currently performed manually by a human operator; such inspections are to large extent based on visual analysis. In this paper a machine vision based approach has been considered to emulate the visual abilities of the human operator to enable automation of the process. Digital images from either ends (left and right) of the sleepers have been acquired. A pattern recognition approach has been adopted to classify the condition of the sleeper into classes (good or bad) and thereby achieve automation. Appropriate image analysis techniques were applied and relevant features such as the number of cracks on a sleeper, average length and width of the crack and the condition of the metal plate were determined. Feature fusion has been proposed in order to integrate the features obtained from each end for the classification task which follows. The effect of using classifiers like multi-layer perceptron and support vector machines has been tested and compared. Results obtained from the experiments show that multi-layer perceptron and support vector machines have achieved encouraging results, with a classification accuracy of 90%; thereby exhibiting a competitive performance when compared to a human operator.