再生性原料在汽车上的应用

本文以联邦德国农业及经济状况为出发点，介绍了利用生物制品，主要是粮食，油料等农产品转化为发动机燃料的研究工作情况，并重点介绍了用菜籽油和酒精的试验研究情况。     

Effect of Traction Force Distribution Control on Vehicle Dynamics

The purpose of this study is to clarify vehicle dynamics effected by traction force distribution, not only between the front and rear wheels but also between the left and right wheels. Contribution of traction force distribution to vehicle turning performance was investigated using a mathematical simulation and an experimental vehicle. The results indicates that the control of traction control distribution between the left and right wheels greatly influences vehicle turning characteristics and improve the performance even in a marginal turning condition.     

Vehicle Motion Analysis in Relation to Vehicle Safety

The influence of vehicle handling on the possible avoidance of accident situations is discussed. lit is shown that accident reconstruction at present does not provide the necessary information to relate the cause of accidents to the lack of road worthiness of vehicles. It follows that the vehicle behavior in proximity of its performance limit must be determined in order to infer its accident avoidance potential.

The paper presents a review of the state-of-the-art of vehicle modeling, simulation of vehicle maneuvers and full scale testing. The application of the direct method of the stability theory is suggested as a possible means of obtaining performance limit envelopes which are necessary for establishing standards of the performance of vehicles.     

Roll Dynamics of Commercial Vehicles

An analytical model is developed here for studying the roll dynamics of commercial vehicles. Large displacements and rotations are accounted for in this nonlinear model so that it can be used for the study of roll dynamics well beyond the limits of wheel lift-off. The model is used to illustrate some of the dynamic phenomena in vehicle rollover, especially the interactive coupling between the roll and the vertical modes of motion. The influence of suspension backlash on rollover resistance is demonstrated, and the phenomenon of roll motion resonance is illustrated to suggest new means for evaluating vehicle rollover sensitivity.     

Application of a modified thermostatic control strategy to parallel mild HEV for improving fuel economy in urban driving conditions

A modified thermostatic control strategy is applied to the powertrain control of a parallel mild hybrid electric vehicle (HEV) to improve fuel economy. This strategy can improve the fuel economy of a parallel mild HEV by operating internal combustion engine (ICE) in a high-efficiency region. Thus, in this study, experiments of a parallel mild HEV were conducted to analyze the characteristics of the hybrid electric powertrain and a numerical model is developed for the vehicle. Based on the results, the thermostatic control strategy was modified and applied to the vehicle model. Also, battery protection logic by using electrochemical battery model is applied because the active usage of battery by thermostatic control strategy can damage the battery. The simulation results of the vehicle under urban driving conditions show that the thermostatic control strategy can improve the vehicle’s fuel economy by 3.7 % compared with that of the conventional strategy. The results also suggest that the trade-off between the fuel economy improvement by efficient ICE operation and the battery life reduction by active battery usage should be carefully investigated when a thermostatic control strategy is applied to a parallel mild HEV.     

Flamelet combustion model for stratified EGR distribution in a diesel engine

Numerous research has been devoted to finding a method to simultaneously reduce NOx and soot emissions from diesel engines. In-cylinder EGR stratification is a technique that simultaneously reduces NOx and soot using a nonuniform EGR distribution in the combustion chamber. To study the potential of in-cylinder EGR stratification, a new combustion model is required that considers the non-uniform EGR distribution and the chemical kinetics. In this study, a new combustion model, the Flamelet for Stratified EGR (FSE) model, was developed to consider the non-uniform in-cylinder gas distribution based on chemical kinetics. The concept of the FSE model is based on using multiple flamelets with the multizone concept. To describe the non-uniform gas distribution, the combustion chamber is divided into several zones by oxygen concentration at the start of injection. Then, the flamelet equations are solved at the boundary of each zone. The final species mass fraction of each cell is calculated using linear interpolation between two results from the boundaries. In this paper, the FSE model was validated under in-cylinder EGR stratification conditions, and then, the potential of in-cylinder EGR stratification was studied by using the FSE model. The effect of in-cylinder EGR stratification was verified under various injection timing, engine speed, and road conditions with optimized engine geometries. The results shows simultaneous NOx and soot reductions under the stratified EGR condition.     

生物法处理生活污水脱氮除磷效果分析

通过对铁道部无锡干部培训基地（以下简称培训基地）的生活污水的生物法处理效果观察，探析兼氧／好氧生物处理系统的脱氮除磷原理并对影响处理效果因素进行分析。     

Multiaxial stress creep rupture mechanisms of AZ31 magnesium alloy

The maximum principal stresses, von Mises effective stresses and principal facet stresses at the time of creep rupture were compared in uniaxial, biaxial, and triaxial stress states for AZ31 magnesium alloy. The creep rupture of this alloy was experimentally controlled by cavitation, which was the result of a low damage tolerance, λ. Creep deformation could be correlated with the von Mises effective stress parameter. The failure-mechanism control parameter governing the stress state coincided with the experimental results of the rupture of the materials under multiaxial stress states. Finally, the theoretical prediction based on constrained cavity growth and continuous nucleation agreed with the experimental rupture data to within a factor of three.