排气系统热管理及装置开发研究

阐述了排气系统热管理的必要性和实施办法.设计一种EGTC装置,用于实现排气温度的瞬时可控,对实现排气温度热管理具有重要作用.     

Computer-Simulation of the Dynamical Curving Behaviour of a Railway-Bogie

This paper describes the modelling of a two axle railway-bogie with variable design configurations and its application in the investigation of the behaviour in transitional and circular curves. Several results indicate possibilities to improve the curving properties and recommend the usage of forced-steering bogies, which show better performance in narrow curves without unbearable sacrifices to high-speed-behaviour on straight track.     

汽车接近角,离去角和纵向通过角的测量

介绍了日本汽车标准化协会（JASO）对汽车接近角、离去角和纵向通过角的定义。按照该定义，可以用简单的测量工具测得若干个长度尺寸，然后代入按几何关系推导出的公式中求得上述三个角度的精确值，既提高了测量精度，又便于各车型之间这些参数的比较。     

键合图理论在汽车纵向角振动主动控制中的应用

本文应用键合图理论建立了汽车5自由度振动系统的键图模型并推导出状态方程，以垂直振动、纵向角振动能量最小和控制能量最小为目标函数，利用状态反馈原理代化出前悬架减振器的最佳控制力，对汽车驶过三角形单凸起时的振动响应进行了计算机仿真分析。结果表明，具有主动控制悬架的汽车，其纵向角振动得到明显的衰减。     

驾驶员动视力对交通安全的影响及检测系统的研究

本文就驾驶员动视力的好坏对行车安全的影响进行了探讨,重点分析了驾驶员事故群与无事故群动视力的差异的显著性,论述了检测驾驶员动视力的必要性。同时介绍了动视力检测仪的检测原理、仪器的结构及检测方法。该仪器可以自动地对各类人员进行动视力、动静视力和静视力的检测。     

多刚体系统动力学在汽车转向和悬架系统运动分析中的应用

多刚体系统动力学是近２０年发展起来的力学新分支。本文以该领域中的Ｒ－Ｗ方法为理论基础，编制了可自动建模半进行计算机值仿真计算的汽车转向，悬架运动分析通用程度，运用该程度对大量的实车进行了计算分析，经整车和转向悬架系统的试验结果表明，用该程序进行汽车转向，悬架运动分析，所得结果准确，计算迅速，可方便地进行转向，悬架设计方案的比较和参数的选择。     

Analysis of Driver's Decelerating Strategy in a Car-following Situation

This report describes a decelerating driver-model expressed by driving mode transition in car-following situations. The assumptions for constructing the model are that decelerating strategy of a driver is classified into several simple driving modes and that a driver changs his driving modes based on his perceptible characteristics and experiential rules. Deceleration action is divided into three states; following, standing and braking, which are applied to the model. The model has two paths for driver's decelerating action, one of which is selected by the driver based on the perceptible characteristics and experiential rules. The suitability of the model has been experimentally verified.     

Effect of Connecting the Front and Rear Air Suspensions of a Vehicle on the Transmissibility of Road Undulation Inputs

Airsprings have been used for vehicle suspensions over the last 40 years. They are mostly used as independent suspensions. Analysis of air springs available in literature is mostly limited to a single-degree-of-freedom system or a two-degrees-of-freedom system only in the translation mode. This paper deals with a model of a vehicle where the front and the rear springs are connected by a capillary tube. A two-degrees-of-freedom model having motion in bounce and pitch mode is presented. Equations of mass flow are linearized on the assumption of small variations in volume and pressure. Expressions for the transmissibility and the phase angle in the bounce and the pitch mode are derived. Road inputs to the front and the rear axles are assumed to be identical except for a phase difference between them. The effect of the capillary flow coefficient and that of the phase angle between the front and the rear axle excitation are studied. It is shown that an optimum value of the capillary flow coefficient exists which minimizes the transmissibility of motion in both modes over the entire frequency range. It is also observed that a phase angle of 180 degrees presents ideal transmissibility characteristics. Thus, a promising application of air springs for a vehicle suspension is presented.