Certificateless message recovery signatures providing girault’s level-3 security

A digital signature with message recovery is a signature that the message itself (or partial of the message) is not required to be transmitted together with the signature. It has the advantage of small data size of communication comparing with the traditional digital signatures. In this paper, combining both advantages of the message recovery signatures and the certificateless cryptography, we propose the first certificatelss signature scheme with message recovery. The remarkable feature of our scheme is that it can achieve Girault’s Level-3 security while the conventional certificateless signature scheme only achieves Level-2 security. The security of the scheme is rigorously proved in the random oracle model based on the hardness of the k bilinear Diffie-Hellman inverse (k-BDHI) problem.     

On the degradation of performance for traffic networks with oblivious users

We consider the problem of characterizing user equilibria and optimal solutions for routing in a given network. We extend the known models by considering users oblivious to congestion in the following sense: While in the typical user equilibrium setting the users follow a strategy that minimizes their individual cost by taking into account the (dynamic) congestion due to the current routing pattern, an oblivious user ignores congestion altogether; instead, he or she decides his routing on the basis of cheapest routes on a network without any flow whatsoever. These cheapest routes can be, for example, the shortest paths in the network without any flow. This model tries to capture the fact that a certain percentage of travelers base their route simply on the distances they observe on a map, without thinking (or knowing, or caring) about the delays experienced on this route due to their fellow travelers. In this work we study the effect of such users using as the measure of network performance its price of anarchy, i.e., the ratio of the total latency experienced by the users (oblivious or not) at equilibrium over the social optimum.     

A new efficient EDI system for container cargo logistics

There have been many efforts to develop a logistics information system in the Korean logistics industry. In spite of these efforts, there are many points which need improvement in the Logistics Information System, of which function is the electronic data communication without added value. This paper aims to describe some of the main problems and the successful factors which are being found in the evolution of the present EDI systems for clearing import/export container cargoes, with special reference to Singapore, Korea, and Japan. Following this, leaving legal issues aside, to suggest workable guidelines for designing a new efficient EDI system for container cargo logistics. As a result of the review, the following successful factors are drawn: (a) the planning, requirement analysis and design of EDI are critical, as it provides a framework for its implementation; (b) as the data of customs clearance are an integral part of a logistics EDI system, the inclusion of customs in the system design is essential; (c) the sharing system of cargo data as the framework of the logistics EDI is efficient for data interchange; (d) the EDI software for the user has been developed and provided by an EDI network operating company; and (e) to facilitate communication between trading partners and the transport sector, it is necessary to adopt a global message standard, such as EDIFACT.     

转向和悬架系统的检修

不论汽车的转向和悬架中的部件使用什么材料，在摩擦力和汽车重力的作用下，这些部件都会产生不同程度的磨损。当磨损达到一定程度后，就会导致汽车的转向和悬架性能的显著下降。[编者按]     

Advanced Control Methods for Automotive Applications

This paper reviews key developments in applications of advanced control methods to automotive systems. Such applications appear in many aspects of vehicle controls. We will examine representative application areas, which include engines, suspension systems, traction systems, steering systems and those for automated highway systems (AHS). Each area is examined from the viewpoint of modeling and control algorithm development. Useful control theories for automotive application are briefly reviewed for better understanding of the applicability of these theories.     

Optimum design of tilting bogie frame in consideration of fatigue strength and weight

This paper addresses the use of finite-element (FE) analysis to calculate the fatigue strength of a bogie frame, for the development of tilting trains in Korea. A multi-body dynamic analysis was performed to extract the load condition by tilting on curves. Using the results of the multi-body dynamic analysis and the load scenario setout in the UIC standard, FE analysis was performed to obtain the stress distribution and to calculate the fatigue strength. An attempt was made to minimize the weight of the bogie frame using a back-propagation artificial neural network (ANN). The results of this study reveal that the stresses at some nodes are near the fatigue limit in the Goodman diagram and by using back-propagation ANN, the weight of the bogie frame could be reduced by 4.7%.     

Global cutting-path optimization considering the minimum heat effect with microgenetic algorithms

This article considers microgenetic algorithms (GAs), which explore in a small population with a few genetic operators, for cutting-path optimization problems. The major difference between GAs and simple genetic algorithms (SGAs) is how to make a reproductive plan for an improved searching technique because of population choice. It is shown that GAs implementation reaches the near-optimal region much earlier than the SGAs approach, and the GAs give a better solution than simulated annealing (SA). The main objective was to determine what temperature distribution can be obtained from the solution of a travelling distributed heat source. The solution of the travelling heat source on nested raw plate provides information about the vertices of each nested part of the raw plate. From the fact that the initial temperature at a piercing point strongly depends on the heat flow which stems from the previous cutting contour, the temperature of all piercing points must be lower than the critical temperature after each cutting of the components of a part. The critical temperature is identified as the mechanical melting temperature of steels. A heuristic back-tracking method is introduced to find the near-optimum cutting path considering the minimum heat effect on deformation. The heuristic back-tracking method is incorporated with the GAs.     

A tyre slip-based integrated chassis control of front/rear traction distribution and four-wheel independent brake from moderate driving to limit handling

This paper presents a tyre slip-based integrated chassis control of front/rear traction distribution and four-wheel braking for enhanced performance from moderate driving to limit handling. The proposed algorithm adopted hierarchical structure: supervisor – desired motion tracking controller – optimisation-based control allocation. In the supervisor, by considering transient cornering characteristics, desired vehicle motion is calculated. In the desired motion tracking controller, in order to track desired vehicle motion, virtual control input is determined in the manner of sliding mode control. In the control allocation, virtual control input is allocated to minimise cost function. The cost function consists of two major parts. First part is a slip-based tyre friction utilisation quantification, which does not need a tyre force estimation. Second part is an allocation guideline, which guides optimally allocated inputs to predefined solution. The proposed algorithm has been investigated via simulation from moderate driving to limit handling scenario. Compared to Base and direct yaw moment control system, the proposed algorithm can effectively reduce tyre dissipation energy in the moderate driving situation. Moreover, the proposed algorithm enhances limit handling performance compared to Base and direct yaw moment control system. In addition to comparison with Base and direct yaw moment control, comparison the proposed algorithm with the control algorithm based on the known tyre force information has been conducted. The results show that the performance of the proposed algorithm is similar with that of the control algorithm with the known tyre force information.     

Development of hot stamped center pillar using form die with channel type indirect blank holder

The hot stamping process has been used in the automotive industry to reduce the weight of the body-in-white and to increase passenger safety via improved crashworthiness. However, defects such as fracture and wrinkle occur when hot stamping is performed using a conventional drawing or forming method. In this study, a channel-type indirect blank holder (CIBH) is proposed to develop a high-strength center pillar in form-type hot stamping, so that the aforementioned drawbacks are overcome. This type of blank holder plays an important role in reducing severe wrinkling at the flange; such wrinkling leads to folding after the completion of form-type hot-stamping. First, we investigated the effect of the channel shape on the indirect blank holding force by using a simplified two-dimensional plane-strain stamping process. Second, we selected the slope angle and corner radius of the channel as the main shape parameters by finite element analysis and artificial neural network (ANN). It is known that fracture at the hot formed wall and wrinkle at the flange are significantly affected by the slope angle of the channel, and the appropriate value for eliminating fracture and wrinkle is determined to be 99°. By performing hot stamping using a form die with the selected channel, we can manufacture a high-strength center pillar without wrinkle and fracture.     

Multiaxial stress creep rupture mechanisms of AZ31 magnesium alloy

The maximum principal stresses, von Mises effective stresses and principal facet stresses at the time of creep rupture were compared in uniaxial, biaxial, and triaxial stress states for AZ31 magnesium alloy. The creep rupture of this alloy was experimentally controlled by cavitation, which was the result of a low damage tolerance, λ. Creep deformation could be correlated with the von Mises effective stress parameter. The failure-mechanism control parameter governing the stress state coincided with the experimental results of the rupture of the materials under multiaxial stress states. Finally, the theoretical prediction based on constrained cavity growth and continuous nucleation agreed with the experimental rupture data to within a factor of three.