Estimating the trip generation impacts of autonomous vehicles on car travel in Victoria,Australia

Autonomous vehicles (AVs) potentially increase vehicle travel by reducing travel and parking costs and by providing improved mobility to those who are too young to drive or older people. The increase in vehicle travel could be generated by both trip diversion from other modes and entirely new trips. Existing studies however tend to overlook AVs’ impacts on entirely new trips. There is a need to develop a methodology for estimating possible impacts of AVs on entirely new trips across all age groups. This paper explores the impacts of AVs on car trips using a case study of Victoria, Australia. A new methodology for estimating entirely new trips associated with AVs is proposed by measuring gaps in travel need at different life stages. Results show that AVs would increase daily trips by 4.14% on average. The 76+ age group would have the largest increase of 18.5%, followed by the 18–24 age group and the 12–17 age group with 14.6 and 11.1% respectively. If car occupancy remains constant in AV scenarios, entirely new trips and trip diversions from public transport and active modes would lead to a 7.31% increase in car trips. However increases in car travel are substantially magnified by reduced car occupancy rates, a trend evidenced throughout the world. Car occupancy would need to increase by at least 5.3–7.3% to keep car trips unchanged in AV scenarios.     

Internal tidal currents in the Gaoping (Kaoping) Submarine Canyon

Data from five separate field experiments during 2000–2006 were used to study the internal tidal flow patterns in the Gaoping (formerly spelled Kaoping) Submarine Canyon. The internal tides are large with maximum interface displacements of about 200 m and maximum velocities of over 100cm/s. They are characterized by a first-mode velocity and density structure with zero crossing at about 100 m depth. In the lower layer, the currents increase with increasing depth. The density interface and the along-channel velocity are approximately 90° out-of-phase, suggesting a predominant standing wave pattern. However, partial reflection is indicated as there is a consistent phase advance between sea level and density interface along the canyon axis.     

Geochemical controls on distributions and speciation of As and Hg in sediments along the Gaoping (Kaoping) Estuary–Canyon system off southwestern Taiwan

Surface and box-cored sediments were collected along the Gaoping (formerly spelled Kaoping) Estuary–Canyon system and analyzed for As and Hg contents and speciation, ²¹⁰Pb-based sedimentation rates and various geochemical parameters to elucidate the mechanisms that control natural and anthropogenic inputs of As and Hg from the Gaoping (Kaoping) River (KPR). The contents of As and Hg in surface sediments ranged from 1.84 to 20.7 mg kg^− 1 and from 0.07 to 2.15 mg kg^− 1, respectively, in the estuary and canyon. The concentrations generally decreased from the lower river toward the mixing boundary and then increased toward the estuarine mouth, followed by a slight variation in the canyon. Both As and Hg concentrations correlated strongly with clay, total organic carbon (TOC), Al, Fe and Mn contents in estuarine sediments but not necessary the same cases for canyon surface sediments. The factor analysis of surface sediments shows that the first two factors, which account for 75.6% of the variance, may represent major roles of carriers (clay, Al and Fe–Mn oxides) and TOC in controlling As and Hg distributions, respectively. Accordingly, the spatial patterns of the enrichments of As (1.9–16.2) and Hg (1.8–30.8) with reference to the crust levels follow the individual element's distribution patterns, likely because of deposition variability following inputs from the river. The contents of mobile As and Hg correlated substantially with the contents of both metals that were extracted with 0.1 M HCl. In addition to the major pool in the residual fraction (65–87%), As was relatively abundant in Fe–Mn oxides/hydroxides, whereas Hg was abundant in the organic/sulfide fraction. The deposition and accumulation rates of As and Hg in the canyon clearly decreased as the depth of water increased. The depth distributions of both metals are likely controlled primarily by TOC and Fe–Mn oxides associated factors followed by a contribution from anthropogenic pollution. The metal pollution appears to have increased substantially around 1970, following the economic boom in Taiwan, suggesting that modern sediments in the Gaoping (Kaoping) Canyon were derived from the Gaoping (Kaoping) River (KPR).     

Hydrography, currents and distribution of suspended matter during a dumping experiment in the western Baltic Sea at a site near Warnemünde

During a dumping experiment on 20/21 June 2001, an extensive data record was collected to understand the dynamical processes in the water column of the investigation area and to validate model results. Weak westerly winds with strongly changing cloud coverage characterized the meteorological situation. During the second day the wind calmed down and moved shortly to easterly directions. The water column was characterized by a strong vertical stratification with discontinuity layers in temperature and salinity in 12 and 16 m. The current regime was dominated by outflow at the water surface and inflow along the German coast, with strong current shearing in the dumping area. The suspended matter clouds could be identified by optical methods and ADCP (Acoustic Doppler Current Profiler) scattering intensity. During the experiment the suspended matter plumes were only visible at the surface up to 1 h after the dumping. The aerial photographs document that the particle clouds at the surface drifted to the west and, after approximately 40 min, they were only weakly visible. The fine material was concentrated in the discontinuity layer leading to substantially higher values of optical parameters and suspended matter concentration than measured in the surface clouds. Due to the vertical current shears the material was transported in the water column in different directions. At the first day the maximum of the suspended matter in the discontinuity layer was in the north-western corner and in the bottom layer in the northeast corner of the dumping area. Strong wind conditions after the dumping led to periodical resuspension processes.     

The role of VMT reduction in meeting climate change policy goals

This article evaluates the case for vehicle miles traveled (VMT) reduction as a core policy goal for reducing greenhouse gases (GHGs), concluding the economic impacts and social consequences would be too severe given the modest potential environmental benefits. Attempts to reduce VMT typically rely on very blunt policy instruments, such as increasing urban densities, and run the risk of reducing mobility, reducing access to jobs, and narrowing the range of housing choice. VMT reduction, in fact, is an inherently blunt policy instrument because it relies almost exclusively on changing human behavior and settlement patterns to increase transit use and reduce automobile travel rather than directly target GHGs. It also uses long-term strategies with highly uncertain effects on GHGs based on current research. Not surprisingly, VMT reduction strategies often rank among the most costly and least efficient options. In contrast, less intrusive policy approaches such as improved fuel efficiency and traffic signal optimization are more likely to directly reduce GHGs than behavioral approaches such as increasing urban densities to promote higher public transit usage. As a general principle, policymakers should begin addressing policy concerns using the least intrusive and costly approaches first. Climate change policy should focus on directly targeting greenhouse gas emissions (e.g., through a carbon tax) rather than using the blunt instrument of VMT reduction to preserve the economic and social benefits of mobility in modern, service-based economies. Targeted responses are also more cost effective, implying that the social welfare costs of climate change policy will be smaller than using broad-brushed approaches that directly attempt to influence living patterns and travel behavior.     

Method for analyzing epicyclic gearboxes

This paper presents a method for analyzing epicyclic gearboxes by evaluating the speeds, torques and power of the external elements in epicyclic gear mechanisms, as well as the total ratios of the gear box. The method is based on the equations that describe each epicyclic gear mechanism and rules that assign appropriate codes to the external elements. The method emphasizes how power flows are transmitted through the epicyclic gears, as well as power losses. Analysis of an epicyclic gear box is performed to illustrate the proposed method.     

The utilisation and user characteristics of Uber services in London

ABSTRACT

Ridesourcing services such as Uber are nowadays a common feature within available transport options of many cities around the world (E.g. London & San Francisco). There has been much publicity about the potential impacts of ridesourcing services and how (or if) they should be managed or regulated without an objective understanding of who uses these services and why, as well as its current and future implications for public transport (PT).

Ridesourcing is part of a broader tech-driven, mobile app-based sharing phenomenon – the ‘sharing economy’ – which has disrupted traditional market models and industries, for example, the transport industry, where new players such as Uber have emerged and have quickly become part of the urban transport landscape. Uber has been at the forefront in disrupting the transport sector since its first launch in 2010 (San Francisco, USA). Since its launch, Uber has generated extensive media coverage and debate among policymakers, transport planners and transport authorities on how these services are affecting traditional transport modes such as buses and taxis. However, without objective empirical data – in terms of impacts on trip making characteristics, PT ridership and congestion – policymakers and transport regulators are yet to fully understand the real impacts ridesourcing services are having on the transport network.

This paper is part of broader research that aims to provide insights and empirical-based evidence on how Uber services are used (UberX and Uberpool) in London. A comprehensive survey was undertaken using a detailed questionnaire, issued to UberX and Uberpool users in London to gather detailed data on who uses the Uber services, why they use it and what are the trip purposes, in order to understand Uber user demographics and what effects (if any) Uber services are having on PT usage and trip making characteristics in London. The final findings provide important insights on Uber user demographics, trip purposes, types of trips replaced, impact on car ownership and why travellers use Uber services.     

The Circumferential Contact Problem for the Belted Radial Passenger Car Tire

The belted radial passenger car tire is idealized as a prestressed circular ring connected to a hub through a distribution of linear springs modeling the sidewall. A second distribution of such springs exterior to the ring represents the tread rubber. The tire is supposed to be at rest, loaded at its hub, and pressed onto a flat, rigid, frictiontess roadway. In this situation the linear differential equations of the model are solved using a singular perturbation technique. Given the load at the hub, the solutions furnish the length of tread in contact with the road, the radial and circumferential displacement of all points on the ring, and the distribution of pressure over the region of contact.