The rationality of conference pricing and output policies. Part 2

In Part 1^*of this article a background to the economics of conference operation was provided, and conference fleet planning and single voyage costs were discussed. This part of the paper will analyse the economic objectives of conferences and will consider the implications of ending the conference princing structure. Some recommendations are also offered.     

Variation of whitecap coverage with wave-field conditions

Field observations were carried out at a sea observation tower to investigate how whitecap coverage on the ocean surface responds to wave-field conditions. Images of whitecaps were taken for every 4 h or 7 h in the daytime using a 3CCD digital video camera fixed at 14 m elevation, and they were stored automatically in a hard disk video recorder at a time interval of 1 s. The determination of whitecap coverage was made by means of a digital image processing. The 1/3 power of whitecap coverage increases linearly with increasing the 10-m neutral wind speed. On the basis of the deflection angle between the propagating directions of wind waves and swell, wave-field conditions are classified into four cases. The present results show that whitecaps are produced most actively under the condition of the pure windsea and they tend to be suppressed by the presence of swell. It is difficult to find a certain relation between the deflection angle and whitecap coverage. Whitecap coverage also increases with the wave age in the same wind-speed conditions.     

A dynamic model of travel mode switching behaviour

An analogy is developed between individual traveler mode choice decisions and time-dependent product adoption processes in consumer behaviour. The structure of the adoption sequence is first described conceptually with reference to mode switch ing; this structure is then used to develop a simple mathematical model of mode switching behaviour over time. Factors to be considered in interpreting and operationalizing the model are then discussed at some length. The model appears too complex for direct mathematical solution except in the simplest cases; it may however, be amenable to numerical estimation, given empirical data on mode switching behaviour over time.     

Knock in dual-fuel diesel combustion with an E85 ethanol/gasoline blend by multi-dimensional simulation

In this paper, knocking combustion in dual-fuel diesel engine is modeled and investigated using the CFD code coupled with detailed chemical kinetics. The ethanol/gasoline blend E85 is used as the primary fuel in a dual-fuel combustion concept based on a light-duty diesel engine equipped with a common-rail injection system. The E85 blend is injected and well mixed with intake air in the intake manifold and is ignited by the direct injection diesel fuel. A 46-species, 187-reaction Multicomponent mechanism is adopted to model the auto-ignition process of the E85/air/diesel mixture ahead of the flame front. Based on the model validation, knocking combustion under boost and full load operating condition for 0 %, 20 %, 50 %, as well as 70 % E85 substitute energy is simulated. The effects of E85 substitute rate and two stage injection strategies on knock intensity, power output, as well as location of the auto-ignition initiation is clearly reproduced by the model. The calculation result shows that, for a high E85 rate of 50 % and 70 % with single injection strategies, the most serious knock and the origin of auto-ignition always occurs far away from where the flame of diesel spray is first generated, at the center of combustion chamber, due to higher pressure wave, relatively richer E85 mixture and longer distances of flame propagation. The two stage injection strategies with a small amount of diesel pilot injection ahead of the main injection primarily influence the ignition behavior of the directly injected fuel, leads to a lower pressure rise rate and a reduced propagation distance, both of which contribute to the attenuation of knock intensity for a higher E85 rate.     

Lateral stability control of dynamic steering for dual motor drive high speed tracked vehicle

In this paper, the torque and power required by dual motors for electric tracked vehicle during dynamic steering maneuvers with different steering radiuses are analyzed. A steering coupling drive system composed of a new type of center steering motor, two Electromagnetic (EM) clutches, two planetary gear couplers, and two propulsion motors is proposed for the dual motors drive high speed electric tracked vehicle (2MHETV), which aims to improve its lateral stability. An average torque direct distribution control strategy based on steering coupling and an optimization-distribution-based close-loop control strategy are designed separately to control the driving torque or regenerative braking torque of two propulsion motors for vehicle stability enhancement. Then models of the 2MHETV and the proposed control strategy are established in Recudyn and Matlab/Simulink respectively to evaluate the lateral stability of dynamic steering for the 2MHETV with different steering radiuses on hard pavement.The simulation results show that the lateral stability of the 2MHETV can be significantly improved by the proposed optimization-distribution-based close-loop control strategy based on steering coupling system.     

Effects of a classroom-based bridge resource management training on knowledge,attitudes, behaviour and performance of junior naval officers

This study asses the effectiveness of classroom-based bridge resource management (BRM) training for junior naval officers, in which general principles of human behaviour and performance in teams and under stress were conveyed. Although BRM training is recommended by the International Maritime Organization and is increasingly common in seafaring, very little is known about whether the adaptation of crew resource management (CRM) training from aviation to the maritime domain has been successful and what type of training is effective. A study with a quasi-experimental, two-factorial mixed design was conducted with BRM training as the between factor and time as the within factor. For 117 study participants, evaluation criteria were assessed on all levels as defined by Kirkpatrick (Train Dev J, 178–192 1979): subjective training evaluation, knowledge, attitudes and behaviour as well as performance while commanding a vessel during a real-world exercise. BRM participants showed better subjective training evaluations and more BRM-related knowledge than controls. Training did not produce differences between groups regarding BRM-related attitudes, the demonstration of non-technical skills or the overall success in the real-world exercise. Overall, BRM training effectiveness was rather low, which can most probably be attributed to the focus of training on generalizable knowledge, skills and attitudes at the expense of their specific application to the context of the real-world exercise. In the design of BRM and CRM training courses alike, the effective application of general principles to a given context must be defined, and the application must be emphasised during training delivery.     

Dynamic analysis of seatbelt systems with anti-inertial release mechanisms

In order to prevent the uncontrolled release of seatbelt buckles due to high acceleration caused by pretensioners, anti-g buckles that have pendulum-shaped g-masses to block the releasing motion are commonly adopted in seatbelt systems. However, even with the wide applications of anti-g buckles, the underlying operational principles of anti-g buckles have yet to be investigated. This work studies conditions for the engagement of the g-mass to prevent inertial release, and conditions for maintaining a blocked state under very high acceleration. Using a multibody model of an anti-g buckle, the effects of various design parameters on the performance of the anti-g buckle have been examined. It turns out that design variables associated with the geometry of the g-mass and its contacting surface configuration play important roles. In order to account for the dynamic interaction between driver and seatbelt, a multibody model of a seatbelt system is combined with a dummy model to form a single dynamic system. Using the measured displacement of the buckle during the explosion of a pretensioner as the driving condition for simulation, dynamic analysis of the seatbelt with driver interaction has been carried out. Through comparison with measured and computed accelerations of webbing, which shows good agreement, the validity of the model has been demonstrated. The dynamic model for seatbelt and driver can be used as a design tool for the development of anti-g buckles.     

Effect of structural variables on automotive body bumper impact beam

Increasing fuel economy has been a central issue in the development of new cars, and one of the important strategies to improve fuel economy is to decrease vehicle weight. In order to obtain this goal, researchers have sought to make bumpers lighter without sacrificing strength, ability to absorb impact, or passenger safety. In this study, the effects of structural variables on the torsional stiffness of a body bumper impact beam were analyzed for possible weight reduction. To this end, the effects of variation of section height, increase of impact beam thickness and the addition of stays in a bumper impact beam were carefully investigated and compared. Among these, the most effective way to increase the torsional stiffness of the bumper impact beam was found to be increasing the section height. In addition, the potential for overall weight reduction of the impact beam was examined by comparing the crash capability of a bumper using conventional steels with that of high-strength steel (boron steel) with a tensile strength of 1.5 GPa. This analysis could serve as a guide to design for optimal bumper impact beam development.     

Robustness analysis of ESC ECU to characteristic variation of vehicle chassis components using HILS technique

The ESC system, since its introduction in the mid 90s, has greatly contributed to prevention of vehicle accidents with its capability of maintaining vehicle stability in severe driving conditions. Due to its significant advantages, many nations are now adopting regulations that mandate installation of the ESC system in all classes of passenger vehicles — from mini to luxury. Accordingly it became important to know whether an ESC ECU can yield good performance on a wide range of vehicle parameter changes. In this paper, robustness analysis was conducted to study how characteristic variation of the main chassis components affect the performance of the ESC ECU. This analysis was carried out using a HILS system built on an actual ESC ECU. The variation range of each chassis component was carefully selected considering the component’s design criteria adopted in automotive industries. Based upon the robustness analysis results, the allowable variation ranges of the chassis components for ensuring sound performance of an ESC ECU were proposed.     

Development of an auxiliary mode powertrain for hybrid electric scooter

This paper proposes a design and implementation of an auxiliary mode, hybrid electric scooter (HES) by means of more cost-effective way for improving scooter’s performance and efficiency. The HES is built in a parallel hybrid configuration with a 24V 370W auxiliary power electric motor, a 24V 20AH battery, and an electronically controlled fuel injection internal combustion engine (ICE) scooter. In contrast to hybrid electric vehicles (HEVs), the issues concerning cost, volume, and reliability are even more rigorous when developing hybrid electric scooters (HESs). Therefore, the drive topology and control strategy used in HEV cannot be applied to HES directly. In order to hasten the developing phase and achieve the parametric tune-up of the HES component, a dynamic simulation model for the HES is developed here. Because the powertrain system is complex and nonlinear in nature, the simulation model utilizes mathematical models in tandem with accumulated experimental data. The method about the mathematical model construction, analysis and simulation of the hybrid powertrain used in a scooter are fully described. The efficacy of the model was verified experimentally on a scooter chassis dynamometer and the performance of the proposed hybrid powertrain is studied using the developed model under a representative urban driving cycle. Finally, Simulation and experimental results confirm the feasibility and prosperity of the proposed hybrid HES and indicate that the designed hybrid system can improve the fuel consumption rate up to 15% compared with the original scooter.