Analysis of travel activity determinants using robust statistics

This study investigates travel behavior determinants based on a multiday travel survey conducted in the region of Ghent, Belgium. Due to the limited data reliability of the data sample and the influence of outliers exerted on classical principal component analysis, robust principal component analysis (ROBPCA) is employed in order to reveal the explanatory variables responsible for most of the variability. Interpretation of the results is eased by utilizing ROSPCA. The application of ROSPCA reveals six distinct principal components where each is determined by a few variables. Among others, our results suggest a key role of variable categories such as journey purpose-related impedance and journey inherent constraints. Surprisingly, the variables associated with journey timing turn out to be less important. Finally, our findings reveal the critical role of outliers in travel behavior analysis. This suggests that a systematic understanding of how outliers contribute to observed mobility behavior patterns, as derived from travel surveys, is needed. In this regard, the proposed methods serve for processing raw data typically used in activity-based modelling.     

Model-based control system design in a urea-SCR aftertreatment system based on NH3 sensor feedback

This paper presents preliminary control system simulation results in a urea-selective catalytic reduction (SCR) aftertreatment system based on NH₃ sensor feedback. A four-state control-oriented lumped parameter model is used to analyze the controllability and observability properties of the urea-SCR plant. A model-based estimator is designed via simulation and a control system is developed with design based on a sliding mode control framework. The control system based on NH₃ sensor feedback is analyzed via simulation by comparing it to a control system developed based on NO_x sensor feedback. Simulation results show that the NH₃ sensor-based strategy performs very similarly in comparison to a NO_x sensor-based strategy. The control system performance metrics for NO_x index, urea index, urea usage, and NH₃ slip suggest that the NO_x sensor can be a potential alternative to a NO_x sensor for urea-SCR control applications.     

Grain refinement in bearing steels using a double-quenching heat-treatment process

A double-quenching (D/Q) process is proposed for heat-treating high carbon-chromium bearing steels to improve the fatigue properties through refinement of the microstructure. The new heat treatment method has two steps: The first step is a nitrocarburizing process that results in high surface hardness and lowers the transformation temperature. The second step is the same as in the conventional quenching process but can be conducted at a considerably lower temperature than in conventional quenching. The microstructure in the material that is caused by the D/Q heat treatment is much finer than in the conventional Q/T (quenching and tempering) process. In order to quantify the performance of the proposed heat-treatment process, various mechanical property tests are carried out. The rolling contact fatigue life of double-quenched bearing steels was eight times higher than in bearing steels that were treated by conventional Q/T.     

The trade-off between trips and distance traveled in analyzing the emissions impacts of center-based telecommuting

Several travel indicators were compared between telecommuting (TC) days and non-telecommuting days for a sample of 72 center-based telecommuters in California. Distance traveled decreased significantly on TC days, with average reductions of 51 person-miles (58%) and 35 vehicle-miles (53%). When weighted by telecommuting frequency, average reductions of 11.9% in PMT and 11.5% in VMT were found over a five-day work week. Person-trips and vehicle-trips increased slightly (but not significantly) on TC days. This was due to statistically significant increases in commute trips by telecommuters (who more often went home for lunch on their TC days), partly counteracted by decreases in non-commute travel. The drive-alone mode share increased on TC days, both for all trips, and for commute trips in particular. Walking and biking shares also increased modestly on TC days, whereas shares of transit and ridesharing declined. Despite the increase in trip rates, TC-day reductions were found for all pollutants analyzed: 15% for total organic gas emissions, 21% for carbon monoxide, 35% for oxides of nitrogen, and 51% for particulate matter. The reduction in VMT more than compensated for the marginal increase in number of trips (and consequently, cold starts) on telecommuting days.     

CO2 air–sea disequilibrium and preformed alkalinity in the Pacific and Indian oceans calculated from subsurface layer data

This work estimates new regionalized empirical parameterizations for preformed alkalinity (A_T^o) and the CO₂ air–sea disequilibrium (?C_dis). Both are key terms for the computation of anthropogenic CO₂ in the back-calculation methods. Data from the subsurface layer (75–180 m depth range) covering an area from North to South and from 19°E to 67.5°W (Pacific and Indian oceans) were taken from GLODAP (The Global Ocean Data Analysis Project) database. The subsurface layer is proved as a reliable reference for representing the main characteristics of the different water masses of the oceans. Besides, handing data from the two ocean basins altogether makes the new parameterizations of A_T^o and ?C_dis to be more globally consistent. Nevertheless, each ocean basin, at least in some regions, has different oceanographic characteristics based on its proper dynamical processes and water masses formation. In order to maintain each ocean basin ‘identity’ the whole domain was divided in six different regions (two of them sharing waters from Pacific and Indian oceans) and parameterizations in each region for both terms were obtained. Previously, data were transformed into a grid of 4°lat. × 5°lon. and the results obtained from the parameterizations were visualized and compare with pCO₂ climatologies. From the comparisons with previous ?C_dis estimations good results are obtained showing the reliability and robustness of the new regionalized empiric parameterizations.     

Model-based analysis of the mechanical subsystem of an air brake system

Most commercial vehicles such as buses and trucks use an air brake system, often equipped with an S-cam drum brake, to reduce their speed and/or to stop. With a drum brake system, the clearance between the brake shoe/pad and the brake drum may increase because of various reasons such as wearing of the brake shoe and/or brake drum and drum expansion caused by high heat generation during the braking process. Hence, to ensure proper functioning of the brake system, it is essential that the clearance between the brake shoe and the brake drum is monitored. In this paper, we present a mathematical model for the mechanical subsystem of the air brake system that can be used to monitor this clearance. This mathematical model correlates the push rod stroke transients and the brake chamber pressure transients. A kinematic analysis and a dynamic analysis of the mechanical subsystem of the air brake system were performed, and the results are corroborated with experimental data.     

Finite element analysis of overlay incorporating stress absorbing membrane interlayers against reflective cracking

A wheel tracking test was modelled to gain better understanding of the deflection and stress-strain distribution in an overlaid cracked pavements with and without membrane interlayer （SAMI）. For this purpose, commercial finite element software Abaqus 6.7-1 was used. Two different models were considered, one incorporating stress absorbing membrane interlayers （SAMIs） and the other without SAMI. In the study, full bond condition was assumed for the boundaries between the layers, and a linear elastic model was used for the analysis. The results show that introduction of SAMI caused greater deflection of the pavement. It is found that although with SAMIs, low stiffness is required, a very low stiffness may yield undesirable results. The results show that the introduction of SAMIs results in high strain concentration around the crack region, whilst the strain in the overlay is smaller than the values predicted in the models without SAMIs.     

��Ͻ�ͨ���ܶȲⶨ�����о�

交通流密度是衡量道路服务水平的指标之一. 当交通流中车辆长度和速度变化较大时,占有率则可以更好地反映交通流密度状况. 占有率的测定能够考虑到车辆的长度和速度变化,但是其值受到测量区域长度的影响,并且在混合交通情况下测量值缺乏准确性. 对于没有车道行驶规则的混合交通流,应当以整条路段为单位进行交通流分析. 因此本文提出了“区域占有率”的概念,且利用仿真技术验证其有效性. 对混合交通流条件下的占有率和区域占有率进行比较分析,区域占有率可以更合理地描述混合交通流的密度. 同时,得出混合交通条件下的区域占有率和交通流速度关系,证明了混合交通流条件下区域占有率提出的合理性和准确性.     

The influence of food quality on the nutritional acclimation of the copepod Acartia clausi

The influence of food quality on the nutritional metabolism of Acartia clausi was studied experimentally using four different diets: (1) diatom cells of Thalassiosira weissflogii, (2) detritus prepared from the same culture, (3) 50 : 50 mix on a protein basis of the two previous diets, and 4) dinoflagellate cells of Prorocentrum micans. For each trophic, ingestion, gut transit time, trypsin activity and K_m (half saturation constant) were measured at limiting and saturating concentration. Assimilation rates were also estimated for both pure diatoms and mixed live–detrital cell diets. Ingestion followed a Holling type 2 response for diets 1 and 4, a linear one for detritus and an intermediate response for diet 3. Gut transit time displayed different adaptive changes with food regime depending on protein concentration. Trypsin activity was lower for detrital food and trypsin K_m significantly decreased with increasing concentration of live diatoms. Assimilation rates were higher for live food than for mixed live–detrital food. Results illustrated that Acartia-type copepods optimize nitrogen or protein uptake. They suggest that besides chemoreception-mediated selectivity, internal controls by digestion and assimilation also regulate ingestion (feed-back).     

Use of an activity diary survey to examine travel and activity reporting in a home interview survey: An example using data from Adelaide,Australia

Research presented in this paper uses results from an acitivity diary survey to comment on the quality of data collected in a home interview travel survey. The two surveys were conducted in Adelaide, Australia. Evidence is presented to suggest that although a period of slightly more than three years separated the two surveys, the samples were reasonably similar with respect to their socio-demographic composition and real mobility levels. There was, however, a much higher level of travel and out-of-home activity reporting in the activity diary when compared to the home interview survey. Differences in reporting rates are examined in detail and areas of deficiency with the home interview survey are identified. The paper concludes with a short discussion of the possible implications of these deficiencies when home interview survey data is used to investigate a range of urban transport issues.