Effect of fuel injection strategies on the combustion process in a PFI boosted SI engine

A low-cost solution based on fuel injection strategies was investigated to optimize the combustion process in a boosted port fuel injection spark ignition (PFI SI) engine. The goal was to reduce the fuel consumption and pollutant emissions while maintaining performance. The effect of fuel injection was analyzed for the closed and open valve conditions, and the multiple injection strategies (MIS) based on double and triple fuel injection in the open-valve condition. The tests were performed on an optical accessible single-cylinder PFI SI engine equipped with an external boost device. The engine was operated at full load and with a stoichiometric ratio equivalent to that of commercial gasolines. Optical techniques based on 2D-digital imaging were used to follow the flame propagation from the flame kernel to late combustion phase. In particular, the diffusion-controlled flames near the valves and cylinder walls, due to fuel deposition, were studied. In these conditions, the presence of soot was measured by two-color pyrometry, and correlated with engine parameters and exhaust emissions measured by conventional methods. The open valve fuel injection strategies demonstrated better combustion process efficiency than the closed ones. They provided very low soot levels in the combustion chamber and engine exhaust, and a reduction in specific fuel consumption. The multiple injection strategies proved to be the best solution in terms of performance, soot concentration, and fuel consumption.     

Effects of valve timing and intake flow motion control on combustion and time-resolved HC & NOx formation characteristics

In SI engines, valve events have a major influence on volumetric efficiency, fuel economy and exhaust emissions. Moreover, swirl and tumble motions in the intake charge also improve combustion speed and quality by stratifying the mixture as well as intensifying the mixing rate of air and fuel. This paper investigates the behaviors of an engine and the combustion phenomenon for various intake valve timings and intake charge motions using CVVT system and port masking schemes. Test condition includes a part load and a cold idle condition inclusive of a cold start of the engine. Time-resolved HC and NOx emissions were also measured at an exhaust port to examine their formation mechanisms and behaviors with fast response HC/NOx analyzers. In conclusion, the fast burning of fuel and improved combustion quality by enhanced charge motions reduced unburned HC emissions, and advancing the intake valve opening reduced HC as well as NOx. Furthermore, HCs during the cold transient phase and idle conditions decreased with recalibrated start parameters such as lean air-fuel ratio and spark retardation via the enhancement of intake charge motions.     

Type synthesis of function-generating mechanisms for seat suspensions

Mechanisms with “negative” stiffness are a unique tool used to significantly improve vibration isolation for a vehicle driver via upgrade of the seat suspension. However, connection of such mechanisms to the suspension results in errors in the function generation process, and in most cases, makes motion impossible. An approach to type synthesis is presented in order to make this process more predictable, easy and thus more practical for the upgrade process. Structural classification of the suspensions is presented, and -an atlas of function-generating mechanisms for suspensions that reveals the effect of “negative” stiffness is completed. All of the function-generating mechanisms appear in the atlas as result of enumeration. Structural properties of novel and existing mechanisms are compared. Finally, some advantages in practical use of novel suspensions with “negative” stiffness are illustrated.     

Effects of mixture stratification on HCCI combustion of DME in a rapid compression and expansion machine

Compression ignition of homogeneous charges in internal combustion (IC) engines is expected to offer high efficiency of DI diesel engines without high levels of NOx and particulate emissions. This study is intended to find ways of extending the rich limit of HCCI operation, one of the problems yet to be overcome. Exhaust emissions characteristics are also explored through analyses of the combustion products. DME fuel, either mixed with air before induction or directly injected into the combustion chamber of a rapid compression and expansion machine, is compressed to ignite under various conditions of compression ratio, equivalence ratio, and injection timing. The characteristics of the resulting combustion and exhaust emissions are discussed in terms of the rate of heat release computed from the measured pressure, and the concentrations of THC, CO, and NOx are measured by FT-IR and CLD. The experimental data to date show that operation without knock is possible with mixtures of higher equivalence ratio when DME is directly injected rather than when it is inducted in the form of a perfectly homogeneous fuel-air mixture. Although fuel injected early in the compression stroke promotes homogeneity of the DME-air mixture in the cylinder, it causes the mixture to ignite too early to secure good thermal efficiency and knock-free operation at high loads. Low temperature reactions occur at about 660K regardless of the fueling methods, fuel injection timing and equivalence ratio. The main components of hydrocarbon emissions turned out to be unburned fuel (DME), formaldehyde and methane.     

The sensitivity of parameter estimates to data specification in mode choice models

Standard network data are generally used in estimation of mode choice models. These data are inaccurate in several ways, but the cost of correcting the inaccuracies is great. This paper analyzes the effects which correcting some of the inaccuracies in the standard network data has on the estimated parameters of mode choice models. Models are estimated on the standard network data and on data which have been adjusted so as to correct the problems in the standard network data. It is found that, for analysis of policies affecting transfer wait times or distances to bus stops, correction of the standard network data is advisable. For other policy analyses, however, it seems that the extra expense of correcting the standard data is unnecessary.     

Integration of vehicle routing and resource allocation in a dynamic logistics network

A shipper plans daily hub-to-hub transports within a hub and spoke network. Since a limited number of swap containers is available for transportation, two problems arise. 1. Swap containers have to be routed as pickup and delivery requests in multi-hub tours. 2. Day-by-day routing may lead to an imbalance of swap containers requiring a dynamic allocation. Neglecting interdependencies between vehicle routing and resource allocation seems inferior. An integration of the two problems overcomes this deficiency. We formulate mathematical models and propose integration approaches. The advantages of these approaches are discussed based on a computational study.     

Ranking of factors contributing to higher performance in the ocean transportation industry: a multi-attribute utility theory approach

Ocean transportation has been mainly studied from an economic and strategic point of view. This paper adopts an operations management approach aiming at the identification of the value-adding attributes that characterize the ocean transportation industry. This is achieved by using Johansson et al.'s 1 four value metrics—service, quality, cost, time—which are used for the identification of the contribution that different factors make to the total created value. In this paper, multi-attribute utility theory (MAUT) has been used to measure and compare the value of different processes of various sectors of the ocean transportation industry. The application of MAUT methodology is illustrated with an example from the four sectors of the industry: liner, dry bulk, liquid bulk and specialized. Results suggest that there is strong emphasis placed by ocean transportation companies on quality and that there is differentiating importance put on service and cost by different sectors. Time is seen as the lowest value contributor by all four sectors of the surveyed companies.     

Predicting the chloride penetration of fly ash concrete in seawater

In this study, a model for predicting chloride penetration in fly ash concrete under long-term exposure in a marine environment is developed. The empirical model was based on 2-, 3-, 4-, and 5-year investigation of concretes in a marine site. Regression analysis of the data was carried out by applying Fick's second law of diffusion to generate an empirical formula for predicting chloride concentration in concrete. The model uses the water to binder (W/B) ratio, fly ash content, distance from the concrete surface, and exposure time. Model validation revealed that the predicted chloride concentration levels were within a ±25% error margin (R² = 0.91 ? 0.99) in the samples used to develop the model. The model was also verified using data from previous laboratory and field studies. Most predicted chloride concentration levels were within a ±30% margin of error from field samples. The model also predicted the strong effect of fly ash and W/B ratio on reducing chloride diffusion in concrete. Results clearly indicated that a high volume fly ash replacement (up to 50% by weight of binder) and a low W/B ratio will yield good chloride resistance in concrete under long-term exposure in a marine environment.     

Hydroelastic responses and interactions of floating fuel storage modules placed side-by-side with floating breakwaters

This paper is concerned with the hydroelastic responses and hydrodynamic interactions of two large floating fuel storage modules placed side-by-side with the presence of floating breakwaters. These modules and breakwaters form the floating fuel storage facility (FFSF). The floating storage modules and breakwaters are modeled as plates and the linear wave theory is used to model the water waves in the numerical model. The numerical model is verified with existing numerical results and validated with experimental test. Numerical simulations are performed to determine the hydroelastic behavior and hydrodynamic interactions of floating storage modules placed adjacent to each other and enclosed by floating breakwaters under various incident wave angles. The effects of breakwaters, drafts, channel spacing formed by the two adjacent modules and water depth on the hydroelastic responses of the modules are investigated. The wave induced responses of multiple floating storage modules enclosed by floating breakwaters are also examined.     

Long-memory characteristics of urban roadside air quality

Carbon monoxide is a major contributor to air pollution in urban cities, particularly at the roadside. Hourly, monthly and seasonal mean carbon monoxide concentration data are collected from a roadside air monitoring station in Hong Kong over 7-years. The station is a few metres from a major intersection surrounded by tall buildings. In particular, hourly patterns of concentrations on different days of the week are investigated. The data show that hourly carbon monoxide concentrations resemble the traffic pattern of the area and tend to be lower in the summer. Using a seasonal autoregressive integrated moving average models shows that the daily traffic cycle strongly influences concentrations. Further, it is found that urban roadside carbon monoxide monitoring data exhibits a long-memory process, suggesting that a model incorporating long memory and seasonality effects is needed simulate urban roadside air quality.