Experimental study on liquefied petroleum gas fueled homogeneous charge compression ignition engine

International Journal of Automotive Technology - EGR (Exhaust Gas Recirculation) is one of the most effective techniques currently available for reducing NOx emissions from compression ignition...     

New energy recovery H∞ robust controller for electric bicycles

The electric controller is one of the most crucial components in an electric bicycle. The overall performance of the whole system heavily depends on the properties of the controller. The authors use the robust control theory to design a new H_∞ robust controller for the closed speed-current dual-loop driving and braking system. The designed controller also incorporates the driving and energy recovery braking circuit. Therefore, it has energy recovery ability, which coverts the kinetic energy wasted in braking into electric energy to recharge the battery. This prolongs the driving distance per battery charge. The simulations and experiments show that the new H_∞ robust controller out-performs the traditional PID controller in many respects including stability, error, responding speed and driving distance per battery charge.     

General Construction Technology Scheme of Tianshan Shengli Tunnel on Urumqi-Yuli Expressway北大核心CSCD

With a total length of about 22 km, Tianshan Shengli Tunnel on Urumqi-Yuli Expressway is currently the longest expressway tunnel under construction in the world. It adopts the construction scheme of "3 tunnels (2 D& B main tunnels and 1 TBM-driven middle pilot tunnel) + 4 shafts", which is characterized by great construction difficulty and high technical standard requirements. The tunnel construction is faced with technical challenges such as TBM passing through large fault fracture zones, long-distance construction ventilation in three tunnels, deep and large shaft construction and logistics organization in two-main tunnel construction assisted by middle pilot tunnel. In the parallel three-tunnel method design of Tianshan Shengli Tunnel, the TBM-driven middle pilot tunnel can not only play the role of advanced pilot tunnel, but also assist the construction of the two main tunnels and speed up the construction progress. For the middle pilot tunnel, the TBM excavation diameter is 8.4 m, and the initial support is designed as 100% force-bearing capacity in construction period, which can meet the requirements for two-way material transportation, ventilation and belt mucking in the pilot tunnel. Vault suspension scheme is adopted for the continuous belt conveyor, which can reduce the impact on the material flow organization in the cross passages. Multifunctional service vehicles (MSVs) independently developed by CCCC Group are used for the transportation of TBM materials and prefabricated inverted arch blocks, which can realize double-headed driving. TBM will pass through two large fault fracture zones F6 and F7. According to the stability of the surrounding rock at the tunnel face, the targeted treatment measures would be adopted. If necessary, the scheme of "steel segment + extruded concrete" shall be used for the initial support. In case of serious machine jamming or rock collapse, the heading expansion excavation method or bypass heading method shall be used. Tianshan Shengli Tunnel adopts phased forced ventilation option, and the ventilation mode is designed in stages with the change of tunnel construction stage. The fans and air pipes used are imported ones, and a ventilation management team is set up to strengthen ventilation management and ensure ventilation quality. Highly mechanized construction is used for the two D& B main tunnels, the application of equipment such as three-arm rock drilling jumbo and wet shotcrete machine is promoted, so as to reduce the number of workers and labor intensity, and improve work efficiency. The deep shafts of Tianshan Shengli Tunnel are constructed by short-section excavation and lining mixed operation method, and the initial support is lined by formwork pouring concrete, so as to realize safe and rapid excavation. According to the research results, the construction technology scheme for Tianshan Shengli Tunnel can meet the needs of tunnel construction. The research results can be directly used to guide the construction of Tianshan Shengli Tunnel, and provide reference for the construction of extra long highway tunnels in high-altitude areas. © 2022, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Development of a slip control anti-lock braking system model

This paper describes the initial phase of work carried out as part of an on going study investigating the interaction between the tyre, suspension system and an antilock braking system (ABS). The modelling, analysis simulations and integration of results have been performed using an industry standard Multibody Systems Analysis (MBS) program. A quarter vehicle model has been used together with an individual front suspension system represented by interconnected rigid bodies. The tyre model used can be integrated into vehicle handling simulations but only the theory associated with the generation of longitudinal braking forces is described here. An ABS model based on slip control has been used to formulate the braking forces described in this paper. The simulations, which have been performed braking on wet and dry road surfaces, compare the performance of two different tyres.     

Bregman's balancing method

In this paper we observe that most of the independently discovered balancing methods, used in transportation planning and in other fields, are in fact special cases of a method of Bregman. Examples include the usual Kruithof or Furness method, the Evans-Kirby three dimensional balancing procedure, the Murchland multiproportional balancing procedure, the Osborne or Grad method for preconditioning matrices, the Jefferson-Scott procedure for gravity models with inequality constraints, and the method considered by Macgill for partially constrained gravity models. The convergence of all of these methods follows from Bregman's general result.     

在公交占主导地位的香港居民对小汽车的依赖性

减少城市的小汽车交通量,促进城市交通运输能力的持续稳定发展,已成为人口密集型的大城市制定交通运输政策的一项主要目标,也是香港制定交通运输政策所期望达到的目标。但根据国际标准,香港居民对小汽车的拥有量和使用频率已经非常低了。首先是明确香港人为什么要拥有小汽车,其次是探索小汽车的拥有者对小汽车的依赖程度,第三是识别政策的含意。基于对401位小汽车拥有者的调查,得出了这样的结论：尽管城市里有很好的公共交通,但人们一旦拥有了小汽车后,便会开始变得依桢小汽车进行所有的外出活动。因此,为了促进交通运输持续、稳定发展,小汽车的拥有量和使用频率必须受到控制。     

Integrated fault detection and diagnosis system for longitudinal control of an autonomous all-terrain vehicle (ATV)

This paper presents a fault detection and diagnosis (FDD) method to enhance the reliability and safety for longitudinal control of an autonomous all-terrain vehicle (ATV). An integrated approach using decentralized and centralized FDD is proposed to optimize the tradeoff between sensitivity and robustness. While the decentralized approach is suitable for detecting faults in actuators and sensors directly connected to a single processor, it is sensitive to noises and disturbances and thus may result in false alarms. On the other hand, the centralized approach is based on information communicated between multiple processors, and it detects and diagnoses faults through analyzing concurrent computations of multiple hardware modules. However, its performance is still limited to isolating faults specifically in terms of components in the single hardware. To incorporate the advantages of both FDD approaches, a two-layered structure integrating both decentralized and centralized FDD is proposed and allows us to perform more robust fault detection as well as more detailed fault isolation. Finally, the proposed method is validated experimentally via field tests of an ATV.     

Evaluation of low-temperature diesel combustion regimes with n-Heptane fuel in a constant-volume chamber

The concept of Low Temperature Combustion (LTC) has been advancing rapidly because it may reduce emissions of NOx and soot simultaneously. Various LTC regimes that yield specific emissions have been investigated by a great number of experiments. To accelerate the evaluation of the spray combustion characteristics of LTC, to identify the soot formation threshold in LTC, and to implement the LTC concept in real diesel engines, LTC is modeled and simulated. However, since the physics of LTC is rather complex, it has been a challenge to precisely compute LTC regimes by applying the available diesel combustion models and considering all spatial and temporal characteristics as well as local properties of LTC. In this paper, LTC regimes in a constant-volume chamber with n-Heptane fuel were simulated using the ECFM3Z model implemented in a commercial STAR-CD code. The simulations were performed for different ambient gas O₂ concentrations, ambient gas temperatures and injection pressures. The simulation results showed very good agreement with available experimental data, including similar trends in autoignition and flame evolution. In the selected range of ambient temperatures and O₂ concentrations, soot and NOx emissions were simultaneously reduced.     

Development of a driving cycle for the measurement of fuel consumption and exhaust emissions of automobiles in Bangkok during peak periods

The exhaust emissions and fuel consumption rates of newly registered automobiles in Thailand are currently assessed using the standard driving cycle of the Economic Commission of Europe (ECE). Because of the highly different driving conditions, the assessment results may not reflect realistic amounts of emissions and fuel consumption for vehicles in Bangkok traffic, which is well known for its congestion. The objective of this study is therefore to develop a new driving cycle for vehicles traveling on Bangkok’s main roads during peak traffic hours. This paper first presents the development of a method for selecting representative road routes with traffic conditions that are representative of traffic in Bangkok for conducting real-world driving speed data collection. These real-world data are obtained by driving a car equipped with a speed-time data logger along those selected road routes. Several driving characteristics, including various profiles of microtrips, are analyzed from the collected speed-time data, and a number of target driving parameters are then defined for use as a set of criteria to justify the best driving cycle. A procedure for generating driving cycles from the analyzed real-driving data is also developed, and the method to select the cycle that is most representative of Bangkok traffic is described. Comparisons found in the study show that the target driving parameters of the newly developed driving cycle are much closer to those obtained from the real-world measured data than those calculated from the presently used European drive cycle. This would imply that the obtained driving cycle will produce more realistic results of the emissions and fuel consumption assessment tests for vehicles traveling in Bangkok. The methods developed in this study for route selection and driving cycle construction can easily be adopted by other big cities to develop their own vehicle driving cycles. Furthermore, although the developed methods are for passenger cars, similar approaches can be applied to develop driving cycles for other types of vehicle, such as city buses and pick-up trucks.