铁路基桩反射波法完整性检测应用探讨

对使用反射波法检测铁路大直径基桩完整性时,其反射波曲线中浅部会产生1个正向缺陷信号的问题作了详细探讨。经分析,它是由于基桩在冲击成孔或人工挖孔施工中,其桩顶砂浆没有清理干净和人工挖孔桩护壁等原因引起的。所以,在采用反射波法检测基桩完整性时,其桩顶砂浆要清理干净,且露出含有粗细骨料均匀致密呈青色的混凝土新表面,而对于人工挖孔桩的护壁影响因素可在桩体混凝土强度达到设计强度95%时进行检测。这样,就能够消除反射波曲线中浅部的正向缺陷信号,以便正确判定基桩完整性。     

越江地铁隧道土压平衡盾构施工土压力分区研究

在江底进行地铁盾构施工,若土仓压力控制不当,会使江水涌入掘进面,带来很大危险.为降低盾构越江施工的风险,以杭州地铁1号线盾构隧道越江工程为背景,根据该区间工程的线形、地质水文特点及周边环境的情况,将盾构越江段分为6个区段,并分析了各区段的特点.在试验段施工参数实测数据分析的基础上,根据越江段的分区情况和施工环境等条件,提出了越江段的土仓压力合理设定值为0.15～0.38 MPa.越江段土仓压力实测结果为0.21～0.52 MPa,土仓压力实测值与理论值的比值为1.08～2.17.通过对土仓压力进行分区研究,为土压平衡盾构顺利穿越钱塘江提供了一定的技术参考,也可为其他越江盾构工程提供借鉴.     

纤维沥青混合料配合比设计方法初探

纤维沥青混合料由于其优良的技术性能与价格优势和施工技术简单的特点，目前已得到广泛重视，但其性能优势要通过科学的施工技术体现，而混合料配合比设计是其中关键技术之一。结合纤维沥青混合料自身的特点，以方便易操作为原则，提出了纤维的选择原则及以马歇尔试验为基础的纤维沥青混合料配合比设计方法。     

Neighborhood services,trip purpose,and tour-based travel

Communities are increasingly looking to land use planning strategies to reduce drive-alone travel. Many planning efforts aim to develop neighborhoods with higher levels of accessibility that will allow residents to shop closer to home and drive fewer miles. To better understand how accessible land use patterns relate to household travel behavior, this paper is divided into three sections. The first section describes the typical range of services available in areas with high neighborhood accessibility. It explains how trip-based travel analysis is limited because it does not consider the linked (chained) nature of most travel. The second section describes a framework that provides a more behavioral understanding of household travel. This framework highlights travel tours, the sequence of trips that begin and end at home, as the basic unit of analysis. The paper offers a typology of travel tours to account for different travel purposes; by doing so, this typology helps understand tours relative to the range of services typically offered in accessible neighborhoods. The final section empirically analyzes relationships between tour type and neighborhood access using detailed travel data from the Central Puget Sound region (Seattle, Washington). Households living in areas with higher levels of neighborhood access are found to complete more tours and make fewer stops per tour. They make more simple tours (out and back) for work and maintenance (personal, appointment, and shopping) trip purposes but there is no difference in the frequency of other types of tours. While they travel shorter distances for maintenance-type errands, a large portion of their maintenance travel is still pursued outside the neighborhood. These findings suggest that while higher levels of neighborhood access influences travel tours, it does not spur households to complete the bulk of their errands close to home.     

钢箱梁构件对沥青铺装层应变的影响

从钢箱梁构件角度出发．按平板、板和U肋、无横隔饭的箱梁及带横隔板的局部段箱梁，用有限元方法分忻了相同荷位的荷载在铺装层中产生的最大应变．通过对比了解钢箱梁各构件对铺装层应变的影响程度。     

路面养护决策支持模块数据接口的研究

许多公路管理部门在为既有的道路基础设施管理系统移植路面养护决策支持模块时常常面临这么一个困惑：一方面，既有的道路基础设施管理系统中拥有大量的历史数据，但这些历史数据往往很难直接被新的路面决策支持模块所引用；另一方面，如若以路面决策支持模块为基础，重新开发一套道路基础设施管理系统，那代价又太大。针对这一现象，本提出通过设计数据接口的模式，将路面养护决策支持模块移植到既有的道路基础设施管理系统中，从根本上解决新、旧系统之间的数据协调问题。     

胶焊,点焊和胶接接头应力分布的比较分析

采用三维弹塑性有限元数值分析方法，比较了分析了胶焊，点焊和胶接接头的应力分布情况，结果表明，胶焊接头与胶接接头的应力分布特征值基本相同，仅在焊点区内略有区别，胶焊接头中的胶粘剂有效地降低了点焊接头中焊点的应力，消除了其焊点过级处的应力集中，所得应力分布可合理解释已有强度试验结果。     

Exploring the impact of walk–bike infrastructure,safety perception,and built-environment on active transportation mode choice: a random parameter model using New York City commuter data

This study estimates a random parameter (mixed) logit model for active transportation (walk and bicycle) choices for work trips in the New York City (using 2010–2011 Regional Household Travel Survey Data). We explored the effects of traffic safety, walk–bike network facilities, and land use attributes on walk and bicycle mode choice decision in the New York City for home-to-work commute. Applying the flexible econometric structure of random parameter models, we capture the heterogeneity in the decision making process and simulate scenarios considering improvement in walk–bike infrastructure such as sidewalk width and length of bike lane. Our results indicate that increasing sidewalk width, total length of bike lane, and proportion of protected bike lane will increase the likelihood of more people taking active transportation mode This suggests that the local authorities and planning agencies to invest more on building and maintaining the infrastructure for pedestrians. Further, improvement in traffic safety by reducing traffic crashes involving pedestrians and bicyclists, will increase the likelihood of taking active transportation modes. Our results also show positive correlation between number of non-motorized trips by the other family members and the likelihood to choose active transportation mode. The model would be an essential tool to estimate the impact of improving traffic safety and walk–bike infrastructure which will assist in investment decision making.     

CeO2改性阴极扩散层对质子交换膜燃料电池性能的影响

采用水热法制备纳米CeO2空心球,以一定比例与碳粉、PTFE混合,经超声震荡后均匀喷涂在经疏水处理过的碳纸表面上形成微孔层.将改性扩散层与传统扩散层进行比较,通过扫描电子显微镜、能谱测试分析、接触角、接触电阻表征,扩散层的物理性能几乎不会改变.再将扩散层组装成单电池进行一系列的电池性能测试,结果表明:掺杂CeO2的阴极扩散层组装而成的单电池无论是电池性能、交流阻抗谱还是动态响应测试均优于传统扩散层组装的单电池.即证明了掺杂CeO2制备的改性阴极扩散层由于其储放氧功能,可以加速氧气传质,增加催化剂表面氧分压,进而提升PEMFC的单电池的动态响应性能.     

Development of knowledge based body structure concept design model

The purpose of this study is to propose a concept design process for an automotive body structure using technical information on the major joints and members of vehicles. First, in order to collect the technical information on major joints and members, 17 vehicles were selected using benchmark data. The collected technical information for the selected vehicles was the cross sectional shapes of each joint and member which were used for the analysis of joint stiffness, crashworthiness and static stiffness of the member to make a database along with cross section properties. This study applied a ‘What If Study’ technique to perform a concept design of an automotive body using the analyzed information and selected cross section meeting the design objectives. The criteria for the selection of the cross section were defined by subdividing the defined design objectives of an automotive body structure and constraints into members and joints. In order to configure an analysis model of an automotive body structure using the selected cross section, a shape parametric model was used and static stiffness, dynamic stiffness and crashworthiness were assessed to evaluate the configured automotive body structure. The evaluation result showed that the crashworthiness and static/dynamic stiffness were improved compared to an existing body structure. In addition, the weight of the body structure was reduced. Through this study, the process that can rapidly and effectively derive and evaluate the concept design of an automotive body structure was defined. It is expected that, henceforth, this process will be helpful for the study of automotive body structures.