A finite element model for flexible pipe armor wire instability

The constructive disposition of metallic and plastic layers confers flexible pipes with high and low axial stiffness respectively when tensile and compressive loads are applied. Under certain conditions typically found during deepwater installation or operation, flexible pipes may be subjected to high axial compression, sometimes accompanied by bending. If not properly designed, the structure may not be able to withstand this loading and fails. From practical experience observed offshore and in laboratory tests two principal mechanisms, which will be discussed in this paper, have been identified regarding the configuration of the armor wires. When the pipe fails by compression the armor wires may exhibit localized lateral or radial deflections, consequently permanent damage is observed in the armor wires with a sudden reduction of the structure’s axial stiffness. The pressure armor may also unlock, thus causing potential fluid leakage.In this work a finite element model is developed to estimate the critical instability load and failure modes. An axi-symmetric model is constructed employing a complex combination of beam and spring elements. For each armor layer only one wire needs to be modeled, hence the computational cost is minimized without compromising the phenomenon characterization. A parametric case study is performed for a typical flexible pipe structure, where the friction coefficient between the wire armors and the external pressure are varied, and the critical instability loads and failure modes are obtained and results are discussed.     

12毫米厚铝合金板的搅拌摩擦焊研究(英文)

Most of the investigations regarding friction stir welding(FSW)of aluminum alloy plates have been limited to about 5 to 6mm thick plates.In prior work conducted the various aspects concerning the process parameters and the FSW tool geometry were studied utilizing friction stir welding of 12 mm thick commercial grade aluminum alloy.Two different simple-tomanufacture tool geometries were used.The effect of varying welding parameters and dwell time of FSW tool on mechanical properties and weld quality was examined.It was observed that in order to achieve a defect free welding on such thick aluminum alloy plates,tool having trapezoidal pin geometry was suitable.Adequate tensile strength and ductility can be achieved utilizing a combination of high tool rotational speed of about 2000 r/min and low speed of welding around 28 mm/min.At very low and high dwell time the ductility of welded joints are reduced significantly.     

Optimizing shipping company operations using business process modelling

In order to identify the elements constituting quality in services, a business process modelling methodology has been applied in the case of a Greek liner shipping company. The company operations have been identified and analysed in order to assess the complete performance of service elements and thereafter identify how to match the service performance against the user requirements. A liner container service within Europe has to compete with the road transport which, in many cases, is an alternative to the sea transportation and not complementary to it. Thus, not only the ship has to be envisaged when aiming to improve quality in services but also the whole chain, namely port authorities, land transportation enterprises, subcontractors, agents, charterers and others. A set of potential improvements within this framework are thus suggested and time and cost (examined in a specific voyage scenario) are measured before and after the implementation of these measures. Very large time and cost savings are observed after the application of the technology improvements, allowing, in fact, the shipping company to even increase the number of round trips per year in the examined route. This indicates that very large benefits can be drawn by analysing and critically adjusting business processes in modern shipping companies.     

Linking ocean container carrier capabilities to shipper–carrier relationships: a case study

ABSTRACT

As outsourcing and offshoring continue to expand, the ocean container industry serves a critical and still increasing role in supporting global trade. Yet, perceived commoditization and intense price competition among ocean container carriers limit opportunities for competitive advantage and formation of long-term shipper–carrier relationships. This environment ultimately yields an unhealthy industry that threatens the stability of global supply chains. Extant literature provides limited insight into how carriers can build strong relationships with shippers to overcome the short-term, transactional-orientation of the industry. Examining a case study of a major ocean container carrier, we apply structural equation modeling to shipper survey data to explore how carrier operational, service, and pricing capabilities influence the strength of the long-term shipper–carrier relationship. Furthermore, we identify unique clusters of shipper needs, helping the carrier understand when and how to promote a particular portfolio of capabilities to customers.     

A first glimpse on policy packaging for implementation of BRT projects

Policy packaging (i.e. the combination of individual policies and measures in order to achieve a certain goal) is a common practice in urban mobility management used to create synergies between single policies or to mitigate negative effects of a given policy.     

The vertical disintegration of ship management: choice criteria for third party selection and evaluation

An assessment of the rationale for the vertical disintegration of ship management suggests that there might be compelling economic benefits for the separation of ownership from management. In this context, as a means for developing effective marketing strategies, it is important for ship managers to know the criteria used by current and prospective clients for ship manager selection and evaluation. The aim of this paper is to empirically identify the dimensions for ship manager selection and performance evaluation and their relative importance and to discuss the implications for marketing emanating from such an assessment. The methodology adopted includes the collection of secondary and primary data, both from ship managers and their clients, using interviews and a mail survey. The results indicate the prevailing importance of certain dimensions in selection (e.g. technical ability, reputation, competency) and evaluation (responsiveness, trustworthiness, technical ability), whereas it also found that price alone is not perceived to be as important in ship manager selection. It is concluded that placing emphasis on such dimensions in the formulation of a marketing strategy will contribute towards the attraction and retention of clients, whereas cost-cutting measures to allow price reduction, as well as advertising, will be ineffective over the long term.     

Wakes from Large High-Speed Ferries in Confined Coastal Waters: Management Approaches with Examples from New Zealand and Denmark

Large high-speed craft carrying passengers and vehicles produce wake waves that are different from both conventional vessels and smaller fast vessels. Wakes from these high-speed craft can cause environmental problems (such as beach change, ecological disturbance, and damage to structures and archaeological sites) and safety problems (for navigation and for users of the beach and nearshore) in confined waters. As a consequence of the higher speed, the vessel wakes also have a longer period than wakes caused by conventional ships and may lead to substantial wave action in shallow water environments. In both New Zealand and Denmark, issues relating to high-speed craft wakes were not addressed until after the vessels had begun operation, and complex coastal management issues with possibly broader application have had to be addressed. Emerging management strategies have involved regulation using speed and wave height criteria.     

Training Needs of Coastal Resources Decision Makers in Ohio's Lake Erie Basin

This article describes results from a study focused on informational and knowledge needs of local coastal resources decision makers in the Ohio Lake Erie basin. New information was obtained through a series of focus groups of local decision makers and key training providers in the basin. The results suggest that training providers and local coastal resources decision makers have differing perceptions of knowledge and information needs and training venues. The results suggest a role for state and federal agency training providers as coordinators and facilitators of an enhanced learning network among decision makers, including support of an information clearinghouse, adoption of appropriate e-based learning modalities, and regionally based learning and practice networks to improve the function of the training market to meet local decision maker needs.     

两类锚泊系统在漂浮式双体浮动式波能转换装置垂荡运动状态下的性能（英文）

This work investigated the influence of two types of mooring systems on the hydrodynamic performance of a two-body floating wave energy converter(WEC). It also investigated the effects of the physical parameters of the mooring system on the amount of extractable power from incident waves in the frequency domain. The modeled converter comprised a floating body(a buoy), a submerged body with two mooring systems, and a coupling system for two bodies. The coupling system was a simplified power take-off system that was modeled by a linear spring-damper model. The tension leg mooring system could drastically affect the heave motion of the submerged body of the model and increase relative displacement between the two bodies. The effects of the stiffness parameter of the mooring system on power absorption exceeded those of the pretension tendon force.     

Analyzing the dispersion of cargo vapors around a ship’s superstructure by means of wind tunnel experiments

In a previous study, it was found that cargo tank operations like cleaning and venting, lead to higher cargo vapor concentrations around the ship’s superstructure. Can wind tunnel experiments confirm these findings? Is there an improvement when using higher outlets at high velocities compared to lower outlets with a low outlet velocity? Is there a relation between relative wind speed and measured concentration? These questions were investigated in the Peutz wind tunnel. By using a tracer gas for the wind tunnel experiments, concentration coefficients have been calculated for various settings. The study shows that using high-velocity outlets is an efficient way to keep concentrations as low as possible. The only exception is for relative wind directions from the bow. In this last case using a manhole as ventilation outlet leads to lower concentrations. With increasing wind speeds the building downwash effect resulted in higher concentration coefficients near the main deck. This study confirms our on-board measurements and suggests the lowering of the ventilation inlet of the accommodation, so that the high-velocity outlet can be used safely at all times.