胶焊,点焊和胶接接头应力分布的比较分析

采用三维弹塑性有限元数值分析方法，比较了分析了胶焊，点焊和胶接接头的应力分布情况，结果表明，胶焊接头与胶接接头的应力分布特征值基本相同，仅在焊点区内略有区别，胶焊接头中的胶粘剂有效地降低了点焊接头中焊点的应力，消除了其焊点过级处的应力集中，所得应力分布可合理解释已有强度试验结果。     

Analysis of Driver's Decelerating Strategy in a Car-following Situation

This report describes a decelerating driver-model expressed by driving mode transition in car-following situations. The assumptions for constructing the model are that decelerating strategy of a driver is classified into several simple driving modes and that a driver changs his driving modes based on his perceptible characteristics and experiential rules. Deceleration action is divided into three states; following, standing and braking, which are applied to the model. The model has two paths for driver's decelerating action, one of which is selected by the driver based on the perceptible characteristics and experiential rules. The suitability of the model has been experimentally verified.     

新的改性沥青设备与加工技术

通过对沥青改性方法的研究 ,基于提高改性沥青单位小时产量的目的 ,探索出利用高速剪切和二次泵技术实施沥青改性。这种加工技术突破了以往沥青改性采用的“胶体磨”技术 ,适用范围广 ,可加工不同种类的改性沥青 ;采用该种加工技术提高了生产效率 ,产品的技术指标满足甚至超过规范要求。通过研制出的改性沥青生产设备制备出 PE、SBS、化学网构改性沥青等 ,而且将这几种改性沥青已应用于实体工程。     

Simulation of flow in diesel particulate filter system using metal fiber filter media

Metal fiber is introduced as a new filter media in wall-flow Diesel Particulate Filter (DPF) system. This technology has high temperature durability which is required for filter regeneration, and can maintain the mechanical strength even in the extreme exhaust-related vibrations of vehicles. However, the regeneration near the wall (outer layer) is more difficult because of the heat loss and reduced gas flow near the wall. In this study, a flow is simulated to determine the flow control method for the more uniform flow in all filter layer. By using Star CCM+ commercial software, we obtain local velocity, streamline, and pressure distributions in the filter, which are typically difficult to obtain from measurements. The major control factors are the filter porosity, size and location of the distribution plate, and the number of blades of the swirler. By placing the distribution plate in front of the filter, the flow velocity near the wall was increased. The optimum location and size of the flat plate were chosen. By attaching the blade on the plate the flow velocity near the wall was increased more. Therefore, the regeneration efficiency is increased by using the swirler-type metal fiber DPF system.     

Preview suspension control for a full tracked vehicle

In this study, preview control algorithms for the active and semi-active suspension systems of a full tracked vehicle (FTV) are designed based on a 3-D.O.F model and evaluated. The main issue of this study is to make the ride comfort characteristics of a fast moving tracked vehicle better to keep an operator’s driving capability. Since road wheels almost trace the profiles of the road surface as long as the track doesn’t depart from the ground, the preview information can be obtained by measuring only the absolute position or velocity of the first road wheel. Simulation results show that the performance of the sky-hook suspension system almost follows that of full state feedback suspension system and the on-off semi-active system carries out remarkable performance with the combination of 12 on-off semi-active suspension units. The results simulated with 1^st and 2^nd weighting sets mean that the suspension system combined with the soft type of inner suspension and hard type of outer suspension can carry out better ride comfort characteristics than that with identical suspensions. The full tracked vehicle (FTV) system is uncontrollable and the system is split into controllable and uncontrollable subspace using singular value decomposition transformation. Frequency response curves to four types of inputs, such as heaving, pitching, rolling, and warping inputs, also demonstrate the merits of preview control in ride comfort. All the frequency characteristic responses confirm the continuous time results.     

Multiphysic modelling of railway vehicles equipped with pneumatic suspensions

This article presents a multidisciplinary approach of railway pneumatic suspension modelling: both multibody and pneumatic aspects are taken into account. The work aims at obtaining a realistic model of the secondary suspension and coupling it with a multibody model of a train. Various components of the pneumatic circuit such as bellows, tanks, pipes and valves are taken into account. The article focuses on the bellow-pipe-tank subsystem for which several modelling approaches are presented and compared. Differences between differential and algebraic models are highlighted, and an application-dependent choice between them is suggested. A complete model of the pneumatic circuit is then obtained and coupled with a multibody model of the train. As a result, the behaviour of a suburban train equipped with a pneumatic secondary suspension is analysed, in particular undesired oscillating motions which affect the comfort. Topological modifications and improvements of the suspension are also investigated and discussed.     

三轮摩托车钢板弹簧参数的设计与选择

钢板弹簧做为主要的悬架形式,在三轮车后悬架中得到了广泛应用.目前,对钢板弹簧参数的选取主要依靠经验或借鉴方式获得,不能很好适应不同车型.文中给出了选择钢板弹簧流程表及钢板弹簧参数主要指标和理论计算公式,通过对某型号客车进行钢板弹簧参数计算,并将前后参数进行对比,证明采用的理论公式及方法是可行的.     

Analysis of the capabilities of a two-stage turbocharging system to fulfil the US2007 anti-pollution directive for heavy duty diesel engines

This article presents a two-stage turbocharged heavy-duty diesel (HDD) engine designed to fulfil the US2007 anti-pollution directive. This directive imposes very restrictive limits on the NOx and particle emissions of HDD engines. In this work, the possibility of combining particle traps in the exhaust line to reduce soot emissions with very high EGR rates to reduce NOx emissions is considered. This new generation engine implements two-stage turbocharging in order to improve the bsfc when the engine is working on steady conditions as well as to optimize the engine transient response. After carrying out the tests, the results were analyzed and the engine settings were adjusted to maximise its behaviour and minimise pollutant emissions. NOx and soot emission peaks were also analyzed at engine transient conditions in order to keep them under certain levels, and thus maintain the overall pollutant emissions to a level that is as low as possible. In summary, a double-stage turbocharging configuration can greatly improve engine driveability (between 23% and 36% depending on engine speed), while reducing NOx emissions during transient evolution without increasing opacity peaks beyond the stated limits.     

Thermal design of automobile exhaust based thermoelectric generators: Objectives and challenges

The potential for thermoelectric power generation (via waste heat recovery onboard automobiles) to displace alternators and/or provide additional charging to a vehicle battery pack has increased with recent advances in thermoelectric material processing. In gasoline fueled vehicles (GFVs), about 40% of fuel energy is wasted in exhaust heat, while a smaller amount of energy (30%) is ejected through the engine coolant. Therefore, exhaust-based thermoelectric generators (ETEG) have been a focus for GFV applications since the late 1980s. The conversion efficiency of modern thermoelectric materials has increased more than three-fold in the last two decades; however, disputes as to the thermal design of ETEG systems has kept their overall efficiency at limited and insufficient values. There are many challenges in the thermal design of ETEG systems, such as increasing the efficiency of the heat exchangers (hot box and cold plate), maintaining a sufficient temperature difference across the thermoelectric modules during different operating conditions, and reducing thermal losses through the system as a whole. This paper focuses on a review of the main aspects of thermal design of ETEG systems through various investigations performed over the past twenty years. This paper is organized as follows: first, the construction of a typical ETEG is described. The heat balance and efficiency of ETEG are then discussed. Then, the third section of this paper emphasizes the main objectives and challenges for designing efficient ETEG systems. Finally, a review of ETEG research activities over the last twenty years is presented to focus on methods used by the research community to address such challenges.