Effects of Heat Intensity and Inflow Wind on the Reactive Pollution Dispersion in Urban Street Canyon

This paper investigates the impacts of heating intensity and inflow wind speed on the characteristics of reactive pollutant dispersion in street canyons using the computational fluid dynamic (CFD) model that includes the transportation of NO, NO₂, and O₃ coupled with NO-NO₂-O₃ photochemistry. The results indicated that the heat intensity and inflow wind speed have a significant influence on the flow field, temperature field and the characteristics of reactive pollutant dispersion in and above the street canyon. With the street canyon bottom heating intensity increasing, NO, NO₂ and O₃ concentrations in street canyon are decreased. The O₃ concentration reductions are even more than the NO and NO₂ concentrations. Improving the inflow wind speed can significantly reduce the NO and NO₂ concentrations within street canyons. But the O₃ concentrations have a slight rise with wind speed increasing. The results would be useful for understanding the interrelation among reactive vehicle emissions, and provide references for urban planners.     

Research on Spatially Adaptive High-Order Total Variation Model for Weak Fluorescence Image Restoration

Photoacoustic imaging acquires the absorption contrast of biological tissue with ultrasound resolution. It has been broadly investigated in biomedicine for animal and clinical studies. Recently, a micro-electro-mechanical system (MEMS) scanner has been utilized in photoacoustic imaging systems to enhance their performance and extend the realm of applications. The review provides a recap of recent developments in photoacoustic imaging using MEMS scanner, from instrumentation to applications. The topics include the design of MEMS scanner, its use in photoacoustic microscopy, miniature imaging probes, development of dual-modality systems, as well as cutting-edge bio-imaging studies.     

Estimation of Load-Induced Damage and Repair Cost in Post-Tensioned Concrete Rocking Walls

Post-tensioned concrete rocking walls might be used to avoid severe seismic damage at the base of structural walls, decrease residual drift, and lessen post-earthquake repair costs. The prediction of load-induced damage to the rocking wall resulting from seismic loading can provide an extremely valuable tool to evaluate the status and safety of structural concrete walls following earthquakes. In this study, the behavior and the damage state of monolithic, self-centering, rocking walls, as a new type of concrete rocking wall, are investigated. The nonlinear mechanical behavior of the wall is first modeled numerically, and subsequently the mechanical parameters from the numerical simulation are used to generate the local damage index. The results from the damage index model are compared with the full-scale test results, confirming the viability of the numerically based damage index method for estimating the seismically induced damage in concrete walls. Moreover, the estimated damage can be utilized as a qualitative and quantitative scale to assess the status of the wall following seismic loading events. Finally, an equation is proposed to estimate the repair cost based on the predicted damage state for the studied structural system.     

A Discrete Bat Algorithm for Disassembly Sequence Planning

Based on the bat algorithm (BA), this paper proposes a discrete BA (DBA) approach to optimize the disassembly sequence planning (DSP) problem, for the purpose of obtaining an optimum disassembly sequence (ODS) of a product with a high degree of automation and guiding maintenance operation. The BA for solving continuous problems is introduced, and combining with mathematical formulations, the BA is reformed to be the DBA for DSP problems. The fitness function model (FFM) is built to evaluate the quality of disassembly sequences. The optimization performance of the DBA is tested and verified by an application case, and the DBA is compared with the genetic algorithm (GA), particle swarm optimization (PSO) algorithm and differential mutation BA (DMBA). Numerical experiments show that the proposed DBA has a better optimization capability and provides more accurate solutions than the other three algorithms.     

Product Quality Evaluation Method Based on Product Gene Theory

Traditional quality inspection based product quality evaluation method with complex process has high operating cost and requires more professional knowledge. To remove the above limitation, this paper leads product gene theory into product quality evaluation. Methods of quality influencing factors based modeling and encoding are established. Combined with similarity theory and product gene theory, a product gene similarity analysis based quality evaluation method is proposed. The proposed method is low cost, operates easily and requires less specialized knowledge. A case study is conducted to prove the correctness and feasibility of this method.     

Experimental study on the impact characteristics of a sandwich composite with an aluminum foam core

The need for composites has been increasing in various industries because composites have good mechanical properties for their weight and superior stiffness and strength. The composites addressed in this study were multi-pore aluminum foam with a specific gravity of 1/10 composed of solid aluminum metal. This composite has excellent impact energy-absorption capability. In this study, impact tests on an aluminum foam core sandwich composite with a porous core were conducted to examine its mechanical properties. The specimen was a sandwich structure with an aluminum foam core, and different impact energies, such as 50J, 70J, and 100J, were applied to the specimen. Consequently, a maximum load of 5.5 kN occurred when the striker penetrated the upper face sheet in all experiments. The maximum load occurred at 4.2 ms for 50J, 3.5 ms for 70J, and 3.0 ms for 100J, indicating that the greater the impact energy was, the shorter the time was until the maximum load. After the maximum load occurred, that is, after the penetration of the upper face sheet, the striker penetrated 10 mm further, causing the core to be damaged in the 50J test, while the lower face sheet remained intact. In the 70J test, the striker penetrated the core and caused damage to the upper face sheet at 10 ms. Finally, in the 100J test, the striker penetrated both the upper face sheet and core and even the lower face sheet at 10 ms. Given the result above, the maximum load occurred when the striker penetrated the upper face sheet and the sandwich composite with aluminum foam core; the load then gradually decreased and then rapidly increased when the striker reached the lower face sheet, and the maximum load lasted slightly longer than the time required for the upper face sheet to be penetrated.     

沥青混合料级配曲线研究进展

级配曲线是由富勒模型中最大粒径和形状系数两个参数来确定的,富勒模型能够很好地拟合使用性能良好的级配.级配曲线图是由形状系数和最大粒径组成的直角坐标系,它可以表示出级配范围、砂石比和相关的性能参数.该文分析了Superpave沥青混合料力学和水稳性能的试验结果,提出了根据级配曲线推荐的集料设计出满足路面各项性能的自由设计理念.     

不同加载幅值下考虑层间界面条件和侧向剪力作用的柔性铺面响应

该文进行了一个三维有限元参数量化的粘弹性路面响应研究,由于不同的轮胎配置:双轮和宽基轮胎在3种温度(5、25和40℃)和两种速度(8、72 km/h);还有影响路面响应的3种因素:移动车轮荷载幅值(连续,梯形),层间界面条件(简单的摩擦和粘弹性模型)和横向力共同对路面响应的影响进行了研究.研究发现连续加载幅值,不但可以模拟路面对运动轮荷载的响应,并且是一种比目前使用的梯形荷载幅值更准确的研究模型.粘弹性模型极大地提高了双轮胎对预测路面的响应,而简单的摩擦模型更接近宽基轮胎的实地测量.侧向剪力是积极改善预测轮底的表面磨损和底部热拌沥青(沥青)基层的较小程度上的应变.研究表明:使用连续加载幅值和非均匀压力分布模拟移动轮,侧向剪切力和适当的界面摩擦可显著改善有限元模型对车辆加载路面响应的预测能力.     

Overview of past, present and future marine power plants

In efforts to overcome an foreseeable energy crisis predicated on limited oil and gas supplies, reserves; economic variations facing the world, and of course the environmental side effects of fossil fuels, an urgent need for energy sources that provide sustainable, safe and economic supplies for the world is imperative. The current fossil fuel energy system must be improved to ensure a better and cleaner transportation future for the world. Despite the fact that the marine transportation sector consumes only 5% of global petroleum production; it is responsible for 15% of the world NO _x and SO _x emissions. These figures must be the engine that powers the scientific research worldwide to develop new solutions for a very old energy problem. In this paper, the most effective types of marine power plants were discussed. The history of the development of each type was presented first and the technical aspects were discussed second. Also, the fuel cells as a new type of power plants used in marine sector were briefed to give a complete overview of the past, present and future of the marine power plants development. Based on the increased worldwide concerns regarding harmful emissions, many researchers have introduced solutions to this problem, including the adoption of new cleaner fuels. This paper was guided using the same trend and by implementing the hydrogen as fuel for marine internal combustion engine, gas turbines, and fuel cells.     

矩形槽道采用不同冷却介质的传热与阻力特性分析(英文)

Several industrial applications such as electronic devices,heat exchangers,gas turbine blades,etc.need cooling processes.The internal cooling technique is proper for some applications.In the present work,computational simulations were made using ANSYS CFX to predict the improvements of internal heat transfer in the rectangular ribbed channel using different coolants.Several coolants such as air,steam,air/mist and steam/mist were investigated.The shear stress transport model(SST)is selected by comparing the standard k-ωand Omega Reynolds Stress(ωRS)turbulence models with experimental results.The results indicate that the heat transfer coefficients are enhanced in the ribbed channel while injecting small amounts of mist.The heat transfer coefficients of air/mist,steam and steam/mist increase by 12.5%,49.5%and 107%over that of air,respectively.Furthermore,in comparison to air,the air/mist heat transfer coefficient enhances by about 1.05 to 1.14 times when the mist mass fraction increases from 2%to 8%,respectively.The steam/mist heat transfer coefficient increases by about 1.12 to 1.27 times higher than that of steam over the considered range of mist mass fraction.