Active regulation of battery charge-sustaining in ECMS: Application in energy management for engine waste heat recovery system

Equivalent consumption minimization strategy (ECMS) is a widely used energy management method in the battery equipped bio-sources energy system, in which an equivalence factor is adopted to weigh the two kinds of energy, usually fuel and electricity. The regulation of the equivalence factor will affect not only the fuel consumption but also the battery's state of charge (SOC) sustainability, which results great influence upon the energy management of the system. In this paper, a new perspective of treating the relationship between the equivalence factor and instantaneous fuel consumption as well as instantaneous electricity consumption as a first-order dynamic system is proposed, thus the relationship between the equivalence factor and SOC is deduced as a second-order dynamic system. Based on the perspective, a linear second-order Active Disturbance Rejection Control (ADRC) is employed to regulate the equivalence factor, which can estimate and compensate, in real-time, disturbances in the system from input-output information only. An engine waste heat recovery energy network constructed by <engine> - <power turbine> - <Organic Rankine Cycle System> - <electric cooling system> - <battery> - <Integrated starter and Generator> is selected as the research object, simulation verifications upon 11 different driving cycles based on the simulation platform established by GT-SUITE software are conducted to test the fuel-saving capability and SOC self-sustainability by the proposed approach with a same set of tuning parameters. Simulation results indicate that both the fuel-saving capability and the SOC self-sustainability can be ensured by the active control of equivalent factor with a same set of tuning parameters upon all the 11 driving cycles, demonstrating a great adaptability of the control parameters.     

Directed proxy signature in the standard model

A directed signature is a type of signature with restricted verification ability. Directed signatures allow only a designated verifier to check the validity of the signature issued to him, and at the time of trouble or if necessary, any third party can verify the signature with the help of the signer or the designated verifier. Directed signature schemes are widely used in situations where the receiver’s privacy should be protected. Proxy signatures allow an entity to delegate its signing capability to another entity in such a way that the latter can sign message on behalf of the former when the former is not available. Proxy signature schemes have found numerous practical applications such as distributed systems and mobile agent applications. In this paper, we firstly define the notion of the directed proxy signature by combining the proxy signature and directed signature. Then, we formalize its security model and present a concrete scheme in the standard model. Finally, we use the techniques from provable security to show that the proposed scheme is unforgeable under the gap Diffie-Hellman assumption, and invisible under the decisional Diffie-Hellman assumption.     

Guaranteed Cost Iterative Learning Control for Multi-Phase Batch Processes

Batch process is a typical multi-phase process. Due to the interaction between the phases of the batch process, high precision control in a single phase cannot guarantee high precision control of the whole batch process. In order to solve this problem, the guaranteed cost iterative learning control (ILC) of multi-phase batch processes is studied in this paper. Firstly, through introducing the output error, the state error and the extended information, the multi-phase batch process is transformed into an equivalent 2D switched system which has different dimensions. In addition, under the measurable condition, the guaranteed cost iterative learning control law with extended information is designed. The proposed control law ensures not only the stability of the system but also the optimal control performance. Next, in order to study the stability of the system and the minimum running time under the condition of stable running, the multi-Lyapunov function method is used. By means of the average dwell time method, the sufficient conditions ensuring system to be exponentially stable are given in the form of linear matrix inequality (LMI). Finally, the injection molding process is taken as an example to make simulation, which shows the feasibility and effectiveness of the proposed method.     

How much can trip chaining reduce VMT? A simplified method

Trip chaining represents a way to reduce vehicle miles traveled (VMT) that does not require people to shift away from driving private automobiles. While the existing literature on trip chaining acknowledges this potential, little has been done by way of quantifying this. This research seeks to fill this gap by using a large travel survey from the San Francisco Bay area to model the VMT generated by automobile tours as a function of tour composition (i.e., the number and type of destinations on that tour). The model results indicate that many tours involving trips chains (i.e., those tours with more than one destination) generate significantly less VMT than would occur if the destinations in these tours were split into multiple tours with single destinations. Tours that combine a work and non-work destination (which are the most common types of trip chains) particularly demonstrate potential for VMT reduction. Adding a non-work destination to a work tour is usually (depending on the specific type of destination) predicted to result in a reduction of 6–11 VMT, or about 20–30 %. Adding two non-work destinations to a work tour is usually predicted to result in a reduction of 10–22 VMT, or about 25–50 %.     

Trade-off in optimizing energy consumption and end user quality of experience in radio access network

To reduce network access latency, network traffic volume and server load, caching capacity has been proposed as a component of evolved Node B (eNodeB) in the ratio access network (RAN). These eNodeB caches reduce transport energy consumption but lead to additional energy cost by equipping every eNodeB with caching capacity. Existing researches focus on how to minimize total energy consumption, but often ignore the trade-off between energy efficiency and end user quality of experience, which may lead to undesired network performance degradation. In this paper, for the first time, we build an energy model to formulate the problem of minimizing total energy consumption at eNodeB caches by taking a trade-off between energy efficiency and end user quality of experience. Through coordinating all the eNodeB caches in the same RAN, the proposed model can take a good balance between caching energy and transport energy consumption while also guarantee end user quality of experience. The experimental results demonstrate the effectiveness of the proposed model. Compared with the existing works, our proposal significantly reduces the energy consumption by approximately 17% while keeps superior end user quality of experience performance.     

Thermal Transport in Nanoporous Yttria-Stabilized Zirconia by Molecular Dynamics Simulation

Yttria-stabilized zirconia (YSZ) is widely used as thermal barrier coatings (TBCs) to reduce heat transfer between hot gases and metallic components in gas-turbine engines. Porous structure can generally reduce the lattice thermal conductivity of bulk material, so porous YSZ can be potentially used as TBCs with better thermal performance. In this work, we investigate the thermal conductivity of nanoporous YSZ using the nonequilibrium molecular dynamics (NEMD) simulation, and comprehensively discuss the effects of cross-sectional area, pore size, structure length, porosity, Y₂O₃ concentration and temperature on the thermal conductivity. To compare with the results of the NEMD simulation, we solve the heat diffusion equation and the gray Boltzmann transport equation (BTE) to calculate the thermal conductivity of the same porous structure. From the results, we find that the thermal conductivity of YSZ has a weak dependence on the structure length at the length range from 10 to 26 nm, which indicates that the majority of heat carriers have very short mean free path (MFP) but there exists small percentage (about 3%) of phonons with longer MFP (larger than 10 nm) contributing to the thermal conductivity. The thermal conductivity predicted by NEMD simulation is smaller than that of solving heat diffusion equation (diffusive limit) with the same porous structure. It shows that the presence of pores affects phonon scattering and further affects the thermal conductivity of nanoporous YSZ. The results agree well with the solution of gray BTE with a average MFP of 0.6 nm. The thermal conductivity of nanoporous YSZ weakly depends on the Y₂O₃ concentration and temperature, which shows the phonons with very short MFP play the major contribution to the thermal conductivity. The results help to better understand the heat transfer in porous YSZ structure and develop better TBCs.     

The existence of an equilibrium solution to the traffic assignment problem when there are junction interactions

We consider a network with interactions and capacity constraints at each junction. We give conditions on the interactions and constraints which, if satisfied at each separate junction, ensure that any feasible assignment problem has an equilibrium solution. Two illustrative examples are provided; the first arises naturally and does not satisfy our conditions, while the second does satisfy our conditions but is somewhat unnatural.     

Coordinated collision avoidance for connected vehicles using relative kinetic energy density

Vehicular collision often leads to serious casualties and traffic congestion, and the consequences are worse for multiple-vehicle collision. Many previous works on collision avoidance have only focused on the case for two consecutive vehicles using on-board sensors, which ignored the influence on upstream traffic flow. This paper proposes a novel coordinated collision avoidance (CCA) strategy for connected vehicles, which has potential to avoid collision and smooth the braking behaviors of multiple vehicles, leading to an improvement of traffic smoothness. Specifically, model predictive control (MPC) framework is used to formulate the CCA into an optimization problem, where the objective is to minimize the total relative kinetic energy density (RKED) among connected vehicles. Monte Carlo simulations are used to demonstrate the effectiveness of proposed CCA strategy by comparison with other two strategies. Among all the three control strategies, the RKED based control strategy shows the best performance of collision avoidance, including the best crash prevention rates (99.2 % on dry asphalt road and 90.5 % on wet asphalt road) and the best control of distance headways between vehicles.     

The adaptation of the Polish shipping companies to market conditions

At the end of the eighties, fundamental changes took place in Polish shipping. Implementation of the market economy system was at first demonstrated in the introduction of the principles of self-dependence, self-government and self-financing of the shipping companies. Privatization performed a key role in the program of transformation of the centrally planned system into market oriented financially independent shipping organizations. The previous principle of the necessary participation of the home fleet in transporting domestic sea-borne trade has been mostly replaced by cross-trade. Many shipping services have left its basic ports in the country for a West European basis, securing alimentation of home and transit cargoes by feeder–service systems. Joint stock companies in shipping with substantial shares of foreign capital are welcomed, and the previously obligatory system of administrative methods of the state monopoly has been abolished. The principles of shipping policy represented in the past by Poland and also by UNCTAD in the 1960s have lost their impact and must be change and adapted to the new demands of the shipping markets.