Quantifying the benefit of responsive pricing and travel information in the stochastic congestion pricing problem

This paper is concerned with roadway pricing amidst the uncertainty which characterizes long-term transportation planning. Uncertainty is considered both on the supply-side (e.g., the effect of incidents on habitual route choice behavior) and on the demand-side (e.g., due to prediction errors in demand forecasting). The framework developed in this paper also allows the benefits of real-time travel information to be compared directly against the benefits of responsive pricing, allowing planning agencies to identify the value of these policy options or contract terms in publicly-operated toll roads. Specifically, six scenarios reflect different combinations of policy options, and correspond to different solution methods for optimal tolls. Demonstrations are provided on both the Sioux falls and Anaheim networks. Results indicate that providing information to drivers implemented alongside responsive tolling may reduce expected total system travel time by over 9%, though more than 8% of the improvement is due to providing information, with the remaining 1% improvement gained from responsive tolling.     

Design and implementation of efficient transit networks: Procedure, case study and validity test

This paper presents and tests a method to design high-performance transit networks. The method produces conceptual plans for geometric idealizations of a particular city that are later adapted to the real conditions. These conceptual plans are generalizations of the hybrid network concept proposed in Daganzo (2010). The best plan for a specific application is chosen via optimization. The objective function is composed of analytic formulae for a concept’s agency cost and user level of service. These formulae include as parameters key demand-side attributes of the city, assumed to be rectangular, and supply-side attributes of the transit technology. They also include as decision variables the system’s line and stop spacings, the degree to which it focuses passenger trips on the city center, and the service headway. These decision variables are sufficient to define an idealized geometric layout of the system and an operating plan. This layout-operating plan is then used as a design target when developing the real, detailed master plan. Ultimately, the latter is simulated to obtain more accurate cost and level of service estimates.This process has been applied to design a high performance bus (HPB) network for Barcelona (Spain). The idealized solution for Barcelona includes 182 km of one-way infrastructure, uses 250 vehicles and costs 42,489 €/h to build and run. These figures only amount to about one third of the agency resources and cost currently used to provide bus service. A detailed design that resembles this target and conforms to the peculiarities of the city is also presented and simulated. The agency cost and user level of service metrics of the simulated system differ from those of the idealized model by less than 10%. Although the designed and simulated HPB systems provide sub-optimal spatial coverage because Barcelona lacks suitable streets, the level of service is good. Simulations suggest that if the proposed system was implemented side-by-side with the current one, it would capture most of the demand.     

A regression on climate policy: The European Commission’s legislation to reduce CO2 emissions from automobiles

As part of its efforts to reach the targets of the Kyoto Protocol, in April 2009 the European Commission enacted new legislation to reduce the per-kilometer CO₂ emissions of newly registered automobiles. This paper critically assesses this legislation with respect to its economic and technological underpinnings. First, we argue that the reliance on targets based on per-kilometer emissions not only conceals the true cost of compliance and thereby stifles informed public discourse, but is also less cost-effective than alternative measures such as emissions trading. Second, the emission targets stipulated in this legislation are based on linear-regression methods that we demonstrate to be poorly justified and misleading. Using instead stochastic-frontier analysis, which is argued to more accurately reflect the industry’s technological status quo, alternative targets are consequently proposed.     

Anticipating new-highway impacts: Opportunities for welfare analysis and credit-based congestion pricing

Pricing of roadways opens doors for infrastructure financing, and congestion pricing seeks to address inefficiencies in roadway operations. This paper emphasizes the revenue-generation opportunities and welfare impacts of flat-tolling schemes, standard congestion pricing, and credit-based congestion pricing policies. While most roadway investment decisions focus on travel time savings for existing trips, this work turns to logsum differences (which quantify changes in consumer surplus) for nested logit specifications across two traveler types, two destinations, three modes and three times of day, in order to arrive at welfare- and revenue-maximizing solutions. This behavioral specification is quite flexible, and facilitates benefit-cost calculations (as well as equity analysis), as demonstrated in this paper.The various cases examined suggest significant opportunities for financing new roadway investment while addressing congestion and equity issues, with net gains for both traveler types. Application results illustrate how, even after roadway construction and maintenance costs are covered, receipts may remain to distribute to eligible travelers so that typical travelers can be made better off than if a new, non-tolled road had been constructed. Moreover, tolling both routes (new and old) results in substantially shorter payback periods (5 versus 20 years) and higher welfare outcomes (in the case of welfare-maximizing tolls with credit distributions to all travelers). The tools and techniques highlighted here illustrate practical methods for identifying welfare-enhancing and cost-recovering investment opportunities, while recognizing multiple user classes and appropriate demand elasticity across times of day, destinations, modes and routes.     

URANS simulations of static and dynamic maneuvering for surface combatant: part 1. Verification and validation for forces, moment, and hydrodynamic derivatives

Part 1 of this two-part paper presents the verification and validation results of forces and moment coefficients, hydrodynamic derivatives, and reconstructions of forces and moment coefficients from resultant hydrodynamic derivatives for a surface combatant Model 5415 bare hull under static and dynamic planar motion mechanism simulations. Unsteady Reynolds averaged Navier–Stokes (URANS) computations are carried out by a general purpose URANS/detached eddy simulation research code CFDShip-Iowa Ver. 4. The objective of this research is to investigate the capability of the code in regards to the computational fluid dynamics based maneuvering prediction method. In the current study, the ship is subjected to static drift, steady turn, pure sway, pure yaw, and combined yaw and drift motions at Froude number 0.28. The results are analyzed in view of: (1) the verification for iterative, grid, and time-step convergence along with assessment of overall numerical uncertainty; and (2) validations for forces and moment coefficients, hydrodynamic derivatives, and reconstruction of forces and moment coefficients from resultant hydrodynamic derivatives together with the available experimental data. Part 2 provides the validation for flow features with the experimental data as well as investigations for flow physics, e.g., flow separation, three dimensional vortical structure, and reconstructed local flows.     

An overview of biodiesel in Asian countries and the harmonization of quality standards

Recently, biofuels have been actively introduced as transportation fuels in Asian countries. Common drivers to use biofuels are energy security, fuel diversification, and the reduction of greenhouse gases. In addition, some Southeastern Asian countries look forward to utilizing the abundant agricultural resources and providing stability for farmers. However, a compromised quality of biofuels could cause vehicle trouble, which is why the quality standard of the fuels is very important. On the other hand, the quality standard of biofuels differs from country to country and could cause vehicle trouble in some countries and not others. These differing standards may become an obstacle to trade. In this situation, the harmonization of the biodiesel standards in the East Asia Summit (EAS) region has been initiated by the ERIA biodiesel working group, in which members are the specialists from each country. This review summarizes the introduction of biofuels in this region and the recent activities regarding the harmonization of the fuel quality standard. Important background for this review is based on the results of the ERIA biodiesel working group meeting.     

Non-linear dynamic simulation of gear response under the idling condition

A dynamic lumped-parameter gear model incorporating the effects of a time-varying and asymmetric mesh stiffness and a backlash nonlinearity is formulated to analyze the spur gear rattle response under the idling condition. The proposed theory assumes a rectangular time-varying mesh stiffness function. The phase shift between the mesh stiffness for forward and backward contacts is examined. Numerical studies are employed to examine the effects of engine torque fluctuations and tooth surface friction on the gear rattle response and the corresponding tooth impact behavior. Comparisons between the results from the time-invariant mesh stiffness model and the proposed time-varying mesh stiffness model reveal differences in the gear responses, especially when the mean rotational speed of the fluctuating gear pair is non-zero. The analysis reveals significant effects on the high frequency response components. However, the idling gear dynamics are relatively insensitive to tooth surface friction.     

Driver recognition of a run-over accident

If a driver passes over a pedestrian lying on the road and flees, it is considered a crime. In several cases, even if the driver fled and was arrested, he/she often asserts that they did not know that the victim was a human being. However, the investigation agency often believes that a driver can certainly recognize when he/she passes over a person. Accordingly, such cases frequently lead to disputes due to the lack of criteria for recognizing when a driver was involved in run-over accidents. In this study, tests were conducted both to identify if drivers can recognize whether their vehicles passed over a person and to examine how they feel at the time. A silicon dummy, which was manufactured to have the same characteristic as the human chest, was used in this study. According to the method specified in ISO2631, the vibration delivered to the driver was measured, and eighteen participants drove a vehicle over the silicon dummy to experience how the vibrations felt. When the passenger car for the test ran over the dummy at speeds ranging from 10 km/h to 60 km/h, all participants recognized the delivered vibration, and the VDV that was delivered to the participants ranged from 1.81 m/s ^1.75 to 2.38 m/s ^1.75. The participants thought that the object they drove over was a stone or a piece of wood. This indicates that the driver certainly can recognize the vibrations generated from passing over a human chest even though it feels like a solid object.