Design of propeller geometry using streamline-adapted blade sections

We refine the geometry of a propeller by modifying the blade sections to align them with surface streamlines, obtained by the panel method. Redefinition of the blade sections aligned with the streamlines is provided together with surface modeling scheme by which model propellers were built. Numerical simulations and open-water tests on models suggest a possible increase of 1% in propeller efficiency.     

Multimodal route choice in maritime transportation: the case of Korean auto-parts exporters

Global offshoring has increased the need for transport of half-finished goods and components, along with finished goods. The auto-parts industry in Korea has also entered the global market as Korean car manufacturers have started to build overseas factories. Maintaining cost competitiveness by minimising total logistics costs will thus be a critical strategy for the industry. This research compares the total annual costs of four feasible transport routes from Korea to the US using the inventory-theoretic model, which encompasses direct transport costs, in-transit carrying costs, and warehouse inventory costs. We apply this model to real transport data collected from a Korean auto-parts company. A static analysis shows that inventory costs can play a decisive role in altering the cost competitiveness of different routes. In addition, sensitivity and scenario analyses with changes in variables and the market situations reveal that the cost structure of each route plays an important role in determining their relative cost competitiveness in varying market conditions.     

Hydro- and aerodynamic analysis for the design of a sailing yacht

The results of the design analysis for a sailing yacht’s hull and sails are reported. The results were used to confirm the design of a 30 ft long sloop, which was planned, designed, and built in Korea for the first time in history. Flows around a sailing yacht above and under the free surface were analyzed separately using both computational and experimental methods. For the underwater flow analysis, turbulent flow simulations with and without free surface wave effects were carried out for the canoe hull with keel/rudder. The computed drag and side forces on the hull model were compared with the measurement data obtained from the towing tank experiments. In order to assess the sail performance, another set of computations was carried out for the flow around a sail system composed of main and jib sails with a mast. The present study demonstrates that, for the design analysis of a sailing yacht, computational fluid dynamics techniques can be utilized with a reasonable level of confidence.     

A study of fatigue crack propagation at a web stiffener on a longitudinal stiffener

Predicting fatigue crack growth after its detection during in-service inspection is necessary to prevent a loss of serviceability, such as the oil and/or water tightness of critical compartments. This paper focuses on the most typical fatigue cracks that start at the weld joint between a flat bar stiffener on a transverse web frame and the flange of a longitudinal stiffener on a bottom plate or inner bottom plate. An experiment is carried out to observe the fatigue crack propagation for two kinds of flat bars at the abovementioned connection. The experimental results, especially the surface crack growth on the flange (which dominates during the total fatigue life of the longitudinal stiffener), are compared with crack growth curves predicted using a few existing formulas. Based on the comparative study, a formula that shows the best agreement with the experiment results is selected. Weld toe magnification factors for the web stiffener are computed from the crack propagation rates measured in the experiment, and two equations for the magnification factors versus crack depth are developed for two types of web stiffeners. The selected existing formula and the proposed equations are applied to two connections at the inner bottom and side longitudinal bulkhead of an LNG carrier. The equivalent stress approach based on a long-term distribution is employed to avoid the complexity involved in dealing with the actual stress history. Using this prediction, the remaining service life until an oil or water leakage occurs at a tank boundary can be estimated when a fatigue crack at the connection is detected.     

Using the Ecopath with Ecosim Modeling Approach to Understand the Effects of Watershed-based Management Actions in Coastal Ecosystems

Resource managers are often tasked with identifying and assessing the potential impacts of management actions on the biotic communities under their care. When the management activities directly influence a single species of interest, managers can turn to a variety of models to aid in their understanding of potential changes to that population. However, as ecosystem-based management becomes more widely accepted, managers will have to understand how proposed actions will impact entire biotic communities, through both direct and indirect mechanisms. Thus, there is a need for ecosystem models that account for both trophic and non-trophic interactions, and that can be relatively easily used to assess a variety of management scenarios. We reviewed the available literature regarding incorporation of eutrophication and other anthropogenic impacts into Ecopath with Ecosim (EwE), one of the more widely used trophic ecosystem modeling frameworks. We found that a number of mechanisms of varying complexity have been used to include these stressors in models, providing managers with a suite of options that can be used to complement their existing management options as they seek to understand the impacts of human interactions on the natural environment.     

Effect of bed vicinity on vortex shedding and force coefficients of fluid flow on an offshore pipeline

The effect of rigid bed proximity on flow parameters and hydrodynamic loads in offshore pipelines exposed to turbulent flow is investigated numerically. The Galerkin finite volume method is employed to solve the unsteady incompressible 2D Navier–Stokes equations. The large eddy simulation turbulence model is solved using the artificial compressibility method and dual time-stepping approach. The proposed algorithm is developed for a wide range of turbulent flows with Reynolds numbers of 9500 to 1.5×10⁴. Evaluation of the developed numerical model shows that the proposed technique is capable of properly predicting hydrodynamic forces and simulating the flow pattern. The obtained results show that the lift and drag coefficients are strongly affected by the gap ratio. The mean drag coefficient slightly increases as the gap ratio increases, although the mean lift coefficient rapidly decreases. The vortex shedding suppression happen at the gap ratio of less than 0.2.     

Marine Protected Areas in the Canadian Pacific: Do They Fulfill Network Criteria?

As a signatory to the Convention on Biological Diversity, Canada has committed to establishing a network of marine protected areas (MPAs) that effectively conserves at least 10% of coastal and marine areas by 2020. Research shows that the most effective MPAs are large, well enforced, no-take, and designed as part of a network. Canada's Pacific MPAs, designated site-by-site, cover approximately 3% of Canadian Pacific waters. We investigated how these MPAs could effectively contribute to Canada's national network by analyzing the implementation of management intent through the application of fisheries closures and conducting a preliminary assessment of their size and spacing relative to scientific guidelines. Fisheries closures outside of MPAs were similarly assessed. Results showed that 90% of existing MPAs were intended to exclude commercial fishing, yet only 2.5% fully or partially met this goal, therefore management intent was not achieved. Further, existing MPAs were small, 75% less than 10 km² in size, but were reasonably spaced, from one to 50 km apart. While a suite of fisheries closures may be better suited to effectively contribute to a network than MPAs without fisheries closures, they would require permanent designations and management plans to meet network inclusion criteria.     

Design of a signal transducer for direct conversion of wheel linear accelerations into tire lateral forces

This paper describes a design of a real-time conversion system of wheel linear accelerations into tire lateral forces. Though the tire lateral forces are important elements for analyzing vehicle dynamic control performances, they cannot be easily measured in real-time owing to the non-linearities of tire dynamics, friction, and slippage on road. In this paper, we propose a practical direct method using wheel linear accelerations in order to estimate tire lateral forces transmitted into the vehicle in real-time. A simplified vehicle model based on force-acceleration analysis is proposed to assure the real-time performance. The acceleration values are obtained using three-axis accelerometers attached on each wheel location. For conditioning and rectifying the acceleration signals, a signal transducer is designed using a digital filter. And in order to investigate the feasibility and real-time performance, a prototype of signal transducer is fabricated using a digital signal processor. The experimental results and performance are validated with the road test results using six-component wheel force transducers.     

Sheet metal forming simulation considering die deformation

Due to environmental concerns and safety regulations in the automotive industry, the development of strong and lightweight cars has been a hot issue in the last decade. One solution for this purpose would be to use high-strength steel (HSS) and advanced high-strength steel (AHSS). These materials can make the car lighter while maintaining the crash resistance of the vehicle. HSS and AHSS have more resistance force in the die structure compared with conventional steel due to their higher yield and tensile strength and thus, these materials have a greater effect on die deformation during the sheet metal forming process. As a result, die deformation can affect the blank sheet’s drawn pattern, strain, and stress as well as springback. This study presents a sheet metal forming simulation that considers die deformation. The simulation process was compared with conventional simulation methods. Our results indicate that the sheet metal forming simulation with die deformation consideration provides useful information on the die structure as well as formability and springback.     

Fuel consumption parameters for realizing and verifying fuel consumption prospect algorithm of vehicle driving route information system

Emissions of CO₂, as the main component of greenhouse gases, and high fuel consumption rates are worldwide problems. To solve them, most car manufacturers have concentrated on developing various techniques to improve the efficiencies of engines and transmissions and ECO-ROUTEs to meet environmental regulations. In this study, an algorithm for determining routes that cause the least fuel consumption was developed. The core of this algorithm is a specific EEC (energy efficiency constant) map containing logic that is able to predict fuel consumption. The accuracy of the algorithm was confirmed by vehicle tests for various driving patterns. Parameters affecting vehicle fuel economy were studied and verified. Improvement in the accuracy of this algorithm was confirmed by applying these parameters to ECO-ROUTE logic.