Automatic FE modeler using stiffener-based mesh generation algorithm for ship structural analysis

Shipbuilding industries have started to employ 3D CAD systems to integrate all design and production processes by achieving seamless data transfer and data sharing. The emerging 3D CAD system brings a considerable change in FE analysis field. The availability of 3D geometry increased the recognition of the need for developing automatic FE modeling system consequently.

However, general automatic mesh algorithms developed by academic research field have a limitation. The difficulty in satisfying lots of line constraints and the absence of proper idealization of 3D geometry entities defined in CAD system hinders directly employing the general mesh algorithms.

In this research, an automatic FE modeling system has been developed for cargo hold FE modeling and whole ship FE modeling. The basic concept of the algorithm is to decompose surfaces using stiffener lines into subregions and generate mesh using a rule established based on FE modeling practice of ship structure. Since the decomposed subregions take simple polygon, they can be easily transformed into elements by decomposing the polygon according to the rule defined considering the shape of the polygon and mesh seed on its perimeter. The algorithm is also designed to treat appropriate geometry idealizations for bracket-type surface and stiffener connections. The idealization process is also completely customized based on FE modeling practice. The validity of the developed system is verified through illustrative examples.     

Wheel Slip Control in Traction Control System for Vehicle Stability

Traction control systems are used to prevent wheel slippage and to maximize traction forces. This paper proposes a new scheme to enhance vehicle lateral stability with a traction control system during cornering and lane changes. This scheme controls wheel slip during cornering by varying the slip ratio as a function of the slip angle. It assumes that a traction control system with the engine throttle angle is used. The scheme is dynamically simulated with a model of front-wheel-driven passenger vehicles. Simulation results show that the proposed scheme is robust and superior to a conventional one, which is based upon fixed slip ratios, during cornering and lane changes.     

Improving the Performance of Loop-Sensor-Based Traffic-Information System by (M+PLL) Circuit

Conventionally a phase-shift detection method (PSDM) and a frequency-shift detection method (FSDM) have been used in loop detectors. The PSDM has a fast response time and is very effective in detecting vehicles traveling at normal speeds. However, it is well known that the detection results are erroneous for vehicles traveling at low speeds in heavy traffic conditions. On the other hand, the FSDM greatly improves the detector performance for heavy traffic conditions. However, this method is not effective in fast and normal traffic conditions. Thus, in order to collect accurate traffic data for all traffic conditions, this paper proposes combining two methods using the digital OR logic. In the developed circuit, a phase-locked loop (PLL) circuit is used for measuring the phase change. This paper also develops a new loop detector instrumentation method using the so-called M circuit for detecting frequency change. The developed method has been tested for various traffic conditions. Experimental results show that the new combined M and PLL detection method greatly improves the accuracy in all traffic conditions, reducing the error rate in measuring traffic flow by more than 83%, when compared to the PSDM.     

The estimation of wave elevation and wave disturbance caused by the wave orbital motion of a fully submerged hydrofoil craft

The current control system of a fully submerged hydrofoil craft has manual input of fore-foil depth and control mode selection to improve the performance of the control system. However, the manual input needs skillful human operation and observation of waves the encountered to work well over a wide range of waves. In order to use information about the waves encountered in the control system, we considered the estimation of wave elevation and wave disturbance which was caused by the orbital motion of the waves in irregular waves. First, we investigated the wave disturbance by a fully submerged hydrofoil craft, in a state-space model of wave disturbance, and in hydrofoil craft motion, etc. We than considered estimations of the wave elevation and wave disturbance using a shaping filter, a Kalman filter, an autoregressive (AR) model, etc. Finally, we confirmed through simulations that the estimation results and estimation error of wave elevation and wave disturbance were valid.     

Optimization of power management among an engine,battery and ultra-capacitor for a series HEV: A dynamic programming application

In a hybrid electric vehicle (HEV) system, it is an important issue on how to distribute the output power from multiple power generating components to operate a vehicle more efficiently. Many studies have been conducted on how to manage multiple power sources of a vehicle based on various optimization theories. In this study, an algorithm to calculate the optimization of a series HEV that has three power generating components, engine, battery and ultra-capacitor, is developed based on dynamic programming. Normally dynamic programming is applied to the optimization of power management and components sizing by estimating potential fuel economy for electrified vehicle such as HEV, Plug-in HEV or Fuelcell HEV. In contrast with most objective systems that have only two power generating components, the system in this study has three power sources. Since the system has three power sources, the number of state and control variables of optimization problem increases. Therefore the number of calculations increases unreasonably. To decrease the number and time of calculations, a new electric model that contains the both characteristics of battery and ultra-capacitor is developed with some assumptions. In comparison with the optimization algorithm which follows the theory of DP with no assumptions, the results from the newly developed algorithm has 1.04 % discrepancy in terms of fuel economy, even though the calculation time decreases to 4400 times less.     

Operating strategy for gasoline/diesel dual-fuel premixed compression ignition in a light-duty diesel engine

Environmental problems have become a major issue for diesel engine development. Although emission aftertreatment systems such as DPFs (diesel particulate filters), LNTs (lean NOx traps) and SCR (selective catalytic reduction) have been used in diesel vehicles, the manufacturing cost increase caused by this equipment can be hard to be control. Thus, it is better for engine emissions to be reduced by improving the combustion system. A dual-fuel combustion concept is a recommended method to improve a combustion system and effectively reduce emissions. Low reactivity fuel including gasoline and natural gas, which was supplied to the intake port by the FPI (port fuel injector), improved the premixed air-fuel mixture conditions before ignition. Additionally, a small amount of high reactivity fuel, in this case diesel, was injected into the cylinder directly as an ignition source. This dual-fuel combustion promises lower levels of NOx (nitrogen oxide) and PM (particulate matter) emissions due to the elimination of local rich regions in the cylinder. However, it is challenging to control the dual-fuel combustion because the combustion stability and efficiency deteriorate due to the lack of ignition source and reactivity. Thus, it is important to establish an appropriate dual-fuel operating strategy to achieve stable, high efficiency and low emission operation. As a result of this research, a detailed operating method of dual-fuel PCI (premixed compression ignition) was introduced in detail at a low speed and low load condition by using a single cylinder diesel engine. Engine operating parameters including the gasoline ratio, a diesel injection strategy consisting of multiple injectors and timing, the EGR (exhaust gas recirculation) rate and the intake pressure were controlled to satisfy the low ISNOx (indicated specific NOx) and PM emissions levels (0.21 g/kWh and 0.1 FSN, 0.040 g/kWh, respectively) as per the EURO-6 regulation without any after-treatment systems. The results emphasized that a well-constructed dual-fuel PCI operating strategy showed low NOx and PM emissions and high GIE (gross indicated fuel conversion efficiency) with excellent combustion stability.     

Development of a valve and optimization of a tube for self-inflating tire

Worldwide, the tire market requires safe and eco-friendly tires. In this study, a self-inflating tire (SIT) was studied and manufactured. Self-inflating tire refers to a technique for maintaining appropriate tire pressure. An internal regulator senses when tire inflation pressure has dropped below the set air pressure. The tire boosts air through the valve when rolling and compressed air enters into the tire. This procedure keeps the tire air pressure at an appropriate level and increases tire safety. In this study, a regulator was used as a negative-pressure system. A check valve was selected the minute flow check valve depending on the shape of the configured system. In addition, the material of the tube was developed with excellent physical properties and resistances (elastic rebound, working temperature, etc.) owing to its complete compression and restoration. A tube performance tester was developed and a computer aided engineering (CAE) model was modeled for comparison with the test results. Using the tester and model, it was possible to optimize the shape of the tube and regulator. Finally, the reliability of the study was verified through the prototype test. The developed equipment and systems can be used for the manufacture of high-performance and safe tires.     

An ERP approach for container terminal operating systems

The major characteristics of ERP (Enterprise Resource Planning) are an enterprise-wide system that covers all the business functions and information resources, integrated database, built-in best industry practice, packaged software and open architecture. ERP enables reduction of system development time, flexibility, standardization of workflow and effective business planning capability. ERP is mainly for the manufacturing industry. However, the principles of ERP can also be applied to container terminal operating systems. This paper presents an ERP system approach for a container terminal. It has clustered the workflow of a container terminal and analysed the business process to generate the best workflows. The integrated database is designed to eliminate redundancy and keep integration. The core of ERP for container terminal is the planning facility such as berth planning and yard planning. The planning capability is very tightly coupled with data flow from client entities such as shipping companies. The ERP can handle the existing problems of container terminal operation that are mainly caused by lack of integration of a whole information resource in a container terminal, ad-hoc and poor planning capability, disconnected and incorrect data from client companies. The ERP approach can not only resolve the problems of container terminals but also promote adoption of information systems for container terminals in the world that have not yet implemented terminal operating systems.     

Incident reporting in Finnish shipping companies

The purpose of the International Safety Management Code (the ISM Code) is to promote safety culture in the maritime industry. Learning the lessons from incidents should help to improve safety performance since incidents and accidents can share the same root causes. The aim of this paper is to take a closer look at incident reporting in the Finnish shipping industry, to study the reasons for poor incident reporting and to suggest improvements to increase reporting. The paper consists of a literature study, which focuses on previous studies concerning incident reporting, and an interview study, which focuses on Finnish shipping companies and their personnel. The interview study confirmed that incident reporting does not function properly within the Finnish maritime industry. The maritime personnel have an occupational culture which is incompatible with the rule-based safety management approach provided by the ISM Code. The willingness to report incidents could be increased if all seafarers were involved in the reporting process and the preparation of corrective actions. In addition, the reporting procedures should be streamlined and developed to a more user-friendly direction.     

Zonal centrality measures and the neighborhood effect

The goal of this study is to develop a robust methodology for computing zone centrality measures in an urban area. Centrality refers to the relative importance of a zone in terms of network efficiency and utility for both transportation and urban study. Centrality indices that were developed to describe human relationships in the field of structural sociology were adopted. It is important to accommodate the neighborhood effect in dealing with centrality. The neighborhood effect describes the phenomenon whereby the attractiveness of a specific zone is affected by its neighbor zones. Kernel functions were employed to accommodate the neighborhood effect. The optimal bandwidth parameters were derived indirectly within the framework of trip attraction estimation under the assumption that the trip attraction of a zone is influenced by the integrated centrality, which includes the neighborhood effect. The well-known estimation tool of maximum likelihood estimation (MLE) was adopted to find the optimal bandwidth. As a byproduct of accommodating the neighborhood effect in centralities, a considerable advantage of the present study is an enhancement of the performance of trip attraction model. Another meaningful contribution of this study is a solution to the question of an acceptable delineation of the two city centers in Seoul. The boundaries of the two city centers were derived based on both the kernel function and its bandwidth.