Location of bus garages

The location of bus garages is a complex issue that has received recent attention in the literature. Given a bus system, the number of bus garages and their locations depend on garage cost, deadheading cost and environmental impacts. An approximate analytical model is used to determine the number of bus garages that minimizes the above costs. The concept of a slowly varying density of bus-route origins (hence deadheads) per unit area is used to model deadheading costs. The increased deadheading caused by breakdowns and accidents is also considered. The garage cost is modeled as a function of the number of buses stored. A closed-form solution is obtained for the optimal density of garages, when the garage cost function is linear. The actual locations of garages and the allocations of buses to the garages are found using a discrete space location-allocation model formulated so as to consider the environmental impact associated with buses deadheading through populated neighborhoods.     

Influence of vehicular traffic on urban air quality – A case study of Hyderabad,India

In the present study, impact of vehicular traffic emissions on black carbon aerosol mass concentration, trace gases and ground reaching solar radiation were analyzed during nationwide truck strike of 5–12 January, 2009 over urban environment of Hyderabad, India. A significant reduction of about 57%, 60%, 40% and 50% was observed in black carbon, particulate matter, carbon monoxide and ozone respectively during nationwide truck strike period. Results of the study are important for source apportionment of pollutants as the strike created natural laboratory for studying the impact of diesel operated trucks on urban air quality.     

A new hybrid terrain coverage method for underwater robotic exploration

It is well known that it is difficult to explore underwater terrains using an autonomous underwater vehicle due to the varieties and complexities of underwater terrain elements. Since conventional underwater terrain coverage techniques are usually based on the assumption that the underwater surface is planar, they generate an unnecessary exploration path especially on steep sloped surfaces of ocean basins. This paper proposes a new type of coverage technique, the hybrid terrain coverage framework (HTCF), which considers various surface conditions in three-dimensional environments and generates an efficient exploration path for all environments. The HTCF incorporates a planar terrain coverage algorithm, a spiral path terrain coverage algorithm, and a hybrid decision module to recognize and select the most suitable technique depending on the sloped surface variations. Simulation results show that the proposed HTCF is more efficient than the conventional terrain coverage algorithm in terms of the energy consumption of the underwater vehicle.     

Development of hot stamped center pillar using form die with channel type indirect blank holder

The hot stamping process has been used in the automotive industry to reduce the weight of the body-in-white and to increase passenger safety via improved crashworthiness. However, defects such as fracture and wrinkle occur when hot stamping is performed using a conventional drawing or forming method. In this study, a channel-type indirect blank holder (CIBH) is proposed to develop a high-strength center pillar in form-type hot stamping, so that the aforementioned drawbacks are overcome. This type of blank holder plays an important role in reducing severe wrinkling at the flange; such wrinkling leads to folding after the completion of form-type hot-stamping. First, we investigated the effect of the channel shape on the indirect blank holding force by using a simplified two-dimensional plane-strain stamping process. Second, we selected the slope angle and corner radius of the channel as the main shape parameters by finite element analysis and artificial neural network (ANN). It is known that fracture at the hot formed wall and wrinkle at the flange are significantly affected by the slope angle of the channel, and the appropriate value for eliminating fracture and wrinkle is determined to be 99°. By performing hot stamping using a form die with the selected channel, we can manufacture a high-strength center pillar without wrinkle and fracture.     

Computer Simulation of Thermal-Mechanical Processing

AlterationIntroductionThereisastrongini6ractionamongtemPetalrefield,strCssfield,andmicrosttuctutulaltOrationinm8terialsduringtheirhotworking[l'2].Especiallyduringthecoolingprocess,inwhichtemPeratorechangnsgreatly,intendionsbecomemorecomplexbecauseoftransformationoccurmnce.Duringthehotdeformation,thingswillaPpearsuchas:a.hotdeformation,relatedtostressfieId,changesessentiallytheshaPeofmaterialsandcausesthevariationofthecontactstatebetWeenthedieandsample,resultinginchangeofthethermalboundnyco…     

Chaotic movement of vortices in superconductors of high-Tc superconducting maglev system at a high speed

Vortex motion in superconductors of higb-Tc superconducting maglev system is studied by a computational simulation.The vortex system is treated in a similar fashion,as a system where defects arc arrang...     

Multiaxial stress creep rupture mechanisms of AZ31 magnesium alloy

The maximum principal stresses, von Mises effective stresses and principal facet stresses at the time of creep rupture were compared in uniaxial, biaxial, and triaxial stress states for AZ31 magnesium alloy. The creep rupture of this alloy was experimentally controlled by cavitation, which was the result of a low damage tolerance, λ. Creep deformation could be correlated with the von Mises effective stress parameter. The failure-mechanism control parameter governing the stress state coincided with the experimental results of the rupture of the materials under multiaxial stress states. Finally, the theoretical prediction based on constrained cavity growth and continuous nucleation agreed with the experimental rupture data to within a factor of three.     

Automation of paratransit reservation,routing, and scheduling

Santa Clara County, California experienced a sharp growth in demand‐responsive paratransit ridership for individuals with disabilities, as a result of the passage of the 1990 Americans With Disabilities Act (ADA). This paper describes an automated paratransit system for the ADA‐type paratransit operation implemented in Santa Clara County. It automated paratransit reservation, scheduling, and routing functions. The key components of this system were a digital geographic database (DGD) and an automated trip scheduling system (ATSS). Empirical evidence after one year of operation indicates numerous benefits of this automation. There were significant reductions in the paratransit operating costs and an increase in the percent shared rides. The savings in operating costs far exceeded the annualized capital cost of automation. A user survey indicates that these improvements were achieved without degradation to service quality such as vehicle on‐time performance, invehicle travel times, vehicle response to open return, and ride comfort.     

Measuring community reaction to urban transportation impacts using Von Neumann‐Morgenstern utility theory

This paper attempts to measure the impacts of urban transportation system improvements or changes on the community. The community's perceptions of the impacts are represented by its utilities (or disutilities) over various ranges of values of the multiple attributes representing these impacts. The utility technique used in the evaluation is based upon von Neumann‐Morgenstern (vN‐M, 1947) Utility Theory, and is applied using Raiffa's (1970) Fractile Method.

The paper specifically applies the technique to model the perceptions of five subgroups within a community to the impact of a new light rail transit system that is being incorporated in the transportation system of the City of Calgary.

Results of the modeling indicate explicitly how the community changes its perception over ranges of values of the attributes evaluated. Biases of various subgroups within the community over these attributes are also shown. Statistical tests indicate that aggregated utility perceptions can represent the utility perceptions of the individual subgroups quite reasonably.