Transient characteristics of emissions during engine start/stop operation employing a conventional gasoline engine for HEV application

In this paper, we investigate the transient characteristics of combustion and emissions during engine start/stop operations in hybrid electric vehicle (HEV) applications. Hydrocarbon (HC) emissions during the initial 2^nd∼9^th cycles are found to be significantly greater when the engine is quickly started under the original engine calibration mode. Lower intake manifold absolute pressure (MAP) was also found to cause larger residual gas dilution and poor combustion, resulting in a higher HC concentration when the cranking speed was increased. The post-catalyst HC concentration was found in the way of initially decrease and then to increase again as the cranking speed was increased. A lowest concentration value was achieved at a cranking speed of 1000 r/min. Engine shut-down by fuel cut-off was shown to produce lower emissions than shut-down by ignition cut-off as one can avoid misfire of the last fuel injection cycle. The fuel deposited during the stop process seems to impact engine restart enrichment mostly during the initial 0.7 s for this engine, whose performance is dominated by the MAP transition characteristic and the time coefficient for fuel vaporization in this time period     

Optimized design for a MacPherson strut suspension with side load springs

Undesired lateral force inevitably exists in a MacPherson suspension system, which is liable to damper rod’s side wear and promotes the damper’s inner friction decreasing the ride performance from the suspension system. Substituting a new side load spring with curved centerline for the conventional coil spring has been proven able to solve these problems and Multi-body Dynamics combining with Finite Elements Analysis may be an efficient method in optimizing its design. Therefore, taking a passenger car as example, a detailed multi-body dynamics model for the suspension system is built to simulate forces exerted on the damper and the minimization of its lateral component is selected as the design target for the spring. When the structure optimization of the side load spring is performed using FEA software ANSYS, its vertical and lateral elastic characteristics, supported by test data, are analyzed. After importing FEA results back to the suspension system, the dynamics simulation can be performed to validate the optimization result.     

Desired yaw rate and steering control method during cornering for a six-wheeled vehicle

This paper proposes a steering control method based on optimal control theory to improve the maneuverability of a six-wheeled vehicle during cornering. The six-wheeled vehicle is believed to have better performance than a four-wheeled vehicle in terms of its capability for crossing obstacles, off-road maneuvering and fail-safe handling when one or two of the tires are punctured. Although many methods to improve the four-wheeled vehicle’s lateral stability have been studied and developed, there have only been a few studies on the six-wheeled vehicle’s lateral stability. Some studies of the six-wheeled vehicle have been reported recently, but they are related to the desired yaw rate of a four-wheeled vehicle to control the six-wheeled vehicle’s maneuvering during corning. In this paper, the sideslip angle and yaw rate are controlled to improve the maneuverability during cornering by independent control of the steering angles of the six wheels. The desired yaw rate that is suitable for a six-wheeled vehicle is proposed as a control target. In addition, a scaled-down vehicle with six drive motors and six steering motors that can be controlled independently is designed. The performance of the proposed control methods is verified using a full model vehicle simulation and scaled-down vehicle experiment.     

Effect of fuel stratification on initial flame development: Part 2-low swirl condition

This paper is the second invstigation on the effect of fuel stratification on flame propagation. In the previous work, the characteristics under the no port-generated swirl condition, i.e., the conventional case was studied. In this work, the flame development under the low swirl condition was considered. For this purpose, the initial flame development and propagation were visualized under different axially stratified states in a modified optical single cylinder SI engine. The images were captured by an intensified CCD camera through the quartz window mounted in the piston. Stratification was controlled by the combination of the port swirl ratio and injection timing. These were averaged and processed to characterize the flame propagation. The flame stability was estimated by the weighted average of flame area and luminosity. The stability was also evaluated through the standard deviation of flame area and propagation distance and through the mean absolute deviation of the propagating direction. The results show that the flame-flow interaction determines the direction of flame propagation and that the governing roles of the two factors vary according to the stratified state and the location in the cylinder. In addition, the flame development and the initial flame stability are strongly dependent on the stratified conditions, and the initial flame stability is closely related to the engine stability and lean misfire limit. Lastly, there is no essential difference in gasoline and CNG flame propagation characteristics.     

Adaptive neuron control using an integrated error approach with application to active suspensions

This paper proposes a new neuron control strategy for an active vehicle suspension system, with the emphasis on the study of multivariable and uncertain suspension characteristics. The novelty of this strategy is in the use of integrated error, which consists of multiple output errors in the regulated plant. By combining the integrated error approach with the traditional neuron control (TNC), integrated error neuron control (IENC) is presented. It provides a direct control to the multiple outputs of the control plant simultaneously. Taking a quarter-car model as an example, the proposed control strategy is applied and comparative simulations are carried out with various vehicle parameters and road input conditions. Simulation results prove the effectiveness and robustness of the proposed IENC method. In addition, the newly proposed neuron scheme provides a simple yet efficient new possibility for the control of a class of uncertain multivariable systems similar to an active vehicle suspension.     

Automotive structure vibration with component mode synthesis on a multi-level

The recursive component mode synthesis method (RCMS) has been implemented for the finite element analysis model of an automobile structure as an efficient free vibration analysis tool. The RCMS method is intended to obtain a better performance relative to the block Lanczos method, which is a traditional method in the industry of obtaining eigenvalues, while obtaining the acceptable accuracy. A numerical example of the automobile finite element model demonstrates the outstanding performance of RCMS compared to the block Lanczos method.     

The impact of high-speed technology on railway demand

This paper estimates a passenger railway demand function to analyse effects arising from the introduction and use of high-speed technologies. The paper reports estimates of demand elasticities with respect to price, income, quality of service and a range of exogenous characteristics. The results show that travel time savings from conventional high-speed technology have a larger impact on passenger demand than tilting train technology. The introduction of conventional high-speed technology is associated with an 8% increase in passenger railway demand. Increasing the use of either type of high-speed technology appears to induce small positive effects on demand beyond those obtained from usual traffic density increases on non-high-speed existing technology.

Public perceptions of the use of dynamic message signs

Intelligent transportation systems have been promoted as a means to improve both the efficiency and safety of the road network. The effectiveness of advanced technologies in improving road safety has been an area of research which has thus far yielded mixed results. In order to ensure that advanced technologies deliver on their intended outcomes, more research has to be devoted to understanding road users' perceptions and reactions to these systems. This study examines drivers' perceptions of the use of dynamic message signs and their self‐reported reactions to the messages displayed. In general, drivers support the use of highway electronic boards for traffic incident reports and weather information which have an impact on traffic delays and level of service. They also think that it is a good idea to display road safety messages and to remind drivers to drive safely and be courteous on the roads. Moreover, most drivers reported that they do read and think about the messages displayed and react positively to some of the road safety messages.     

Deconstructing development density: Quality, quantity and price effects on household non-work travel

Smart growth and transit-oriented development proponents advocate increasing the density of new land development and infill redevelopment. This is partly in order to reduce auto use, by reducing distances between trip origins and destinations, creating a more enjoyable walking environment, slowing down road travel, and increasing the market for transit. But research investigating how development density influences household travel has typically been inadequate to account for this complex set of hypotheses: it has used theoretically unjustified measures, has not accounted for spatial scale very well, and has not investigated potentially important combinations of measures. Using data from a survey of metropolitan households in California, measures of development density corresponding to the main hypotheses about how density affects travel—activity density affecting distance traveled, network load density affecting the speed of auto travel, and built form density affecting the quality of walking—are tested as independent variables in models of auto trip speed and individual non-work travel. Residential network load density is highly negatively correlated with the speed of driving, and is also highly correlated with non-work travel, both singly and in combination with other measures. Activity density and built form density are not as significantly related, on their own. These results suggest that denser development will not influence travel very much unless road level-of-service standards and parking requirements are reduced or eliminated.     

基于C8051F020单片机的T型管自动焊接机控制系统

为了提高T型管的焊接质量和效率,设计了一台用C8051F020单片机自动控制的焊接设备。同时采用C8051F020的12位A／D转换功能实现对焊接系统中加工参数的实时检测。该自动焊接系统在钢制散热器管道焊接生产应用中取得了良好的效果,是一种低成本、自动化的T型焊缝专用焊接设备。