Optimization of pedestrian phase patterns at signalized intersections: a multi‐objective approach

This paper presents a multi‐objective optimization model and its solution algorithm for optimization of pedestrian phase patterns, including the exclusive pedestrian phase (EPP) and the conventional two‐way crossing (TWC) at an intersection. The proposed model will determine the optimal pedestrian phase pattern and the corresponding signal timings at an intersection to best accommodate both vehicular traffic and pedestrian movements. The proposed model is unique with respect to the following three critical features: (1) proposing an unbiased performance index for comparison of EPP and TWC by explicitly modeling the pedestrian delay under the control of TWC and EPP; (2) developing a multi‐objective model to maximize the utilization of the available green time by vehicular traffic and pedestrian under both EPP or TWC; and (3) designing a genetic algorithm based heuristic algorithm to solve the model. Case study and sensitivity analysis results have shown the promising property of the proposed model to assist traffic practitioners, researchers, and authorities in properly selecting pedestrian phase patterns at signalized intersections. Copyright © 2013 John Wiley & Sons, Ltd.     

Technology development for environmentally sound ships of the 21st century: an international perspective

Around the world, ships operating in the 21st century tury will be expected tomeet increasingly stringent environmental regulations. Many governments have comprehensive shipboard pollution abatement programs under way that will enable ships of the 21st century to be environmentally sound. The goal is for ships to operate worldwide with minimal potential for regulatory constraints, without inappropriate dependence on shore facilities, and without unreasonable costs imposed by environmental regulations. The following is the basic strategy: Design and operate ships to minimize emissions and waste generation while optimizing waste management, and develop shipboard systems that will destroy or appropriately treat the wastes generated on board. If wastes are unavoidable and cannot be destroyed or retained on board for recycling ashore, they must be sufficiently treated so that overboard discharges are considered environmentally insignificant. Although the ultimate solution for onboard destruction has not been achieved for any shipboard waste stream, considerable progress has been made toward developing onboard capabilities for treating or rrocessing solid wastes, oily wastes, hazardous materials, and medical wastes. Satisfactory interim or long-term solutions are being sought for blackwater and graywater treatment. International cooperative efforts directed toward achieving environmentally sound ships are under way among governments to share information and technologies, and to save time and money. Presented at the International Conference on Technologies for Marine Environment Preservation (MARIENV '95), Tokyo, Japan, September 24–29, 1995.     

Advanced transportation economic development

The end of the cold war and confrontational politics of the eastern and western worlds have raised the possibility that resources formerly targeted toward military systems and options may be turned towards global lifestyle improvements [OTA, 1993]. Transportation has been one of the fields proposed as a likely candidate for both improvements and jobs. It is not possible to address economic development in the context of all transportation in one essay. For this reason I am only addressing the issues of economic development associated with mass transportation characteristic of urban and interurban environments. Realigning former defense resources to mass transit requires careful consideration of market conditions. According to economic survey data published by the Economic Roundtable in Los Angeles, there are currently less than 40,000 manufacturing jobs in the U.S. rail transportation industry [Drayse, 1993]. The same survey pointed out a severe mismatch between the skill base required by the rail industry and available defense technology resources. There exists no large base of unsatisfied demand in the rail market, therefore development of a large number of jobs is not likely if the approach is simply to introduce additional competing resources into a traditional market [Monitor, 1993].     

A real-time traffic signal control system: architecture, algorithms, and analysis

The paper discusses a real-time traffic-adaptive signal control system referred to as RHODES. The system takes as input detector data for real-time measurement of traffic flow, and “optimally” controls the flow through the network. The system utilizes a control architecture that (1) decomposes the traffic control problem into several subproblems that are interconnected in an hierarchical fashion, (2) predicts traffic flows at appropriate resolution levels (individual vehicles and platoons) to enable pro-active control, (3) allows various optimization modules for solving the hierarchical subproblems, and (4) utilizes a data structure and computer/communication approaches that allow for fast solution of the subproblems, so that each decision can be downloaded in the field appropriately within the given rolling time horizon of the corresponding subproblem. The RHODES architecture, algorithms, and its analysis are presented. Laboratory test results, based on implementation of RHODES on simulation models of actual scenarios, illustrate the effectiveness of the system.     

The combined effect of rain and wind on air–water gas exchange: A feasibility study

A series of experiments were conducted at University of Delaware's Air–Sea Interaction Laboratory to examine the combined effects of rain and wind on air–water gas exchange. During this study, ASIL WRX I, a combination of 3 rain rates and 4 wind speeds were used, for a total of 12 different environmental conditions. The SF₆ evasion method was used to determine the bulk gas transfer velocities, and airside profiles of wind and CO₂ were used to estimate flux–profiles of momentum and carbon dioxide. In addition to measurements of fluxes with and without rain in a wind–wave boundary layer, measurements of wave properties were also obtained. Rain is shown to alter the wind profile in the flume, and dampen surface waves. Also, SF₆ evasion indicates that with the present experimental setup, for most of the experimental conditions, rain and wind combine linearly to influence air–water gas exchange. Flux–profile relationships for marine atmospheric boundary layers, which were performed to scale up to field measurements, were explored by a comparison between SF₆-derived bulk fluxes and airside CO₂ profile measurements.     

EFFECT OF GRINDING TISSUE ON ISOLATE RECOVERY FROM RABBIT CORNEAS WITH FUNGAL KERATITIS

ＥＦＦＥＣＴＯＦＧＲＩＮＤＩＮＧＴＩＳＳＵＥＯＮＩＳＯＬＡＴＥＲＥＣＯＶＥＲＹＦＲＯＭＲＡＢＢＩＴＣＯＲＮＥＡＳＷＩＴＨＦＵＮＧＡＬＫＥＲＡＴＩＴＩＳＲｉｃｈａｒｄＲｏｂｉｎｓｏｎ，ＹａｎｇＲｏｎｇ；Ｗ．ＳｔｅｖｅｎＨｅａｄ，ＤｅｎｔｓＯ＇Ｄａｙ（Ｄ...     

A comparison of user-optimum versus system-optimum traffic assignment in transportation network design

In this report, we compare the computational efficiency and results of solving two alternative models for the problem of determining improvements to an urban road network. Using a 1462 link, 584 node test network of the north Dallas area, we compare a model which assumes user-optimum behavior of travelers with a model which assumes system-optimum flows. Both of these models allow improvements to the road network to take on any nonnegative value, rather than requiring discrete improvement values. Investment costs are modeled by functions with decreasing marginal costs. Unfortunately, the user-optimum model, which is much more realistic than the system-optimum one, normally cannot be solved optimally. However, the simpler system-optimum model can be optimally solved, provided that investment costs are approximated by linear functions. Thus, for this network design problem we compare an accurate representation which can be solved only approximately with an approximate representation which can be solved optimally. Our computational testing showed that the system-optimum model produces solutions as good as those from the user-optimum model, and thus seems justified when favored by other considerations, such as ease of coding, availability of “canned” programs, etc.