Nanoparticle emission characteristics and reduction strategies by boost pressure control and injection strategies in a passenger diesel engine

This research attempted to analyze nanoparticles and other harmful exhaust emissions in accordance with injection strategies and air-fuel ratio (AFR) changes for small diesel engines. The emission characteristics were analyzed in the medium-speed condition, which is the main driving range of a diesel engine. In the case of particulate matter (PM), the number of particles was measured, analyzed, and compared to identify the correlation and emission characteristics of nanoparticles by using a dilution device and condensation particle counter (CPC), which are international standards for particle measurement recommended by the Particulate Measurement Programme (PMP). The engine torque tended to be reduced as pilot injections were added, and the torque was increased by the increased boost pressure, but reduced by the exhaust pressure increase in a part of the low-load range. The number of nanoparticles was not influenced greatly by the change in AFR, but the reduction effect on the PM weight was great depending on the boost pressure increase. In addition, the number of nanoparticles tended to increase as the fuel injection timing became closer to TDC in all conditions, and its difference became larger with an increase in AFR. In addition, in the case of the pilot injection, nanoparticle emission showed similar characteristics depending on the main injection timing, but it was increased by advanced injection timing when performing the main injection only, and the number of the nanoparticles increased as pilot injections were added. Last, the optimal conditions for EMS calibration were analyzed by selecting the conditions of torque reduction and NOx increase within 5 % from all of the engine operating conditions; optimized conditions are presented.     

Vibration reduction of H/Shaft using an electromagnetic damper with mode change

The objective of this study is to develop a damper that can reduce the amplitude of vibration in various frequency ranges. Previous H/Shaft vibration reduction methods work in a passive way. A dynamic damper reduces the amplitude of vibration at its first mode, but vibration still appears at the second mode. A mass damper or hollow shaft can shift the natural frequency to a lower or higher region. The fixed operating frequency prevents vibration from being reduced outside the operating frequency range. The proposed damper uses electromagnets as either masses or actuators to change the damper mode between dynamic damper mode and mass damper mode. The electromagnetic damper (EMD) can change its mode to respond to the vibration excitation at both low and high frequencies. The vibration reduction performance was evaluated by FRF tests in laboratory and vehicle conditions. The results were compared with those of a dynamic damper and indicate that the amplitude of vibration is reduced by 95.6 % when the EMD is implemented on an H/Shaft, whereas only 61.9 % vibration reduction is achieved by the dynamic damper.     

Modeling research on manufacturing execution system based on large-scale system cybernetics

A cybernetics model of manufacturing execution system(MES CM) was proposed and studied from the viewpoint of cybernetics.Combining with the features of manufacturing system, the MES CM was modeled by"generalized modeling"method that is discussed in large-scale system theory.The mathematical model of MES CM was constructed by the generalized operator model, and the main characteristics of MES CM were analyzed.     

A data model applied to the knowledge-based ICAS

Image-guided computer aided surgery system (ICAS) contributes to safeness and success of surgery operations by means of displaying anatomical structures and showing correlative information to surgeons in the process of operation. Based on analysis of requirements for ICAS, a new concept of clinical knowledge-based ICAS was proposed. Designing a reasonable data structure model is essential for realizing this new concept. The traditional data structure is limited in expressing and reusing the clinical knowledge such as locating an anatomical object, topological relations of anatomical objects and correlative clinical attributes. A data structure model called mixed adjacency lists by octree-path-chain (MALOC) was outlined, which can combine patient's images with clinical knowledge, as well as efficiently locate the instrument and search the objects' information. The efficiency of data structures was analyzed and experimental results were given in comparison to other traditional data structures. The result of the nasal surgery experiment proves that MALOC is a proper model for clinical knowledge-based ICAS that has advantages in not only locating the operative instrument precisely but also proving surgeons with real-time operation-correlative information. It is shown that the clinical knowledge-based ICAS with MALOC model has advantages in terms of safety and success of surgical operations, and help in accurately locating the operative instrument and providing operation-correlative knowledge and information to surgeons in the process of operations.     

Analysis and improvement of authenticatable ring signcryption scheme

We show that the Zhang-Yang-Zhu-Zhang identity-based authenticatable ring signcryption scheme is not secure against chosen plaintext attacks.Furthermore, we propose an improved scheme that remedies the weakness of the Zhang-Yang-Zhu-Zhang scheme.The improved scheme has shorter ciphertext size than the Zhang-Yang-Zhu-Zhang scheme.We then prove that the improved scheme satisfies confidentiality, unforgeability, anonymity and authenticatability.     

Power network parameter estimation method based on data mining technology

The parameter values which actually change with the circumstances, weather and load level etc.produce great effect to the result of state estimation. A new parameter estimation method based on data mining technology was proposed. The clustering method was used to classify the historical data in supervisory control and data acquisition (SCADA) database as several types. The data processing technology was impliedto treat the isolated point, missing data and yawp data in samples for classified groups. The measurement data which belong to each classification were introduced to the linear regression equation in order to gain the regression coefficient and actual parameters by the least square method. A practical system demonstrates the high correctness, reliability and strong practicability of the proposed method.     

Fault diagnosis for singular stochastic systems

This paper studies the fault diagnosis of singular stochastic systems. The probability distribution of output is measured by probability density functions (PDFs), which are modeled by a square root B-spline expansion. An adaptive nonlinear observer is proposed to estimate the size of the fault occurring in systems. Furthermore, the linear matrix inequality (LMI) approach is applied to establish sufficient conditions for the existence of the observer. Finally, the simulation results are given to indicate the method for diagnosing the fault.     

Sub‐optimal decision‐making and the transportation problem

A modification to the transportation problem is outlined that aims to improve the quality of predictions of trip matrices, and at the same time, allow some behavioural and economic insights. A framework is suggested within which this modification may be made and a suitable statistic and iterative process are described. A simple example demonstrates the validity of the modification and suggests some areas of difficulty with the approach.     

Vocational and academic approaches to maritime education and training (MET): Trends,challenges and opportunities

Traditional seafarer training has always focused on the acquisition and use of practical skills. The prevailing view is that, while this approach addresses a degree of cognitive skills, it focuses on and gives much more emphasis to the acquisition of hands-on practical skills for the performance of specific tasks. On the other hand, academic education has been seen to be much more focused on the development of in-depth analytical and critical thinking skills; cognitive skills that are less reliant on hands-on task-oriented training, but stress critical reading and discussion. The global trend in maritime education and training is increasingly to link an essentially vocational education that provides specific and restricted competence outcomes with more general or deeper academic components leading to an academic qualification. This trend has led to some dilemmas for curriculum development, for training legislation in a global industry, and for achieving desired learning outcomes in a professional setting (in the shipping industry). This paper discusses some of the challenges arising from this trend and the opportunities the trend offers.