Robust design optimization of suspension system by using target cascading method

This study presents the robust design optimization process of suspension system for improving vehicle dynamic performance (ride comfort, handling stability). The proposed design method is so called target cascading method where the design target of the system is cascaded from a vehicle level to a suspension system level. To formalize the proposed method in the view of design process, the design problem structure of suspension system is defined as a (hierarchical) multilevel design optimization, and the design problem for each level is solved using the robust design optimization technique based on a meta-model. Then, In order to verify the proposed design concept, it designed suspension system. For the vehicle level, 44 random variables with 3% of coefficient of variance (COV) were selected and the proposed design process solved the problem by using only 88 exact analyses that included 49 analyses for the initial meta-model and 39 analyses for SAO. For the suspension level, 54 random variables with 10% of COV were selected and the optimal designs solved the problem by using only 168 exact analyses for the front suspension system. Furthermore, 73 random variables with 10% of COV were selected and optimal designs solved the problem by using only 252 exact analyses for the rear suspension system. In order to compare the vehicle dynamic performance between the optimal design model and the initial design model, the ride comfort and the handling stability was analyzed and found to be improved by 16% and by 37%, respectively. This result proves that the suggested design method of suspension system is effective and systematic.     

Integration of a single cylinder engine model and a boost system model for efficient numerical mapping of engine performance and fuel consumption

A numerical engine mapping methodology is proposed for the engine performance and fuel consumption map generation. An integrated model is developed by coupling a single cylinder GT-Power® engine model with a MATLAB/ Simulink® based boost system model to simulate a turbocharged diesel engine over the entire engine operating speed and load ranges within reasonable computational constraints. A single cylinder engine model with the built-in multi-zone combustion modeling option in GT-Power® is configured as a predictive engine model. The cycle averaged simulation result from the engine model is used as the boundary conditions of the boost system including intake and exhaust manifolds and a turbocharger. The boost system model developed in MATLAB/Simulink® platform calculates the intake and exhaust conditions which are fed back to the engine model. The integrated system model predicts the performance and fuel consumption of a turbocharged diesel engine with better predictive capability than mean value engine models. Its computational time is fast enough to simulate the engine over the entire engine operation range compared to multi-cylinder engine models.     

Simulations of roughness growth on rails - results from a 2D non-Hertzian, non-steady contact model

A new model for simulating rail roughness growth on tangent track is presented in this paper. The model consists of three relatively independent components: (1) a time-domain vehicle/track interaction model; (2) a 2D non-Hertzian and non-steady wheel/rail contact model; and (3) a wear model. Wheel/rail contact forces for a given initial roughness obtained from the vehicle/track interaction model are used by the contact model to calculate the contact patch size, normal pressure and tangential stresses with material removal assumed to be linearly proportional to the friction work in the contact patch. The roughness profile is updated and fed back into vehicle/track interaction model. The 2D contact model is initially compared with a 3D model for various wavelength of initial sinusoidal roughness. Long term roughness growth is then simulated with the 2D contact model. Simulation shows that all initial sinusoidal roughness of wavelengths between 20-100 mm are levelled out. The wavelength-fixing mechanism, that has previously been used to explain the cause of corrugation, is not found in the present investigations.     

Review of empirical and semi-empirical Y factor solutions for cracked welded tubular joints

The practical use of fracture mechanics has been established for use on large turbine and electric generator rotor components used in the atomic power generation and the aircraft industry. Application areas in the offshore industry have also been identified. Fracture mechanics is currently used at the design stage of offshore facilities. It provides the basis for fatigue life prediction, steel selection and tolerance setting on allowable weld imperfections. Fracture mechanics is also used during the operational stage of a structure to make important decisions on inspection scheduling and repair strategies and as a tool for establishing limits on operational conditions. Linear elastic fracture mechanics relies on the use of the stress intensity factor concept. The stress intensity factor is a very important fracture mechanics parameter. Therefore, the accuracy of any fracture mechanics model for the prediction of fatigue crack growth in offshore structures for example will depend very much on the accuracy of the stress intensity factor solution used. Several empirical and semi-empirical solutions have been developed over the years with varying degrees of accuracy. This paper presents a review of some of these methods and attempts to assess their accuracy in predicting Y factors for welded tubular joints by comparing predicted results with experimental data obtained from fatigue tests conducted on large scale welded tubular joints. The experimental results were conducted under simulated service conditions, using a jack-up offshore standard load history (JOSH). A comparison between the experimental and predicted results shows that there may be other factors, which influence fatigue crack growth under variable amplitude conditions. Some of these factors have been identified and discussed in this paper.     

Successful Transplantation of a Fragmenting Coral,Montipora digitata,for Reef Rehabilitation

The scleractinian coral Montipora digitata (Acroporidae) is a common reef flat species that thrives under high levels of light and water turbulence, and propagates successfully by natural fragmentation. It was used for transplantation experiments in an attempt to restore a degraded lagoon environment in the northwestern Philippines. Branches about 5 cm high from a natural population in the lagoon were transplanted to dead coral outcrops or knolls in two locations (Binlab and Malilnep-Ac) with different environmental characteristics. Growth and survival were significantly better at Malilnep Ac, which resembled the natural habitat of the species more closely. Environmental conditions at this site also favored the establishment of a greater diversity of species around the coral transplants. There was no difference in performance between transplants on vertical and horizontal surfaces, and the transplants showed limited differences due to density within the experimental range. Significant survival of detached, transplanted colonies or fragments thereof around the bases of the experimental bommies at the more successful site was an additional positive outcome. Water motion showed significant effects on survival and growth, possibly enhancing the suitability of the more successful site for transplantation. These results demonstrate the potential of coral transplantation to initiate the establishment of natural communities in degraded reef areas, a concern for coastal managers in developing countries.     

Livelihoods,daily mobility and poverty in sub-saharan Africa

Based on research funded by the UK Department for International Development, this paper investigates the utility of a livelihoods approach in identifying the mobility and accessibility needs of the poor. Mobility patterns and livelihoods of stratified samples of households in urban-to-rural corridors originating in the national capital cities of Zimbabwe and Uganda are compared, with emphasis on the poor's position relative to higher income groups. It is found that livelihood work was the most frequent purpose of short-distance travel for all income groups and localities, amounting to 38% of trip purposes in Uganda and 46% in Zimbabwe. On average, Zimbabweans were more mobile making more daily trips over longer distances reflective of greater reliance on motorized transport in the country. Nonetheless, walking dominates modal journeys in both countries. Ugandans display heavier dependence on bicycle and motorcycle transport primarily through taxi hire compared with Zimbabweans' private care and public kombi bus transport. Survey evidence suggests that Uganda's poor and middle-incomed urban and rural residents benefit from more widely available multimodal public transport.     

Lane assignment problem using a genetic algorithm in the Automated Highway Systems

This paper deals with the lane assignment problem in the Automated Highway Systems (AHS). The purpose of lane assignment strategies is to increase throughput on multi-lane highways with many entry and exit points, based on the itineraries of vehicles using the highway (point of entry, time of entry and exit point) and the effects of maneuvers. Using partitioned lane assignment strategies, the lane assignment problem is formulated as an optimization problem to find the proper positions of partitions. Then the optimal problem is solved using a Genetic Algorithm (GA). The proposed algorithm has been validated by comparing its solution with that of an all-cases algorithm for a simple case. Moreover, a traffic simulator with a realistic car-following model as well as lane change logic has been developed. The simulation results show the efficiency of the proposed genetic algorithm, compared with random assignment algorithms.     

The Value of a Spillover Fishery for Spiny Lobsters Around a Marine Reserve in Northern New Zealand

The contribution that Leigh Marine Reserve in northern New Zealand makes to the local spiny lobster fishery was examined by comparing the catch characteristics of Jasus edwardsii around the reserve boundary with those from Coastal Leigh, 0.3-2 km from the reserve, and Little Barrier Island, 22-30 km from the reserve. Seasonal trends were apparent in the reserve catch characteristics, consistent with lobster movements into and out of offshore fishing areas adjacent to the boundary. No significant difference was detected in catch per unit effort (kg.trap haul -1 ) among locations. However, the catch around the marine reserve consisted of fewer but larger lobsters than at Little Barrier Island, while the size and number of lobsters caught per trap haul at Coastal Leigh was intermediate between the other two locations. Catch rates around the reserve were more variable than at the other sites, but on average, the amount of money made per trap haul was similar to Little Barrier Island and Coastal Leigh.