基于混沌蚁群算法的最短路径选择研究

如何解决最短路径选择问题一直是城市交通流诱导系统的关键之一.基于群体仿生理论的蚁群算法是解决此问题的一种方法,针对采用蚁群算法进行最短路径选择时易出现的陷入局部最优解问题,引入混沌理论,采用混沌蚁群算法利用混沌初始化进行改善个体质量和利用混沌扰动避免在蚁群算法搜索过程中陷入局部极值,同时降低了蚁群算法的时间复杂度,从而更好的解决了最短路径选择问题.     

LM331在内燃机车检测中的应用

本文给出一种应用于内燃机车水阻测试台的主电压检测电路,该电路使用廉价的单片V/F转换器,通过光电耦合方式,既保证了检测电压的精度,又可有效防止各种干扰串入计算机控制系统。     

某型舰炮武器模拟训练系统设计

以军事需求为依据,提出了基于HLA的某型舰炮武器模拟训练系统的功能性能需求,描述了运行体系和支持条件等仿真环境,设计了软硬件实施方案和系统运行流程.实践证明该方案设计合理,可操作性强,能够达到武器系统仿真要求.     

Implementing green supply chain practices: an empirical investigation in the shipbuilding industry

ABSTRACT

Environmental concerns have become important in the shipbuilding industry. Governmental expectations about environmental and social performance are much higher than in the past. Public authorities penalize companies that do not comply with the rules. Shipbuilding companies face these challenges by introducing new technologies into their business processes. They do not only start initiatives to green their own business processes but also those of their supply chain partners. This form of environmental management is called Green Supply Chain Management (GrSCM) and its importance is increasingly recognized. Although GrSCM is growing, companies are experiencing difficulties engaging suppliers in environmental activities.

This empirical study analyses drivers for supply chain participation of suppliers in the shipbuilding industry. We explain the participations of suppliers in GrSCM practice by investigating influencing factors including governmental involvement in greening the supply chain, customer requirements towards green issues, feeling of social responsibility, competitive advantage by going green, and GrSCM readiness. Hypotheses are tested with partial least squares, using survey data of 93 suppliers of two leading shipbuilding companies. We found GrSCM readiness, competitive advantage, and social responsibility to be significant drivers in supplier participation. No significant support was found for governmental involvement and customer requirements.     

A non-geometrically similar model for predicting the wake field of full-scale ships

The scale effect leads to large discrepancies between the wake fields of model-scale and actual ships, and causes differences in cavitation performance and exciting forces tests in predicting the performance of actual ships. Therefore, when test data from ship models are directly applied to predict the performance of actual ships, test results must be subjected to empirical corrections. This study proposes a method for the reverse design of the hull model. Compared to a geometrically similar hull model, the wake field generated by the modified model is closer to that of an actual ship. A non- geometrically similar model of a Korean Research Institute of Ship and Ocean Engineering (KRISO)’s container ship (KCS) was designed. Numerical simulations were performed using this model, and its results were compared with full-scale calculation results. The deformation method of getting the wake field of full-scale ships by the non-geometrically similar model is applied to the KCS successfully.     

山区弯曲河道鱼类产卵栖息地适宜度的分布特征

研究鱼类产卵栖息地适宜度的分布特征对河道生态保护具有重要意义。以长江上游中盘子弯曲河道为例,基于平面二维水流数值模拟资料,开展山区弯曲河道四大家鱼产卵栖息地适宜度的分布特征研究。结果表明:1)鱼类产卵栖息的最适宜区域将随流量而变,小流量时多居深槽,流量增大后多居边滩。2)微生境适宜性面积S_A随流量Q呈"先增大后减小"的变化特征,S_A峰值出现在多年平均流量附近。3)河道两岸流速适宜度S_V相对较大,中部深泓水深适宜度S_D和栖息地适宜指数S_H相对较大;凹岸及凸岸的S_D、S_H之间均具有一定的相关性,S_H随S_D呈线性递增变化趋势。4)多年平均流量下,弯道沿程各断面的S_D沿河宽分布呈"两端小、中间大"的特征,S_V、S_H沿河宽分布总体重合,数值差异主要体现在两岸附近; S_H0. 8的区域主要集中在河道两岸和凹岸边滩,该区域较适于鱼类产卵栖息。研究成果可为山区河道鱼类资源保护和生态航道工程建设提供科学参考。     

复合材料剪切圆柱壳在轴压下的屈曲与后屈曲

给出了非对称正交铺层剪切圆柱壳广义Donnell型大挠度方程,并运用位移型摄动技术构造出该圆柱壳在轴压作用下的后屈曲渐近级数解.为保证边值问题摄动解的一致性,本文研究了边界效应对中短圆柱壳的影响,亦即运用奇异摄动技术详细分析了该圆柱壳端部边界层方程和奇异摄动解.并讨论了横向剪切变形、Batdorf数、弹性模量比和初始几何缺陷对圆柱壳屈曲与后屈曲性态的影响.比较显示,横向剪切变形对圆柱壳的屈曲与后屈曲有重要影响.     

A study of factors influencing the severity of road crashes involving drunk drivers and non drunk drivers

In this study, an attempt has been made to develop Multinomial Logit (MNL) model by analysing the drunken and non drunken drivers involved in road crashes on Indian highways. Multinomial Logit model has been deployed to assess the influence of various parameters like vehicular, environment and geometric factors on the set of drivers who were found to be drunk at the time of getting involved in the road crash and those who were not under the influence of alcohol at the time of meeting with the road crash. The total economic cost of road crashes in the case of non-drunk driver road crash is Rs. 1046.27 million whereas in the case of drunk driver road crashes it is estimated to be Rs. 204.50 million. Further, it can be observed that economic cost of drunk driver road crashes is varying from 13 to 19 % across different types of road crashes.     

隧道爆破荷载作用下中隔壁动力响应与破坏机理研究

中隔壁结构作为隧道初期支护体系中重要的承载构件,在隧道爆破荷载作用下极易发生损伤开裂和破坏。首先依托双向八车道的港沟高速公路隧道工程,进行爆破荷载作用下中隔壁的动力损伤破坏试验,提出中隔壁支护结构的破坏形态及类型;然后利用ANSYS/LS-DYNA建立隧道爆破与中隔壁支护结构数值模型,采用流固耦合的方法模拟岩体爆破及中隔壁支护结构的动力响应,并考虑单段装药量、爆距等不同因素,研究其对中隔壁破坏模式及形态的影响。研究结果表明：隧道爆破荷载作用下中隔壁破坏形式分为背爆侧混凝土开裂剥落、中心区域混凝土震塌成洞、钢筋网及纵向连接钢筋震坏断裂、钢拱架发生扭曲变形4种类型;中隔壁支护结构在爆破应力波的作用下处于反复拉压状态,并在岩石破碎抛掷冲击的作用下发生破坏,且中隔壁支护结构中心、顶部和底部是结构最易发生损伤的部位;单段装药量和爆距的改变会对中隔壁支护结构的破坏范围和破坏程度产生影响,且结构呈现出不同的破坏形态,与现场试验结果一致;建议隧道爆破施工时爆距控制在40 cm以上,单段药量控制在7.2 kg以下,以减少对中隔壁支护结构的破坏。     

A link-node complementarity model and solution algorithm for dynamic user equilibria with exact flow propagations

In this paper, we propose a link-node complementarity model for the basic deterministic dynamic user equilibrium (DUE) problem with single-user-class and fixed demands. The model complements link-path formulations that have been widely studied for dynamic user equilibria. Under various dynamic network constraints, especially the exact flow propagation constraints, we show that the continuous-time dynamic user equilibrium problem can be formulated as an infinite dimensional mixed complementarity model. The continuous-time model can be further discretized as a finite dimensional non-linear complementarity problem (NCP). The proposed discrete-time model captures the exact flow propagation constraints that were usually approximated in previous studies. By associating link inflow at the beginning of a time interval to travel times at the end of the interval, the resulting discrete-time model is predictive rather than reactive. The solution existence and compactness condition for the proposed model is established under mild assumptions. The model is solved by an iterative algorithm with a relaxed NCP solved at each iteration. Numerical examples are provided to illustrate the proposed model and solution approach. We particularly show why predictive DUE is preferable to reactive DUE from an algorithmic perspective.