浅谈低质量船舶的检查

通过总结工作经验，分析了低质量船舶的特点，阐述了对低质量船舶检查的方法。     

压载水处理技术有效性分析

船舶排放压载水造成的外来物种对海洋环境的侵害,已被全球环境基金组织确认为危害海洋的四大威胁之一。IMO和有关国际组织及机构目前已在致力于压载水处理方法的研究和处理设施的研制,并制定压载水各种处理方式的统一标准。然而国际海事组织制定的压载水导则并不能真正解决压载     

Dynamic model of cable tension and configuration for vessel at anchor

Journal of Marine Science and Technology - A numerical model considering the seabed friction is developed to investigate the dynamic behavior of anchor cable in this paper. In the model, the anchor...     

模糊聚类在舰船目标识别标准模型库的应用

对于给定特征的海上舰船目标,使用了模糊聚类的方法(包括三种解算方法),获得目标的分类并形成标准模型库.同时引入了聚类分析有效性评价的F统计量,实现了模糊聚类的自适应性,避免了聚类数目选择上存在的主观性.聚类结果表明:对于复杂的战场环境,此方法设计可行有效,建立了标准模型库就可以对获得目标特征样本在标准模型库中进行匹配,进而完成目标识别,具有一定的应用前景.     

船舶撞击高桩码头的系统动力仿真研究

利用LS-DYNA显式动力分析软件建立船舶撞击高桩码头的系统动力仿真模型,该模型将船舶—码头—土体视为整体系统,统筹考虑土体的弹塑性、桩与土体的流—固耦合效应和船体与橡胶护舷的面—面接触,可较好地模拟船舶撞击高桩码头过程中的大尺度和非线性变形。初步分析船舶载重量、船舶撞击方式和橡胶护舷等因素对最大船舶撞击力和撞击历时曲线的影响,为确定高桩码头的船舶撞击力提供了可行的动力学分析方法。     

基于STM32的蓄电池检测系统设计

蓄电池检测系统是蓄电池质量指标中非常重要的一环,直接影响蓄电池的性能和寿命。本文介绍一种以STM32微处理器STM32F103RCT6为核心的铅酸蓄电池高精度智能检测系统,可以同时检测电压、温度、液位,并根据神经网络计算得到电解液密度,用户在上位机完成测试参数设置,自动对电池的各项数据进行存储和报警。文中详细介绍了系统组成、硬件和软件设计。实践证明该检测系统满足实际需求。     

A Pareto-improving hybrid rationing and pricing policy with multiclass network equilibria

This paper extends the work on Pareto-improving hybrid rationing and pricing policy for general road networks by considering heterogeneous users with different values of time. Mathematical programming models are proposed to find a multiclass Pareto-improving pure road space rationing scheme (MPI-PR) and multiclass hybrid rationing and pricing schemes (MHPI and MHPI-S). A numerical example with a multimodal network is provided for comparing both the efficiency and equity of the three proposed policies. We discover that MHPI-S can achieve the largest reduction in total system delay, MHPI can induce the least spatial inequity and MHPI-S is a progressive policy which is appealing to policy makers. Furthermore, numerical results reveal that different classes of users react differently to the same hybrid policies and multiclass Pareto-improving hybrid schemes yield less delay reduction when compared to their single-class counterparts.     

隧道开挖中的应力旋转和裂隙塑性变形问题研究

通过对隧道开挖过程进行三维数值模拟,分析了隧道开挖过程中主应力方向的旋转变化,研究了主应力旋转与隧道裂隙塑性变形的关系,验证了"考虑应力主轴旋转的广义塑性原理"的正确性,并将数值模拟结果和相关试验成果进行了对比,得出了一致性的结论。研究结果表明,应力旋转基本在隧道开挖前后10 m左右的距离内完成,隧道开挖过程中的应力旋转可以引起裂隙塑性变形的突变,且对竖向和斜向裂隙的影响较大;可以根据应力旋转的变化规律合理地选择支护时机,依据应力旋转对裂隙的影响对隧道的重点部位进行超前加固。     

Real time queue length estimation for signalized intersections using travel times from mobile sensors

We study how to estimate real time queue lengths at signalized intersections using intersection travel times collected from mobile traffic sensors. The estimation is based on the observation that critical pattern changes of intersection travel times or delays, such as the discontinuities (i.e., sudden and dramatic increases in travel times) and non-smoothness (i.e., changes of slopes of travel times), indicate signal timing or queue length changes. By detecting these critical points in intersection travel times or delays, the real time queue length can be re-constructed. We first introduce the concept of Queue Rear No-delay Arrival Time which is related to the non-smoothness of queuing delay patterns and queue length changes. We then show how measured intersection travel times from mobile sensors can be processed to generate sample vehicle queuing delays. Under the uniform arrival assumption, the queuing delays reduce linearly within a cycle. The delay pattern can be estimated by a linear fitting method using sample queuing delays. Queue Rear No-delay Arrival Time can then be obtained from the delay pattern, and be used to estimate the maximum and minimum queue lengths of a cycle, based on which the real-time queue length curve can also be constructed. The model and algorithm are tested in a field experiment and in simulation.     

输水盾构隧洞复合衬砌结构设计计算研究

软土有压输水盾构隧洞采用管片外衬和整筑预应力内衬作复合式衬砌的设计计算中,为能较好考虑内衬与外衬管片的相互作用,以及内衬预应力荷载在隧洞施工和运营各阶段对复合衬砌结构受力的影响,本文提出了一种新的实体叠合计算模型。由于确定管片纵缝接头抗弯刚度的复杂性,文中建议对用数值模拟管片纵缝接头刚度采用了一种非线性耦合弹簧＂接触对＂的模拟系统。在采用实体单元建模的条件下,由于计入管片接头刚度的力学处理困难,文中研究了一种能以模拟管片接头刚度的简化计算方法。根据内、外衬砌接触界面处理方式的不同,文中提出了5种适合不同界面条件内、外层衬砌的相互作用模型。此外,本文还研制了内衬预应力荷载的一种转化程序,以解决采用等效荷载法施加预应力时的前处理问题。上述各点创意构思已在南水北调中线一期穿黄隧洞的结构设计研究中得到了具体反映和成功应用。