Modeling the structural relationships among short-distance travel amounts,perceptions, affections,and desires

Using structural equation modeling, the relationships among travel amounts, perceptions, affections, and desires across five short-distance (one-way trips of less than 100 miles) travel categories (overall, commute, work/school-related, entertainment/social/recreation, and personal vehicle) are examined. The models are estimated using data collected in 1998 from more than 1300 working commuters in the San Francisco Bay Area. A cross-model analysis reveals three robust relationships, namely: (1) myriad measures of travel amounts work together to affect perceptions; (2) perceptions are consistently important in shaping desires; and (3) affections have a positive relationship with desires. The second finding suggests that two individuals who travel the same objective amount may not have the same desire to reduce their travel: how much individuals perceive their travel to be is important. The third point argues that the degree to which travel is enjoyed is a key determinant of shaping desires to reduce travel: the more travel is enjoyed, the less the desire to reduce it.     

Decision support for risk assessment of mid-air collisions via population-based measures

Specifying proximity warning functions for aircraft in managed airspace has received considerable attention. However, similar functions for aircraft operating in unmanaged airspace have received comparatively little analysis despite the fact that these functions are stressed to a greater physical degree, and perhaps more frequently, than in managed airspace. The mid-air collision hazard and its associated risk are re-examined from both an historical and a systematic engineering modelling viewpoint. Historic measures of this transport risk in managed airspace have been based on fatalities normalized by flight hours or flight movements. However some of these data may not be available in unmanaged airspace. Another approach to measurement directs attention to populations at risk where several measures are now well known: collective risk, individual risk and the frequency of occurrence of the hazards that give rise to such risk. A decision support methodology is presented that relates both transport and population-based approaches. A cohesive and consistent set of aspired goals for various stakeholder groups can be set taking into account the different stakeholder needs. A case study is drawn from historic mid-air collision data to illustrate the process. A consistent basis for national-level policy decisions harmonised with proactive engineering design requirements is achieved. The strengths, limitations and implications of this approach for engineering design purposes are discussed.     

Maintenance optimization for transportation systems with demand responsiveness

We present a quadratic programming framework to address the problem of finding optimal maintenance policies for multifacility transportation systems. The proposed model provides a computationally-appealing framework to support decision making, while accounting for functional interdependencies that link the facilities that comprise these systems. In particular, the formulation explicitly captures the bidirectional relationship between demand and deterioration. That is, the state of a facility, i.e., its condition or capacity, impacts the demand/traffic; while simultaneously, demand determines a facility’s deterioration rate. The elements that comprise transportation systems are linked because the state of a facility can impact demand at other facilities. We provide a series of numerical examples to illustrate the advantages of the proposed framework. Specifically, we analyze simple network topologies and traffic patterns where it is optimal to coordinate (synchronize or alternate) interventions for clusters of facilities in transportation systems.     

Socio-demographic and built environment influences on the odds of being overweight or obese: The Atlanta experience

This paper explores the association of socio-demographic and built environment characteristics on the odds of being overweight and obese using data from the Atlanta SMARTRAQ travel survey. A new methodological framework based on a multinomial logit (MNL) model and an enhanced odds ratio plot is presented. The use of an MNL model overcomes limitations of many prior studies that employ a sequence of binary logit models to examine multiple weight categories. The use of an enhanced odds ratio plot provides important information into the relative importance of socio-demographic and built environment characteristics. Several new findings for the Atlanta area result from this study. Socio-demographic variables, including age and educational attainment, exhibit a non-linear relationship with the odds of being overweight or obese. Gender, age, ethnicity, and educational attainment are strongly associated with the odds of being overweight or obese, while income and number of students between 5 and 16 years old in the household have smaller effects. Built environment characteristics such as increased net residential densities and enhanced street connectivity are associated with reductions in the odds of being overweight and/or obese. Relative to socio-demographic variables, however, such built environment characteristics have a much smaller impact on describing the odds of being overweight or obese.     

Assessment of diesel combustion noise overall level in transient operation

Combustion noise in passenger cars powered with direct injection (DI) diesel engines is frequently the main reason why end-users are reluctant to drive this type of vehicle. Thus, the great potential of diesel engines for environment preservation — due to their lower CO₂ emissions — could be missed. This situation worsens with the current design trends (engine downsizing) and the emerging new diesel combustion concepts (Homogeneous Charge Compression Ignition-HCCI, Premixed Charge Compression Ignition-PCCI, etc.), which are intrinsically noisy. This negative feature can be even more critical in transient operation due to the contribution of the temporal changes of both source and transmission path on engine noise. Therefore, combustion noise must be considered as an additional essential factor in engine development, together with performance, emissions and driveability. Thus, suitable evaluation procedures that can be integrated into the global engine development process in a timely and cost-effective manner are imperative. Regarding the evaluation procedures, most of the work available in the literature addressed combustion noise at steady operation. To surpass this limitation, two possible approaches — adapted from the classical and multiple regression methods — for the overall level assessment of combustion noise in transient conditions are evaluated in this paper.     

汽车筒式液阻减振器技术的发展

分析了汽车乘坐舒适性／行驶平顺性和操作稳定性对筒式液阻减振器特性的要求，提出汽车在不同行驶工况减振器特性的要求是不的；分析了被动式减振器的发展历程及非充气和充气减振器的特点，阐述了机械控制式可调阻尼减振器，电子控制式减振器以及电流变和磁流变液体减器等的结构特点，工作原理及其动态特性；分析了筒式液阻减振器其于经验设计／实验修正开发方法的缺点，阐述了基于CAD／CAE技术的现代设计开发方法的过程及其关键问题，最后分析了我国筒式液阻减振器技术的发展状况及问题，展望了减振器技术的发展前景。     

Evaluation of forced flows on freeways with single‐loop detectors

This paper documents the development of a simple method for identifying and/or predicting freeway congestion using single loop detection systems. The proposed algorithm is simple and easy to incorporate into most freeway management systems. The Washington State Department of Transportation's Traffic Systems Management Center (TSMC) sponsored the original study. The investigation also led to a recommendation to replace the original TSMC definition of congestion or forced flow conditions with a more reliable indicator. Although, the TSMC has recently implemented a more advanced prediction system based on fuzzy set theory and neural networks to further identify patterns and rules for ramp metering strategies, the findings presented here continue to be constructive to freeway managers looking for quick and easy analyses that rely solely on single‐loop detection systems. The Seattle Area freeway study section used for the original study was the portion of mainline 1–5 northbound starting at the downtown Seattle Station 108 and ending at the Mountlake Terrace Station 193. Several days' worth of volume and lane‐occupancy data were collected for the afternoon time period from 2:30 p.m. to 6:30 p.m. Time intervals of 20 seconds were chosen for each data collection period. Important products of this research include the following:

• simple, and more reliable criterion for the definition of “bottleneck” or forced flow conditions than that originally used by the TSMC.
• simple, and reliable criterion for predicting impending “bottlenecks” or forced flow conditions.
• A proposed variable for improved selection of the appropriate metering rate. (Further analysis of the use of this variable for determining metering rates is recommended for future studies.

The proposed criteria are simple and easy to incorporate into current freeway management computer systems. Further investigation of freeway performance measurement using volume and occupancy data obtained from single‐loop systems is currently being performed.     

The stability of stochastic equilibrium in a two-link transportation network

Most research and applications of network equilibrium models are based on the assumption that traffic volumes on roadways are virtually certain to be at or near their equilibrium values if the equilibrium volumes exist and are unique. However, it has long been known that this assumption can be violated in deterministic models. This paper presents an investigation of the stability of stochastic equilibrium in a two-link network. The stability of deterministic equilibrium also is discussed briefly. Equilibrium is defined to be stable if it is unique and the link volumes converge over time to their equilibrium values regardless of the initial conditions. Three models of route choice decision-making over time are formulated, and the stability of equilibrium is investigated for each. It is shown that even when equilibrium is unique, link volumes may converge to their equilibrium values, oscillate about equilibrium perpetually, or converge to values that may be considerably different from the equilibrium ones, depending on the details of the route choice decision-making process. Moreover, even when convergence of link volumes to equilibrium is assured, the convergence may be too slow to justify the standard assumption that these volumes are usually at or near their equilibrium values. When link volumes converge to non-equilibrium values, the levels at which the volumes stabilize typically depend on the initial link volumes or perceptions of travel costs. Conditions sufficient to assure convergence to equilibrium in two of the three models of route choice decision-making are presented, and these conditions are interpreted in terms of the route choice decision-making process.     

Design and Practice of Cloud Computing Platform for TBM Operation Information北大核心CSCD

The problems of TBM construction data loss, information barriers and absence of data mining have con⁃ strained the advancement of basic technologies in TBM field. Aimed at building a cloud computation platform for TBM operation information, a new concept of 3B, i. e. Born by digit, Born in format and Born to the cloud, was pre⁃ sented, the issues of information acquisition, transmission and storage during TBM operation were solved, and massive heterogeneous information intelligent transmission system and big data warehouse of TBM group were established. A structure model of cloud computation platform was designed by taking Hadoop system as ecosphere, and a cloud computation platform was built to deploy related algorithm, realizing on-line monitoring and data sharing, further⁃ more the data law mining of interaction of rock mass versus TBM machine was conducted based on big data tech⁃ nique, exploring the development direction of the information platform. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

既有铁路桥梁声屏障的高速列车脉动风致响应

采用SAP2000有限元软件,建立了既有桥梁声屏障的有限元模型,混凝土插板与H型钢立柱之间的连接采用位移和转角弹簧模拟.探讨了脉动力采用多点输入和一致输入,跨度16,24和32 m的铁路桥梁声屏障的动力响应,分析了声屏障的位移峰值、弯矩峰值和动力放大系数的分布特征.结果表明,常用跨度铁路桥梁声屏障的行波效应系数均小于1;声屏障立柱的位移和挑梁弯矩的最大值随桥梁跨度增大而减小;声屏障挑梁刚度过小,跨度16 m的铁路桥梁声屏障立柱的最大位移达15.5 mm.