Railway wheel-flat detection and measurement by ultrasound

This work presents an innovative ultrasound technique designed to detect and quantify flats formed in the rolling surface of railway wheels. Differently from other approaches, ultrasonic pulses (Rayleigh waves) are sent over a measuring rail. The variations in the round-trip time of flight (RTOF) of the ultrasound pulse to the rail-wheel contact point allow detecting and quantifying the wheel-flats. In spite of the wear state of the irregularity, the method provides the loss of material and the length of the flat originally formed by abrasion. A theoretical background supports the technique which offers many advantages for railway maintenance. Simulations and experimental results match the expected ones.     

Simulating the impacts of household travel on greenhouse gas emissions,urban air quality,and population exposure

This paper establishes a link between an activity-based model for the Greater Toronto Area (GTA), dynamic traffic assignment, emission modelling, and air quality simulation. This provides agent-based output that allows vehicle emissions to be tracked back to individuals and households who are producing them. In addition, roadway emissions are dispersed and the resulting ambient air concentrations are linked with individual time-activity patterns in order to assess population exposure to air pollution. This framework is applied to evaluate the effects of a range of policy interventions and 2031 scenarios on the generation of vehicle emissions and greenhouse gases in the GTA. Results show that the predicted increase of approximately 2.6 million people and 1.3 million jobs in the region by 2031 compared to 2001 levels poses a major challenge in achieving meaningful reductions in GHGs and air pollution.     

Increasing the capacity of signalized intersections with separate left turn phases

A separate turn phase is often used on the approach leg to an intersections with heavy left turns. This wastes capacity on the approach because some of its lanes cannot discharge during its green phases. The paper shows that the problem can be eliminated by reorganizing traffic on all the lanes upstream of an intersection using a mid-block pre-signal. If drivers behave deterministically, the capacity that can be achieved is the same as if there were no left turns. However, if the reorganization is too drastic, it may be counterintuitive to drivers. This can be remedied by reorganizing traffic on just some of the available lanes. It is shown that such partial reorganization still increases capacity significantly, even if drivers behave randomly and only one lane is reorganized. The paper shows how to optimize the design of a pre-signal system for a generic intersection. It also identifies both, the potential benefits of the proposed system for a broad class of intersections, and the domain of application where the benefits are most significant.     

The accuracy of proxy responses in a stated choice setting: A re-examination and some controversial conclusions

Data is typically gathered from an individual respondent who represents the group or the household. This individual is often identified as the “primary decision maker” and is asked to provide responses as a proxy for the group given that the cost of interviewing each member individually is impractical and/or expensive. The collection of joint preferences is rarely undertaken, with the use of proxy responses not uncommon in travel behaviour research. Under such a framework, there exists an assumption that the primary decision maker has perfect knowledge of other group member preferences, and bargaining behaviour, and is able to synthesise this information when providing a response on their behalf. The validity of such an assumption however remains an open question, with recent research calling the reliability of proxy responses into account (Bateman and Munro, 2009). In this paper, using three models estimated in willingness to pay space, we examine the accuracy of proxy responses in a stated choice experiment. We find that there is overlap between a proxy response and the own preferences of the individual providing the proxy choice, but while the proxy responses fail to represent the full preference heterogeneity that exists in the actual choices made by individuals, the proxy responses in aggregate provide a suitable replacement for actual data, subject to a number of caveats.     

A proposal for cost-related and market-oriented train running charges

This paper examines some key aspects of a charging system for promoting railway transport, including charges reflecting a clear relationship with costs (transparency) and charges reflecting the quality of the infrastructure manager's service. Train running charges recover track-related costs and can help to develop a charging system that meets these requirements. To orient train running charges to the market, a method for processing track maintenance and renewal costs is proposed whereby the quality of the service provided by an infrastructure is measured according to its utility to the railway undertaking. To achieve transparency, a single indicator is used for cost planning and the subsequent levying of costs on railway undertakings. The paper includes an example of how proposed train running charges would be calculated according to data from 14 European countries. The example shows that short-distance trains generate the lowest maintenance and renewal costs, followed by long-distance trains and freight trains.     

Trip generation and distribution: the inconsistency problem and a possible remedy

There are many shortcomings commonly associated with the conventional urban transportation modeling process. This paper focuses on one of the more important problems — the inconsistency between trip generation and distribution components — and suggests a possible way of alleviating it. The suggested approach involves sorting out the independent effects on tripmaking of origin, destination and travel cost characteristics, and introducing accessibility measures explicitly into the modeling process. The resulting modeling framework can be used to obtain consistent estimates of trip generation and distribution quantities which are responsive to changes in the transportation and spatial systems.     

The identification and empirical characterization of vehicular (Lagrangian) fundamental diagrams in multilane traffic flow

Traditional macroscopic traffic flow modeling framework adopts the spatial–temporal coordinate system to analyze traffic flow dynamics. With such modeling and analysis paradigm, complications arise for traffic flow data collected from mobile sensors such as probe vehicles equipped with mobile phones, Bluetooth, and Global Positioning System devices. The vehicle‐based measurement technologies call for new modeling thoughts that address the unique features of moving measurements and explore their full potential. In this paper, we look into the concept of vehicular fundamental diagram (VFD) and discuss its engineering implications. VFD corresponds to a conventional fundamental diagram (FD) in the kinematic wave (KW) theory that adopts space–time coordinates. Similar to the regular FD in the KW theory, VFD encapsulates all traffic flow dynamics. In this paper, to demonstrate the full potential of VFD in interpreting multilane traffic flow dynamics, we generalize the classical Edie's formula and propose a direct approach of reconstructing VFD from traffic measurements in the vehicular coordinates. A smoothing algorithm is proposed to effectively reduce the nonphysical fluctuation of traffic states calculated from multilane vehicle trajectories. As an example, we apply the proposed methodology to explore the next‐generation simulation datasets and identify the existence and forms of shock waves in different coordinate systems. Our findings provide empirical justifications and further insight for the Lagrangian traffic flow theory and models when applied in practice. Copyright © 2015 John Wiley & Sons, Ltd.     

Redefining activity types: Who participates in which leisure activity?

This paper analyzes the activity choices of individuals and the links between socio-demographics, daily schedules and activity attributes using a new activity choice framework. Activities are first clustered into groups based on their salient attributes, such as duration, frequency, flexibility, planning times, and number of involved persons, rather than their functional types (work, leisure and household obligations), using a K-means cluster technique. This led to the creation of several new activity groups such as “long, temporally fixed, personally flexible activities”, “short and flexible activities”. These activity groups form the choice set for the mixed logit activity choice modeling structure developed for the leisure activities in the second part of the paper. The model results reveal the significant relationships between socio-demographics, temporal characteristics, and characteristics of the schedules on leisure activity choice. The results demonstrate how changing demographics and other activities in individuals’ schedules may affect the nature of the leisure activities and present the substitution and complimentary effects that these new activity groups have on one another.     

Influence of vehicle driving parameters on the noise caused by passenger cars in urban traffic

In this work, a sample of vehicles has been instrumented to measure of variables that influence vehicle noise emissions in Madrid. A circuit reproducing a normal travel pattern in large city is traveled by a fleet of vehicle models representing the fleets of cars in a European city. A sample of drivers covers the test track under different traffic conditions. Driving parameters and noise emitted have been recorded in each test and average values have been extracted. These data have been analyzed to define the noise emissions produced by a vehicle in real driving conditions and to identify the noisiest driving behaviors.     

Are Longer and Heavier Vehicles (LHVs) Beneficial for Society? A Cost Benefit Analysis to Evaluate their Potential Implementation in Spain

Abstract

In this paper we carry out a thorough review of the current research related to the benefits and costs arising from the implementation of longer and heavier vehicles (LHVs). From this review we concluded that despite the many studies available, little has been said about the sensitivity of the benefits and costs to the ultimate performance of the key variables related to the evolution of the economy, road transport performance, safety, and so on. In order to fill this gap, we have designed a sensitivity approach based on a cost benefit analysis tool to determine which variables demonstrate the greatest influence on the benefits and costs stemming from the implementation of LHVs. In order to test the methodology, we have used it in an analysis of the Spanish trunk network. The results show that the benefits of LHVs for society are significant. Even in the least favorable scenario, the economic benefits are greater than €3500 million over 15 years, and the environment enhanced as well, for CO₂ emissions are reduced by 2 Million tonnes. Overall we noted how the results are not very sensitive to the evolution of key variables in determining the final outcome. However, we found that the variables that have the greatest affect on the final benefit, such as traffic growth and social discount rate, depend basically on the performance of the overall economy. Moreover, the private cost for haulers seems to be more important in determining the final benefit than externality costs.