Past,present, and future of the satellite-based automatic identification system: areas of applications (2004–2016)

In 2016, the world shipping fleet grew by 3.5%. Even if the annual growth rate remains at its lowest since 2013, the global situation is still in overcapacity (UNCTAD 2016). Ninety percent of global trade, by volume, is done by sea. Monitoring this fleet helps with vessel navigation, informing to help avoid critical situations such as collisions, accidents leading to oil pollution, grounding, or ships in distress, but also because traffic management in congested areas is essential. For system wide management, in regions such as MPAs (marine protected areas), conservation is the key factor, and movements can be monitored and analyzed in order to determine illegal or suspicious activities, or in order to limit and/or divert traffic, to mitigate the risks to species subject to protection. It is among these efforts that the automatic identification system (AIS) can play a key role. Since 2004, this VHF transceiver-based reporting system, imposed by the International Maritime Organization (IMO), has shifted from a traditional vessel identification device to a tool used in a wide variety of applications. The most common uses are safety and security; these issues are quite visible in the media and may touch more people on a global scale (e.g., piracy, oil spills). Over the years, AIS has become, especially with the emergence of the satellite-based capture of the signal in 2011, a widely used tool for developing applications such as fisheries monitoring, marine conservation, air pollution forecasting and modeling, ballast water monitoring, invasive species transport, and many more. In this paper, we propose to review the peer-reviewed publications related to the uses and applications of the AIS.     

The role of incentives towards adolescents’ commitment to use public transport in Malaysia

This study examines the adoption of a travel behaviour modification programme to encourage sustainable mobility and public bus usage. Students from four schools in Penang Island were recruited and divided into two groups: Group 1 (without incentives) and Group 2 (with incentives). In the experiment, after having a motivation session about sustainable transport, the respondents were asked to design their travel patterns for seven days. The next session gathered data about their actual travel and asked for feedback regarding the programme. The results demonstrate that incentives encouraged respondents to follow their plans for travel behaviour and public bus usage. The results highlight that their commitment to follow their travel plans were influenced by ethnicity, distance from home to school, travel time, and household income. The study offers some discussion regarding the implications of the results for strengthening sustainable mobility and encouraging public bus use among adolescents.     

Effect of injection angle on artificial cavitation using the design of experiment method

Using the supercavitation phenomenon is necessary to reach high velocities underwater. Supercavitation can be achieved in two ways: natural and artificial. In this article, the simulation of flows around a torpedo was studied naturally and artificially. The validity of simulation using theoretical and practical data in the natural and artificial phases was evaluated. Results showed that the simulations were consistent with the laboratory results. The results in different injection coefficient rates, injection angles, and cavitation numbers were studied. The obtained results showed the importance of cavitation number, injection rate coefficient, and injection angle in cavity shape. At the final level, determining the performance conditions using the Design of Experiment (DOE) method was emphasized, and the performance of cavitation number, injection rate coefficient, and injection angle in drag and lift coefficient was studied. The increase in injection angle in the low injection rate coefficient resulted in a diminished drag coefficient and that in the high injection rate coefficient resulted in an enhanced drag coefficient.     

Making mode detection transferable: extracting activity and travel episodes from GPS data using the multinomial logit model and Python

The increasing popularity of global positioning systems (GPSs) has prompted transportation researchers to develop methods that can automatically extract and classify episodes from GPS data. This paper presents a transferable and efficient method of extracting and classifying activity episodes from GPS data, without additional information. The proposed method, developed using Python®, introduces the use of the multinomial logit (MNL) model in classifying extracted episodes into different types: stop, car, walk, bus, and other (travel) episodes. The proposed method is demonstrated using a GPS dataset from the Space-Time Activity Research project in Halifax, Canada. The GPS data consisted of 5127 person-days (about 47 million points). With input requirements directly derived from GPS data and the efficiency provided by the MNL model, the proposed method looks promising as a transferable and efficient method of extracting activity and travel episodes from GPS data.     

Developing an activity-based trip generation model for small/medium size planning agencies

The primary shortcoming of traditional four-step models is that they cannot capture derived travel demand behaviors. However, travel demand modeling (TDM) is an essential input for urban transportation planning. TDM needs to be highly precise and accurate by integrating the accurate base year estimation along with suitable alternatives. Currently, activity-based models (ABMs) have been developed mostly for large metropolitan planning organizations (MPO), whereas smaller/medium-sized MPOs typically lack these models. The main reason for this disparity in ABM development is the complexity of the models and the cost and data requirements needed. We posit however that smaller MPOs could develop ABMs from traditional travel surveys. Therefore, the specific aim of this paper is to develop a probabilistic home-based destination activity trip generation model considering travel time behavior. Results show that the developed model can significantly capture the actual number of trip generations.     

Analysis of Wave Energy Resources Around the Saint Martin Island in Bangladesh

Saint Martin Island is the only coral island and one of the well-known tourist spots in Bangladesh. Because of its geographic location, electricity cannot be su...     

A conceptual model of the strongly tidal Columbia River plume

The Columbia River plume is typical of large-scale, high discharge, mid-latitude plumes. In the absence of strong upwelling winds, freshwater from the river executes a rightward turn and forms an anticyclonic bulge before moving north along the Washington coast. In addition to the above dynamics, however, the river plume outflow is subject to large tides, which modify the structure of the plume in the region near the river mouth. Observations based on data acquired during a summer 2005 cruise indicate that the plume consists of four distinct water masses; source water at the lift-off point, and the tidal, re-circulating and far-field plumes. In contrast to most plume models that describe the discharge of low-salinity estuary water into ambient high-salinity coastal water, we describe the Columbia plume as the superposition of these four plume types.We focus primarily on a conceptual summary of the dynamics and mutual interaction of the tidal and re-circulating plumes. The new tidal plume flows over top of the re-circulating plume and is typically bounded by strong fronts. Soon after the end of ebb tide, it covers roughly 50–100% of the re-circulating plume surface area. The fronts may penetrate well below the re-circulating plume water and eventually spawn internal waves that mix the re-circulating plume further. The re-circulating plume persists throughout the tidal cycle and corresponds to a freshwater volume equivalent to 3–4 days of river discharge. Finally, the plume water masses are distinguished from one another in term of surface chlorophyll concentration, suggesting that the above classification may also describe different biological growth regimes. The low-salinity re-circulating plume serves as an extension of the estuary into the coastal ocean, or an “estuary at sea”, because residence times during periods of high river flow are greater than those in the estuary.     

Experiments on the survival of six brackish macro-invertebrates from the Baltic Sea after dredged spoil coverage and its implications for the field

Physical disturbance by disposal of dredged materials in estuarine and coastal waters may result in burial of benthic fauna. Survival rates depend on a variety of factors including the type and amount of disposed materials and the lifestyle of the organisms. Laboratory burial experiments using six common macrobenthic invertebrates from a brackish habitat of the western Baltic Sea were performed to test the organisms' escape reaction to dredged material disposal. Experimental lab-results were then extrapolated to a field situation with corresponding bottom topography and covering layer thicknesses at experimental field disposal study sites. Resulted survival rates were then verified by comparison with results of an earlier field study at the same disposal sites.Our experimental design in the lab included the disposal of two types of dredged material (i.e. ‘till’ and ‘sand/till mixture’) and two covering layer depths (i.e. 10–20 cm and 14–40 cm). All three bivalves Arctica islandica (Linnaeus), Macoma balthica (Linnaeus), Mya arenaria (Linnaeus) and the polychaete Nephtys hombergii (Savigny) successfully burrowed to the surface of a 32–41 cm deposited sediment layer of till or sand/till mixture and restored contact with the overlying water. These high escape potentials could partly be explained by the heterogeneous texture of the till and sand/till mixture with ‘voids’. The polychaete Bylgides (Harmothoe) sarsi (Malmgren) successfully burrowed through a 16 cm covering layer whereas the polychaete Lagis koreni (Malmgren) showed almost no escaping reaction. No general differences in escape behaviour after burial were detected between our test species from the brackish habitat and those reported in the literature for the same species in marine environments. However, a size-dependence in mobility of motile polychaetes and M. arenaria was apparent within our study. In comparison to a thick coverage, thin covering layers (i.e. 15–16 cm and 20 cm) increased the chance of the organisms (N. hombergii and M. arenaria) to reach the sediment surface after burial. This was not observed for the other test species. While crawling upward to the new sediment surfaces burrowing velocities of up to 8 cm d^− 1 were observed for the bivalves and up to 20 cm d^− 1 for N. hombergii. Between 17 and 79% of the test organisms showed burrowing activity after experimental burial. The survival rate (defined as the ability to regained contact with the sediment surface) ranged from 0 to 33%, depending on species and on burial depth. The organisms reached the sediment surface by burrowing (polychaetes and bivalves) and/or by extending their siphons to the new sediment surface (bivalves). The extrapolation of laboratory survival rates to the two disposal sites was obtained based on the in situ thicknesses of the dredged spoil layers measured by multi-beam echo sounder. This resulted in total average survival rate estimates for the test species of 45 and 43% for the two disposal sites. The results obtained during the laboratory tests and the following extrapolation to the field were verified by the range of results from a previous field study, using grab sampling shortly before and after a disposal event in June 2001. The effect of dredged material disposal on the tested Baltic Sea benthic macrofauna was assessed by extrapolating the verified laboratory results to the field.     

Annual cycle of distribution of three ice-associated copepods along the coast near Dumont d'Urville, Terre Adélie (Antarctica)

In polar regions sea ice is a site of enhanced primary production during winter and provides important habitat for small grazers, such as copepods. We sampled zooplankton from the sea ice and water column throughout 2005, near Dumont d'Urville station (Terre Adélie, Antarctica). Three species of ice-associated copepods were found: two calanoid copepods Paralabidocera antarctica and Stephos longipes and the harpacticoid copepod Drescheriella glacialis. P. antarctica was the most abundant of the three and was closely associated with the sea ice during most of the year. This species had a one year life cycle with a probable over-wintering period in the sea ice as nauplii and a short copepodite phase in spring. Reproduction and spawning occurred in early summer. A comparison with two other populations (near Syowa and Davis stations) along the east coast of Antarctica showed that there was a temporal shift in the life cycles of the three populations, which was linked to variability in sea ice conditions. D. glacialis was the second most abundant copepod and was more common during the winter than during summer, indicating its preference for the sea ice habitat. In autumn, the presence of D. glacialis in the deeper part of the water column suggested that this species colonised the sea ice from the benthos. S. longipes was found only in the water column near Dumont d'Urville and was not very abundant. In Terre Adélie particular environmental conditions, such as the absence of a permanent sea ice zone throughout the year, a longer time of open water, strong katabatic winds and the presence of polynyas, have influenced both the abundance and distribution of the three common ice-associated copepods.     

Effects of intake flow on the spray structure of a multi-hole injector in a DISI engine

The spray characteristics of a 6-hole injector were examined in a single cylinder optical direct injection spark ignition engine. The effects of injection timing, in-cylinder charge motion, fuel injection pressure, and coolant temperature were investigated using the 2-dimensional Mie scattering technique. It was confirmed that the in-cylinder charge motion played a major role in the fuel spray distribution during the induction stroke while injection timing had to be carefully considered at high injection pressures during the compression stroke to prevent spray impingement on the piston.