A three-stage least squares approach to the analysis of airline strategies for aircraft size and airline frequency on the north Atlantic: an airline case study

In response to increasing demand, airlines may increase capacity by increasing the frequency of flights or they may choose to increase aircraft size. This may yield operating cost economies. If the airports they operate from are capacity constrained, they will be limited in the extent that they can change frequency which will limit their ability to compete with the number of frequencies offered. This article focuses on this trade-off and pays particular attention to the practices of a specific airline. Conclusions are offered on the impact of inter alia competition, changes in aircraft technology, 9/11 and the impact of slot constraints. It appears that changes in size are more important than frequency, which is consistent with the presence of slot constraints and there is a significant impact of competition. As the concentration of carriers increases, so aircraft size falls. 9/11 also has a significant impact on traffic whereas the introduction of the Boeing 777, as an illustration of a change in technology, does not.     

Optimization of Fare Structure and Service Frequency for Maximum Profitability of Transit Systems

Abstract

Providing efficient public transportation has been recognized as a potential way of alleviating congestion, improving mobility, mitigating air pollution, and reducing energy consumption. Many people use public transportation systems for their daily commute, while others use different transportation modes (e.g. cars, taxis, carpools, etc.). Inexpensive fares with good transit service encourages ridership, and the resulting revenue may be used to provide better service. Optimization of transit service frequency and its associated fare structure is desirable in order to increase revenue at reasonable transit operating expenditure. The objective of the study reported here is to maximize profit subject to service capacity constraint, while elastic demand is considered. The solution methodology is developed and applied to solve the profit maximization problem in a case study based on Newark, NJ, USA. Numerical results, including optimal solutions and sensitivity analyses, are presented. It is found that an optimal temporal headway and differential fare structure that maximizes total profit for the studied subway system can be efficiently solved.     

Node-based scheduling method for easy migration from CAN to FlexRay in in-vehicle networking systems

As vehicles become more intelligent, in-vehicle networking (IVN) systems such as controller area network (CAN) are essential for the convenience and safety of drivers. To expand the applicability of IVN systems, attention is currently being focused on chassis networking systems that require increased network capacity and real-time capabilities. FlexRay was developed to replace CAN protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. However, FlexRay network systems require a complex scheduling method, which is a barrier to their implementation as chassis networking systems. In particular, if we want to migrate from a CAN network to a FlexRay network using the well-defined CAN message database, which has been specifically constructed for chassis networking systems by automotive vendors, a new type of scheduling method is necessary to reduce scheduling efforts during the software development process. This paper presents a node-based scheduling method for easy migration from a CAN network to a FlexRay network system. To demonstrate the feasibility of the technique, its performance is evaluated in terms of various software complexity indices.     

Road boundary detection and tracking for structured and unstructured roads using a 2D lidar sensor

Road boundaries can give useful information for evaluating safe vehicle paths in intelligent vehicles. Much previous research has studied road boundary detection, using different types of sensors such as vision, radar, and lidar. Lidar sensors, in particular, show advantages for road boundary extraction including high resolution and wide field of view. However, none of the previous studies examined the problem of detecting road boundaries when roads could be either structured or unstructured. In this study, we developed a road boundary detection and tracking algorithm using lidar sensing for both structured and unstructured roads. The algorithm extracts road features as line segments in polar coordinates relative to the lidar sensor. The extracted road features are then tracked with respect to a vehicle’s local coordinates using a nearest neighbor filter. The proposed algorithm accurately detected the road boundaries regardless of the road type.     

Analysis of travel activity determinants using robust statistics

This study investigates travel behavior determinants based on a multiday travel survey conducted in the region of Ghent, Belgium. Due to the limited data reliability of the data sample and the influence of outliers exerted on classical principal component analysis, robust principal component analysis (ROBPCA) is employed in order to reveal the explanatory variables responsible for most of the variability. Interpretation of the results is eased by utilizing ROSPCA. The application of ROSPCA reveals six distinct principal components where each is determined by a few variables. Among others, our results suggest a key role of variable categories such as journey purpose-related impedance and journey inherent constraints. Surprisingly, the variables associated with journey timing turn out to be less important. Finally, our findings reveal the critical role of outliers in travel behavior analysis. This suggests that a systematic understanding of how outliers contribute to observed mobility behavior patterns, as derived from travel surveys, is needed. In this regard, the proposed methods serve for processing raw data typically used in activity-based modelling.     

Reliability-based sensitivity analysis of vehicle components with non-normal distribution parameters

Techniques from the perturbation method, fourth moment method, reliability-based design theory, and sensitivity analysis approach are employed to present a practical and efficient method for testing the reliability sensitivity of vehicle components with non-normal distribution parameters. With the condition that the first four moments of original random variables are known, the reliability sensitivity theory and cases are researched using the presented numerical method. The variation regularities of reliability sensitivity are obtained and the effects of design parameters on reliability of the vehicle components are studied. The sophisticated formulation provided in this paper is easily amenable to computational procedures. The respective program can be used to obtain the reliability sensitivity of vehicle components with non-normal distribution parameters accurately and quickly. The results obtained are perfect and the solutions compared very well with those from Monte Carlo simulation. The method presents a theoretic basis for the reliability design of the vehicle components.     

Model-based control system design in a urea-SCR aftertreatment system based on NH3 sensor feedback

This paper presents preliminary control system simulation results in a urea-selective catalytic reduction (SCR) aftertreatment system based on NH₃ sensor feedback. A four-state control-oriented lumped parameter model is used to analyze the controllability and observability properties of the urea-SCR plant. A model-based estimator is designed via simulation and a control system is developed with design based on a sliding mode control framework. The control system based on NH₃ sensor feedback is analyzed via simulation by comparing it to a control system developed based on NO_x sensor feedback. Simulation results show that the NH₃ sensor-based strategy performs very similarly in comparison to a NO_x sensor-based strategy. The control system performance metrics for NO_x index, urea index, urea usage, and NH₃ slip suggest that the NO_x sensor can be a potential alternative to a NO_x sensor for urea-SCR control applications.     

美国桥梁技术近期发展概况

美国是公认的世界上交通运输网最广泛的国家.随着74 674 km国道系统的建成,并伴随着人们对于旅游和货物运输要求的持续增长,交通便利性已经成为了一种权利.全国统计在册的600 000座桥梁的平均桥龄为45年,这就为推进及推广应用桥梁技术的研究提供了巨大的机会,通过这些技术,可使公路基础设施更新中的桥梁更耐久、更经济,可采用更快速的施工技术及修建更可靠、更便于维护的结构.介绍美国桥梁技术近期发展概况.     

融合可持续理念的交通规划方案比选方法——以亚特兰大大都市区为例

越来越多的机构开始为交通系统的可持续发展定义,并试图将这一概念融入区域交通规划过程.然而,只有极少数的区域规划机构意识到了交通系统和土地利用变化给经济、环境和社会生活质量(这三者通常被认为是可持续交通系统的三个基本方面)带来的广泛影响.首先,论述了使用多个可持续发展指标的多准则决策方法,并应用其评估亚特兰大大都市区的三...