Mixing over the steep side of the Cycladic Plateau in the Aegean Sea

Intensive microstructure sampling over the southern slope of the Cycladic Plateau found very weak mixing in the pycnocline, centered on a thin minimum of diapycnal diffusivity with Kρ=1.5×¹⁰−6 m² s^− 1. Below the pycnocline, Kρ increased exponentially in the bottom 200 m, reaching 1 × 10^− 4 m² s^− 1 a few meters above the bottom. Near-bottom mixing was most intense where the bottom slope equaled the characteristic slope of the semi-diurnal internal tide. This suggests internal wave scattering and/or generation at the bottom, a conclusion supported by near-bottom dissipation rates increasing following rising winds and with intensifying internal waves. Several pinnacles on the slope were local mixing hotspots. Signatures included a vertical line of strong mixing in a pinnacle's wake, an hydraulic jump or lee wave over a downstream side of the summit, and a ‘beam’ sloping upward at the near-inertial characteristic slope. Because dissipation rate averages were dominated by strong turbulence, ?/νN² > 100, the effect on Kρ of alternate mixing efficiencies proposed for this range of turbulent intensity is explored.     

URANS simulations of static and dynamic maneuvering for surface combatant: part 2. Analysis and validation for local flow characteristics

Part 2 of this two-part paper presents the analysis and validation results of local flow characteristics for a surface combatant Model 5415 bare hull under static and dynamic planar motion mechanism simulations. Unsteady Reynolds averaged Navier–Stokes (URANS) computations are carried out by a general-purpose URANS/detached eddy simulation research code CFDShip-Iowa Ver. 4. The objective of this research is to investigate the capability of the code in relation to the computational fluid dynamics-based maneuvering prediction method. In the current study, the ship is subjected to static drift, steady turn, pure sway and pure yaw motions at Froude number 0.28. The free surface, three dimensional vortical structure and, the validation of two dimensional local flow quantities together with the available experimental data are of the interest in the current study. Part 1 provides the verification and validation results of forces and moment coefficients, hydrodynamic derivatives, and reconstructions of forces and moment coefficients from resultant hydrodynamic derivatives.     

自主水下航行器发展概述

自主水下航行器（AUVs）因其应用于海洋勘探而逐渐成为一个有趣的研究对象。波浪滑翔机是一种行驶于波浪表面的无人滑行器（SUV）,它借助海洋能来推动自己,这对于典型的AUVs所采用的电机供能以及昂贵的锚链系统浮标供
　　能来说,是一种技术上的重大跨越。该文讨论了最有效率的AUVs类型。第一部分为每一种类型的发展历程,第二部分为它们各自的技术特点。此外,波浪滑翔机作为应用于海洋部门的一种新型水下机器人,文中简要地给出它的过去,现在以及未来的发展概述。研究波浪滑翔机的意义在于证明它的效率以及实用性,进而取代诸多的AUVs来实现各种实际应用。而研究结果也表明波浪滑翔机确实可以应用于众多领域。对于海洋检测而言,相比于其他AUVs,波浪滑翔机提供了更廉价,更经济,更环保的作业模式,同时也不需要缆绳、船舶等海上作业服务。     

Enabling a viable technique for the optimization of LNG carrier cargo operations

In this study, we optimize the loading and discharging operations of the Liquefied Natural Gas (LNG) carrier. First, we identify the required precautions for LNG carrier cargo operations. Next, we prioritize these precautions using the analytic hierarchy process (AHP) and experts’ judgments, in order to optimize the operational loading and discharging exercises of the LNG carrier, prevent system failure and human error, and reduce the risk of marine accidents. Thus, the objective of our study is to increase the level of safety during cargo operations.     

Biogeography-based combinatorial strategy for efficient autonomous underwater vehicle motion planning and task-time management

Autonomous Underwater Vehicles (AUVs) are capable of spending long periods of time for carrying out various underwater missions and marine tasks. In this paper, a novel conflict-free motion planning framework is introduced to enhance underwater vehicle’s mission performance by completing maximum number of highest priority tasks in a limited time through a large scale waypoint cluttered operating field, and ensuring safe deployment during the mission. The proposed combinatorial route-path planner model takes the advantages of the Biogeography-Based Optimization (BBO) algorithm toward satisfying objectives of both higher-lower level motion planners and guarantees maximization of the mission productivity for a single vehicle operation. The performance of the model is investigated under different scenarios including the particular cost constraints in time-varying operating fields. To show the reliability of the proposed model, performance of each motion planner assessed separately and then statistical analysis is undertaken to evaluate the total performance of the entire model. The simulation results indicate the stability of the contributed model and its feasible application for real experiments.     

Effect of fatigue strain range on properties of high-strength structural steel

Ship hulls are built with stiffened steel plates and experience continuous fatigue load cycles when in service. Mechanical properties of the steel are expected to change due to the application of these cyclic loads. Therefore, the mechanical properties of the material at various levels of fatigue damage need to be understood. This paper presents two test series that were conducted to determine the effect of two different strain ranges (2000 and 3000 micro strains) of fatigue cycles on the mechanical properties of high-strength structural steel. The test results indicate that the cycle-dependent behaviours of the material can cause a slight increase or a significant decrease in the yield strength when compared to its virgin state. However, the ductility of the steel does not change much as the strain cycle increases.     

Local Level Fisheries Management in Diani-Chale,Kenya: Current Status and Future Directions

The current regime of fisheries management and the prospects for attaining a more locally oriented, collaborative system of fisheries management in Diani-Chale, Kenya are examined. At present fisheries management in Diani-Chale is characterized by diminished government capacity for regulation, weakened local institutions, and little ability to exert control over the use of fisheries. Local level management requires the development and use of local institutions that can govern the use of fishery resources. The fish landing sites used by fishers and their associated fishing grounds were identified to be at the appropriate level for resolving fishery management issues. A more formal role for these entities, the clarification of fishing ground tenure and access rights, and support for the development and enforcement of local fishing rules can further local management. The socioeconomic condition of fishers, their fear of losing landing sites, and the continued perception of the imposition of a marine reserve pose barriers to initiatives seeking to further local level management.     

Experimental Investigation of TARMAX Model for Modeling of Hydrodynamic Forces on Cylinder-like Structures

A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous (ARMAX) input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this paper, the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input a...     

双通线加热的热力学及实验分析(英文)

The present investigation deals with process analysis of oxy-acetylene flame assisted double pass line heating for varying plate thickness. oxy-acetylene flame as the heat source for multi pass line heating to achieve 3-D bending of plates with varying thicknesses was studied. The oxy-acetylene flame was modeled as the moving heat source in the FEM analysis. The transient thermal histories were predicted taking into account the temperature dependent thermo-mechanical properties. A comparative study between single pass and double pass line heating residual deformation was also carried out. The temperature distribution and residual deformations predicted by the numerical model developed in the present work compared fairly well with those of the experimental ones.     

Dynamic interaction of parallel moving ships in close proximity

Nowadays,there are many studies conducted in the field of marine hydrodynamics which focus on two vessels traveling and floating in sufficiently close proximity to experience significant interactions.The hydrodynamic behavior of parallel moving ships in waves is an interesting and important topic of late.A numerical investigation has been carried out for the prediction of wave exciting forces and motion responses of parallel moving ships in regular waves.The numerical solution was based on 3D distribution technique and using the linear wave theory to determine the exciting forces and ship＇s motion.The speed effects have been considered in the Green function for more realistic results.The numerical computations of wave exciting forces and motion responses were carried out for a Mariner and Series 60 for the purpose of discovering different Froude numbers and different separation distances in head sea conditions.Based on the numerical computations,it was revealed that the sway,roll and yaw have a significant effect due to hydrodynamic interaction.